Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY;
Median Price
$4.300
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$3.880
1k+ parts
$3.670
10k+ parts
-
DigiKey
$4.780
Master Electronics
$3.590
$3.290
$3.190
Shortec Electronics
Dynamic Solutions
Native Components
$0.031
$0.030
Northwest PG Solutions
Perfect Parts
Assembly Products 1401828:0021 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Connector Accessory Type:
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
1N4148
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Taitron Components
Transys Electronics
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
929974-1
TE Connectivity
TE Connectivity's 929974-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 40A current. Ideal for applications requiring 0.047-0.082 inch cable entry and operating temperatures b/w -40 to 130 °C.
50079-8100
Molex
The Molex 50079-8100 is a female crimp contact with bellowed design, suitable for 28-26 AWG wires. It has a terminal length of 0.079 inch and can be used in applications such as the 51021 housing assembly products with 0.0409 inch cable entry.
DF1B-2428SCA
Hirose Electric
DF1B-2428SCA by Hirose Electric is a CRIMP terminal CONTACT with FEMALE gender, made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for applications requiring reliable electrical connections in various assembly products.
66506-3
TE Connectivity 66506-3 is a male signal contact with crimp terminal type. It has a wire gauge of 20 AWG, rated for 2A current, and made of brass material. Ideal for use in AMPLIMITE HDP-20 and CPC connectors with operating temperatures ranging from -55 to 105 °C.
1-929939-1
CONNECTOR ACCESSORY; Manufacturer Series: 929939;
160773-6
TE Connectivity 160773-6 is a CRIMP terminal with wire gauge 15 AWG, suitable for DISCRETE WIRE cables. It has a contact gender of FEMALE and mounting style STRAIGHT, made of BRASS material. Operating temperature ranges from -40 to 110 °C, with cable entry ranging from 0.09 to 0.13 inch.
1060-14-0122
TE Connectivity's 1060-14-0122 contact features crimp terminal type, stamped contact design, and copper alloy material. With a wire gauge of 14 AWG and rated current of 13 A, it is ideal for applications requiring male round pin-socket contacts in assembly products.
SYM-001T-P0.6(N)
J S T Mfg
SYM-001T-P0.6(N) by J S T Mfg is a CRIMP terminal with approvals from TUV and UL. It supports wire sizes from 28 AWG to 22 AWG, rated for 3A current at 250V AC/DC. Ideal for applications requiring male contacts in straight mounting style with operating temperatures ranging from -25°C to 85°C.
3036916
Phoenix Contact
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Approvals (V): UL; DIN Conformity: NO; Material: COPPER; IEC Conformity: NO;
1418882-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 120 Cel;
855-9900
Wago
M85049/85-08W02
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
3032457
685030101
CONNECTOR ACCESSORY;
281934-4
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; IEC Conformity: NO; MIL Conformity: NO; Material: LSR; Maximum Operating Temperature: 130 Cel;
350690-1
TE Connectivity 350690-1 is a universal mate-n-lok plug and cap housing with crimp terminals. Rated for 600V AC, it has approvals from CSA, UL, and VDE. Featuring stranded construction, it supports wire gauge up to 18 AWG for applications requiring a male power contact design.
MUSB-2A111-024-BP
Amphenol
The Amphenol MUSB-2A111-024-BP is a dust cover made of silicone rubber with mounting options for #4-40 screws. It has a wide operating temperature range from -40°C to 105°C, making it suitable for various assembly applications. This product is ideal for protecting connectors in harsh environments.
2064600021
AT60-20-0122
5205980-4
TE Connectivity's 5205980-4 is a screw retainer kit for metal shell connectors. It supports wire sizes up to 0 AWG, made of carbon steel, and mounts with #4-40 screws. Ideal for assembly products in various industrial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1401682
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Material: STEEL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: DIN RAIL;
1401815
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -40 Cel; Approvals (V): UL; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO;
1401637
TERMINAL BLOCK ACCESSORY; Material: PA; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: END CLAMP; MIL Conformity: NO;
1401695
1401828:0011
TERMINAL BLOCK ACCESSORY; Approvals (V): DIN; UL; Additional Features: STANDARD: DIN EN 61010-1; Material: POLYAMIDE; DIN Conformity: YES; MIL Conformity: NO;
1401828:0001
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: MARKING ITEM; Material: POLYAMIDE; DIN Conformity: NO;
1401145
TERMINAL BLOCK ACCESSORY; Assembly Item Name: INSERTION BRIDGE; DIN Conformity: NO; MIL Conformity: NO; Manufacturer Series: 1401145; IEC Conformity: NO;
1401174
1401831
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1401831;
1401763
1401187
1401789
1401608
1401161
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Assembly Item Name: JUMPER ITEM; DIN Conformity: NO; IEC Conformity: NO;
1401802
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1401802; Approvals (V): UL; Assembly Item Name: MARKING ITEM; Maximum Operating Temperature: 100 Cel; Material: PA;
1401132
TERMINAL BLOCK ACCESSORY; Rated Current: 20 A; DIN Conformity: NO; Assembly Item Name: INSERTION BRIDGE; MIL Conformity: NO; IEC Conformity: NO;
1401158
TERMINAL BLOCK ACCESSORY; Assembly Item Name: INSERTION BRIDGE; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO;
1401404
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1401404;
1401802:0061
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved