Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 02-06-1101 CONTACT features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and 0.062-0.12 inch cable entry with wire sizes ranging from 24 to 18 AWG.
Median Price
$0.029
Lifecycle Status
Suppliers In-Stock
47
In-Stock Inventory
1k+
Newark
1+ parts
$0.053
100+ parts
$0.037
1k+ parts
$0.035
10k+ parts
-
DigiKey
$0.100
$0.047
$0.040
Element14
$0.141
$0.060
$0.051
TTI
$0.025
PEI Genesis
Heilind Electronics
$0.026
Farnell
$0.030
Verical
Mouser Electronics
Powell Electronics
NEP Electronics
TTI Europe
$0.028
Sager
Interstate Connecting
RS (Exports)
$0.063
$0.049
Avnet
Chip1Stop
Bürklin Elektronik
$0.024
RS Americas
PSC Electronics
DF Sales Co.
Digiode
$0.031
Nova Conductors
$0.039
Maritex
TME
$0.050
Voyager Components
$0.095
IBS Electronics
Vyrian
Rutronik
A2Z Electronics, Inc.
Sensible Micro Corp
EMSNET
Electronic Treasures
NAC Semi
Goldney Electronics S.L.
Classic Components Corporation
Semtec, LLC
Pegasus Components GmbH
Bristol Electronics
VNN
Connector Distribution Corp
Right Parts Inc.
ACDS - Activité Composants Distribution Service
Cyclops Electronics Ltd
Mil-Aero Solutions, Inc.
FDH Electronics
Semicontronic
$0.020
$0.019
Corphita
J3
$0.033
Advanced Electronics
$0.034
$0.032
Argo Parts USA
$0.036
Netroflash
Modulus Dynamics
$0.038
Aztec Data Supply Inc.
$2.545
Abacus Technologies
Assy Fe
EMSNET (Excess)
Kepictronics
Lee Johnson Sales, Inc.
GreenTree Electronics
Continental Prestige Electronics
$0.027
Robosynatics
Lucentia Tech
Cyclops Electronics Ltd (Excess)
The substantial thickness of the finish provides durability and protection against corrosion, extending the lifespan of the product.
The crimp terminal type ensures a secure connection between wires, reducing the likelihood of malfunctions or disconnections.
The small minimum cable entry size allows for compatibility with a wide range of cables, providing versatility in application.
The chain contact design offers a reliable electrical connection and minimizes signal interference for consistent performance.
The specific assembly item name makes it easy to identify and order the correct component for assembly projects.
With a minimum wire size of 24 AWG, this product is suitable for use with smaller gauge wires, increasing its compatibility with various devices.
The maximum wire size of 18 AWG allows for use with thicker wires, accommodating a wider range of wire gauges for flexibility in applications.
The larger maximum cable entry size enables easy installation and compatibility with a variety of cable sizes, simplifying the assembly process.
The female contact gender ensures compatibility with male connectors, making it suitable for a diverse range of connection setups.
The straight mounting style provides a simple and secure installation method, ensuring proper alignment and stability in the assembly.
The round pin-socket contact style offers a secure and reliable connection, minimizing signal loss and enhancing overall performance.
Constructed from brass, this product offers excellent conductivity and corrosion resistance, ensuring long-lasting performance in various environments.
Assembly Products 02-06-1101 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
02-06-1101 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
Microsemi
Nexperia
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
L17DM53745-7
Amphenol
The Amphenol L17DM53745-7 is a male contact assembly product with a round pin-socket contact style made of brass. It has a rated current of 20A and can operate at temperatures up to 155°C. This straight mounting terminal type with 20 finish thickness is commonly used in industrial applications requiring reliable electrical connections.
1050017:0001
Phoenix Contact
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO; Manufacturer Series: 1050017:0001; Assembly Item Name: TERMINAL MARKER;
770520-3
TE Connectivity's 770520-3 contact features crimp terminal type, stamped contact design, and copper alloy material. With a wire gauge of 16 AWG and rated current of 17A, it is ideal for applications requiring a female round pin-socket contact style. The contact can withstand temperatures from -40 to 125°C, making it suitable for various assembly products.
50058-8000
Molex
The Molex 50058-8000 is a female crimp contact with bellowed design, made of phosphor bronze. It has a finish thickness of 35 and supports wire sizes from 32 to 28 AWG. Ideal for use in applications requiring the 51021 housing with a min cable entry of 0.02 inch and max cable entry of 0.039 inch.
DF11-22SCFA(04)
Hirose Electric
CONNECTOR ACCESSORY;
350551-6
The TE Connectivity 350551-6 is a universal mate-n-lok plug/socket housing with stranded construction and crimp terminals. Rated for 600V AC/DC, it has a max temp of 105°C and min temp of -55°C. With approvals from CSA and VDE, it's ideal for power applications with wire sizes ranging from 20-14 AWG.
SXA-001T-P0.6
J S T Mfg
SXA-001T-P0.6 by J S T Mfg is a UL approved XA connector with crimp terminals for 28-22 AWG wires, rated at 3A and 250V AC/DC. It features female contacts with 20 mohm resistance, suitable for applications requiring straight mounting and operating temperatures b/w -25 to 85°C.
43030-0003
The Molex 43030-0003 contact is designed for use with terminals 43025, 43645, and 44133. It features a finish thickness of 30, crimp terminal type, and chain contact design. Ideal for applications requiring a female contact gender, straight mounting style, and square pin-socket contact style.
13663727
Aptiv
SWPR-001T-P025
SWPR-001T-P025 by J S T Mfg is a UL approved CONTACT for JWPF SERIES CONNECTOR. It features CRIMP terminal type, 26-22 AWG wire size compatibility, and 3A rated current. Ideal for applications requiring FEMALE contacts with COPPER ALLOY material in STRAIGHT mounting style.
17E-1724-2
CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Material: ABS; Assembly Item Name: BACKSHELL; MIL Conformity: NO;
43031-0007
Molex 43031-0007 CONTACT features loose contact design, suitable for 24-20 AWG wires. With a 0.073" min cable entry and 0.137" terminal length, it is ideal for use with 43020, 43640, and 44300 assemblies. Made of phosphor bronze, this male contact has a straight mounting style.
08-50-0032
Molex 08-50-0032 contact features crimp terminal type, compression contact style, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 22 AWG. Suitable for straight mounting in assembly products with a finish thickness of 120 and 0.062 inch max cable entry.
5748676-3
TE Connectivity 5748676-3 is a backshell assembly product with 3 shell sizes, shielding, and zinc alloy material. It supports plug/receptacle usage with min cable entry of 0.255" and max operating temperature of 105°C. Ideal for applications requiring secure mounting using #4-40 screws and accommodating up to 0 AWG wire size.
RC16M23K
Souriau-sunbank Connection Technologies
RC16M23K by Souriau-sunbank is a CRIMP terminal CONTACT with MACHINED design for 750V AC, 13A current. It's used in RC/RM SERIES CONNECTOR for SIGNAL applications, accepting wire sizes from 30-14 AWG and COAXIAL cables up to 3.2".
17790000011
Harting Electronics & Kg
10141272-313ALF
AMPHENOL ICC
The Amphenol Icc 10141272-313ALF contact assembly product features a crimp terminal type, rated for 4A current at 48V DC/AC. With a contact resistance of 30 mΩ, it is suitable for applications requiring a max wire size of 24 AWG and operating temperatures ranging from -40°C to 130°C.
W3S
W3S by TE Connectivity is an Assembly Product designed for DT SERIES applications. With a temperature range of -55 to 125°C, it supports up to 0 AWG wire size. Made of PBT material, it is ideal for power and signal assemblies requiring high durability.
SYM-001T-P0.6(N)
SYM-001T-P0.6(N) by J S T Mfg is a CRIMP terminal with approvals from TUV and UL. It supports wire sizes from 28 AWG to 22 AWG, rated for 3A current at 250V AC/DC. Ideal for applications requiring male contacts in straight mounting style with operating temperatures ranging from -25°C to 85°C.
1731110060
Molex 1731110060 BACKSHELL is ideal for FCT D-SUB applications. Features include 0.315" min and 0.492" max cable entry, ZINC ALLOY material, -35 to 100°C operating temp range, and SCREW mounting options (4-40 UNC).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
02-06-1103
Molex 02-06-1103 contact features brass material, crimp terminal type, and round pin-socket design. Suitable for applications requiring female contact gender with wire sizes ranging from 24 AWG to 18 AWG. Ideal for assembly products with a min cable entry of 0.06" and max of 1.52".
02-06-1132
CONNECTOR ACCESSORY; IEC Conformity: NO; Finish Thickness: 20; DIN Conformity: NO; Contact Style: ROUND PIN-SOCKET; Minimum Cable Entry: .04 inch;
02-06-2103
CONNECTOR ACCESSORY; Material: BRASS; Maximum Wire Size: 18 AWG; Terminal Type: CRIMP; DIN Conformity: NO; Finish Thickness: 510;
02-06-5100
Molex 02-06-5100 is a female contact with round pin-socket design. It supports wire sizes from 24 AWG to 18 AWG and has a max cable entry of 1.52". Ideal for crimp terminals in assembly products requiring straight mounting with brass material.
02-06-5103
CONNECTOR ACCESSORY; Contact Design: LOOSE; IEC Conformity: NO; Assembly Item Name: CONTACT; Minimum Wire Size: 24 AWG; Terminal Type: CRIMP;
02-06-2101
Molex 02-06-2101 CONTACT features CRIMP terminal type, suitable for 24-18 AWG wire sizes. Made of BRASS, it has ROUND PIN-SOCKET contact style and MALE gender. Ideal for STRAIGHT mounting in Assembly Products with finish thickness of 510.
02-06-5135
CONNECTOR ACCESSORY; Finish Thickness: 15; Contact Gender: FEMALE; Assembly Item Name: CONTACT; Maximum Cable Entry: .09 inch; Material: BRASS;
02-06-6102
CONNECTOR ACCESSORY; Terminal Type: CRIMP; DIN Conformity: NO; Usage: 1.57/.062 DIA. SERIES HOUSING; Material: BRASS; Mounting Style: STRAIGHT;
02-06-6103
CONNECTOR ACCESSORY; IEC Conformity: NO; Finish Thickness: 15; MIL Conformity: NO; Contact Style: ROUND PIN-SOCKET; Additional Features: MATING: GOLD OVER NICKEL (30), TERMINATION: GOLD FLASH OVER NICKEL (30);
02-06-6130
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Contact Gender: MALE; Minimum Wire Size: 30 AWG; Mounting Style: STRAIGHT; Contact Style: ROUND PIN-SOCKET;
02-06-7103
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Assembly Item Name: CONTACT; Contact Style: SQ PIN-SKT; IEC Conformity: NO; Material: BRASS;
02-06-1131
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Contact Gender: FEMALE; DIN Conformity: NO; Contact Style: ROUND PIN-SOCKET; Minimum Wire Size: 30 AWG;
02-06-2132
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH - TERMINATION: TIN; Assembly Item Name: CONTACT; IEC Conformity: NO; Mounting Style: STRAIGHT; Minimum Wire Size: 30 AWG;
0206147
TERMINAL BLOCK ACCESSORY;
0206150
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 0206150;
02-06-1141
CONNECTOR ACCESSORY; Terminal Type: CRIMP; DIN Conformity: NO; Maximum Wire Size: 24 AWG; IEC Conformity: NO; Maximum Cable Entry: .09 inch;
02-06-1143
CONNECTOR ACCESSORY; Maximum Wire Size: 24 AWG; Minimum Cable Entry: .04 inch; Terminal Type: CRIMP; Assembly Item Name: CONTACT; DIN Conformity: NO;
02-06-1104
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Maximum Cable Entry: .12 inch; Usage: 1.57/.062 DIA. SERIES HOUSING; Additional Features: TIN PLATED; DIN Conformity: NO;
02-06-1105
CONNECTOR ACCESSORY; MIL Conformity: NO; Minimum Cable Entry: .06 inch; Assembly Item Name: CONTACT; Finish Thickness: 20; IEC Conformity: NO;
02-06-1118
CONNECTOR ACCESSORY; Minimum Cable Entry: .06 inch; Contact Gender: FEMALE; Additional Features: CONTACT FINISH: TIN; Minimum Wire Size: 24 AWG; DIN Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved