Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY; Connector Side-1: IDC; Connector Side-2: TAG-CONNECT; Shielding: NO;
Median Price
$43.000
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Nova Conductors
Vyrian
Holdelec - ElecDif-Pro
Advanced Electronics
$5.157
$4.899
Aztec Data Supply Inc.
$6.980
AZTECH Wire
$8.560
$8.220
$8.060
$7.900
Continental Prestige Electronics
$42.140
Argo Parts USA
Netroflash
$40.850
$39.990
Lucentia Tech
$13.904
Electrical Wires & Cables TC2050-IDC-430 attributes and parameters. Explore more Electrical Wires & Cables devices from Tag Connect
Connector Side-1:
Connector Side-2:
Connector Accessory Type:
Shielding:
Tag-Connect cables provide a simple, secure way to connect debuggers, programmers and test equipment to your PCBs while saving space and cost on every board. Our patented connectors connect directly to a tiny footprint of pads and holes in your PCB – No mating connector or component is required, the PCB itself is the mating connector. The footprint can be about the size of an 0805 resistor, and being just a footprint (no special PCB finish required), it also has no height which means Tag-Connect footprints can often be placed on the back of a PCB or somewhere where physical space is otherwise constrained. Tag-Connect thus eliminates the need for a programming / test header or JTAG connector on your PCB, saving you both the cost of the connector and potentially a most of PCB real-estate traditionally required. Our connectors use tried and tested pogo-pins (spring-pins) to make a reliable electrical connection – a connection you can trust – for as long as is required. When you’re done, the Tag-Connector is disconnected and is suitable for repeated use just like a conventional connector, in fact the spring-pins in our cycle testing easily last for well over 100,000 operations. Typically, it’s the ribbon cable that is the part that fails first. Traditional Tag-Connect cables are currently available in two versions: ‘Legged’ and “No Legs”. Both have a Tag-Connect connector on one end, and a traditional connector on the other. We have solutions for just about every family of popular MCU, DSP, PSoC and programmable devices. We also have an exciting new family called Edge-Connect™ that save Tag-Connect footprints are found everywhere, there’s very likely several products in your home and office and garage that use them such as coffee machines, appliances, garage door openers, medical devices, blenders, in fact if it uses an MCU or an FPGA, there’s a fair chance it uses Tag-Connect. Our footprints are frequently found on popular eval boards from big-name semiconductor companies such as TI (launchpads), Microchip (Atmel), Renesas, Nordic, Maxim, Analog, Silicon Labs, Intel, etc.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
261
Deltrol Controls
Other Relays;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
NXP Semiconductors
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
Nte Electronics
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Cheng-yi Electronic
115101-19-M30.0
Amphenol
CABLE ASSEMBLY;
12787
Helukabel
WIRE AND CABLE;
M22759/32-18-9
Defense Logistics Agency
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Additional Features: STANDARD: MIL-W-22759; Conductor Finish: TIN; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE;
M16878/4-BJE-9
Standard Wire & Cable
M16878/4-BJE-9 by Standard Wire & Cable is a MIL-approved stranded wire with silver finish, PTFE insulator, and copper conductor. Rated for 600V, it operates up to 200°C. Ideal for electrical applications requiring flexibility like cords and fixtures.
APAPA22K305
JST
APAPA22K305 by JST is a UL-approved electrical wire with 22 AWG gauge, rated for 250V and 3A current. It features connectors SPHD-001T-P0.5 on both sides, making it ideal for various applications requiring reliable power transmission in compact spaces.
RJF72G00
The Amphenol RJF72G00 is an IEC-approved communication cable with RJ45 connectors on both sides. It operates b/w -40°C to 85°C, making it suitable for various applications requiring reliable connectivity in challenging environments. With 8 conductors, this cable ensures secure and efficient data transmission.
55A0111-30-2
TE Connectivity's 55A0111-30-2 is a flexible cord and fixture wire with 600V rated voltage, TIN conductor finish, and -65 to 200°C operating temperature range. Ideal for applications requiring a max wire size of 30 AWG, such as electrical wiring in various industries.
T4161110005-004
TE Connectivity T4161110005-004 is a shielded communication cable with 22 AWG copper alloy conductor, rated for 60V and 4A. It features PVC insulation, suitable for straight mounting with M12 screw option. Ideal for applications requiring reliable signal transmission in industrial settings.
6010CSL005
Alpha Wire
Alpha Wire 6010CSL005 is a 300V stranded cable with PVC jacket, CE/CSA/UL approvals. Featuring tin finish copper alloy conductor, it has 6 conductors in 22 AWG, shielded for communication/control applications. Operating from -20 to 75°C, it offers 0.326mm² cross-section area and 0.054 ohm resistance.
18642
WIRE AND CABLE; Rated Voltage: 450 V; Shielding: NO; Conductor Material: BARE COPPER; Jacket Material: POLYURETHANE; Additional Features: STANDARDS: DIN VDE 0285-525-2-21; DIN EN 50525-2-21;
135101-02-72.00
M27500-22SB2U23
TE Connectivity's M27500-22SB2U23 is a 600V rated cable with TIN finish, suitable for temperatures ranging from -65°C to 150°C. Featuring 22 AWG copper alloy conductor, it is ideal for applications requiring MIL-DTL-27500 cables such as flexible cord and fixture wire installations.
21020-0211
Molex
The Molex 21020-0211 is a flat flexible cable with 20 conductors, rated for 30V and 0.5A. It features tin-finished copper conductors, polyimide insulation, and operates b/w -40 to 80°C. Ideal for applications requiring a compact design with high flexibility and temperature resistance.
PMHDMF-2
Infinite Electronics International
87610601000
Belden
Belden 87610601000 is a UL-approved flexible cord with 2 conductors, tinned copper construction, and PVC jacket. It has a rated voltage of 300V, suitable for applications requiring a temperature range of -20 to 60°C. With a wire gauge of 22 AWG and stranding of 7x30, it is ideal for electrical wiring in various settings.
12814
Helukabel 12814 is a CONTROL CABLE with 5 STRANDED BARE COPPER conductors, rated at 600V. It has CE, CSA, UL approvals and a POLYURETHANE jacket. Suitable for applications like conveyor belts and tooling machines, it operates b/w -40 to 80°C temperatures.
P314-012
Tripp Lite
923345-01-C
3m Electronic Products Division
3m Electronic Products Division's 923345-01-C is a SOLID wire with AWG 22 gauge, 0.326 mm2 cross section area, and tinned copper conductor. Ideal for flexible cord and fixture wire applications due to its 1X22 stranding and 0.003 mm length.
3051/1WH005
Alpha Wire 3051/1WH005 is a CSA/UL approved solid wire with TIN finish, rated for 300V. Ideal for flexible cord applications, it features PVC insulation, copper alloy conductor, and operates b/w -40 to 105°C.
RF179-74SP3-72RP2-0400
Samtec
Samtec RF179-74SP3-72RP2-0400 is a communication cable with FLUORINATED ETHYLENE PROPYLENE jacket, SILVER finish, and POLYTETRAFLUOROETHYLENE insulator. Operating from -50 to 165 °C, it has BNC and MCX plugs for various applications requiring shielding and copper alloy conductors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TC2030-MCP-NL
Tag-connect
CABLE ASSEMBLY; Connector Side-1: TAG6PIN; Connector Side-2: RJ12; Shielding: NO; DIN Conformity: NO; MIL Conformity: NO;
TC2050-IDC-NL
CABLE ASSEMBLY; Connector Side-1: IDC; Connector Side-2: TAG-CONNECT; Shielding: NO; Additional Features: PLUG-OF-NAILS;
TC2030-IDC-NL
CABLE ASSEMBLY; Connector Side-1: TAG6PIN; Connector Side-2: IDC; Shielding: NO; Additional Features: PLUG-OF-NAILS;
TC2050-IDC
CABLE ASSEMBLY; Connector Side-1: IDC CONNECTOR; Connector Side-2: 10P TAG-CONNECT; Shielding: NO;
TC2030-IDC
TC2030-CTX
CABLE ASSEMBLY; Connector Side-1: CORTEX DEBUG 10P; Connector Side-2: TC2030 6P; Shielding: NO; Additional Features: PLUG-OF-NAILS;
TC2070-IDC-NL
TC2070-IDC
CABLE ASSEMBLY; Connector Side-1: 14P PLUG; Connector Side-2: IDC FEMALE; Shielding: NO; Wire & Cable Name: FLAT CABLE; DIN Conformity: NO;
TC2050-IDC-430-NL
Tag Connect
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved