Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 02-06-2101 CONTACT features CRIMP terminal type, suitable for 24-18 AWG wire sizes. Made of BRASS, it has ROUND PIN-SOCKET contact style and MALE gender. Ideal for STRAIGHT mounting in Assembly Products with finish thickness of 510.
Median Price
$0.030
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.022
100+ parts
-
1k+ parts
10k+ parts
Newark
$0.048
$0.032
$0.028
Farnell
$0.052
$0.045
$0.043
Element14
$0.056
$0.049
$0.047
DigiKey
$0.100
$0.040
Arrow
$0.020
Heilind Electronics
$0.024
TTI
$0.017
NEP Electronics
Sager
Interstate Connecting
Master Electronics
Verical
$0.026
Mouser Electronics
TTI Europe
Avnet
RS Americas
$0.021
Chip1Stop
$0.031
RS (Exports)
$0.062
Vyrian
Digiode
TME
$0.029
$0.025
Component Electronics Inc.
$1.540
$1.150
$1.000
Bristol Electronics
IBS Electronics
Sensible Micro Corp
Pegasus Components GmbH
Electronic Treasures
SPM Sales
Connector Distribution Corp
Right Parts Inc.
Kallista Electronics Ltd
Prism Electronics
Corphita
Argo Parts USA
$0.034
$0.033
Netroflash
Continental Prestige Electronics
$0.096
$0.041
Eastek
$0.001
GreenTree Electronics
Perfect Parts
Assy Fe
Authorized Procurement Solutions
EMSNET (Excess)
Lee Johnson Sales, Inc.
The thick finish provides durability and protection, ensuring a long lifespan for the product.
Crimp terminals provide a secure connection, ensuring reliable performance in various applications.
The contact assembly allows for easy and efficient connections, making it convenient for assembly processes.
Support for a minimum wire size of 24 AWG ensures compatibility with smaller gauge wires, increasing versatility.
Support for a maximum wire size of 18 AWG accommodates larger gauge wires, making it suitable for a wide range of applications.
The male contact gender is common for providing connections and ensures compatibility with various female connectors.
The straight mounting style simplifies installation and allows for easy integration into different systems.
The round pin-socket contact style provides a reliable and consistent connection, minimizing the risk of signal loss or interruption.
Constructed from brass, the contact offers excellent conductivity, corrosion resistance, and durability, ensuring a high-quality and long-lasting product.
Assembly Products 02-06-2101 attributes and parameters. Explore more Assembly Products devices from Molex
Assembly Item Name:
Connector Accessory Type:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Digitron Semiconductors
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
Vishay Telefunken
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Excel (Suzhou) Semiconductor
WM-4S
TE Connectivity
TE Connectivity's WM-4S is a POWER AND SIGNAL WEDGE ITEM for DTM SERIES assemblies. It supports wire sizes up to 0 AWG, with a temp range of -55 to 125°C. Made of POLYBUTYLENE TEREPHTHALATE, it ensures reliable connections in various applications.
194340001
Molex
Molex 194340001 CONTACT features CRIMP terminal type, suitable for POWER design with 10 AWG wire size. Rated for 40A current at 500V DC voltage, it has a contact resistance of 30 mohm. Ideal for applications requiring FEMALE contacts with operating temperatures from -40 to 125 °C.
1-206062-4
TE Connectivity's 1-206062-4 CLAMP KIT features Shell Size 11, accommodates up to 0 AWG wire size, and has a max cable entry of 0.329". Ideal for straight mounting with polyethylene material, it uses a 5/8-24 UNEF-2B screw for installation in various assembly products.
1051430
Phoenix Contact
TERMINAL BLOCK ACCESSORY;
W4S-ZZ
W4S-ZZ by TE Connectivity is an Assembly Product for DT SERIES. It features a max operating temp of 125°C and min of -55°C. With a design for POWER AND SIGNAL, it supports wire sizes up to 0 AWG and is made of POLYBUTYLENE TEREPHTHALATE.
0462-209-16141
TE Connectivity's 0462-209-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 14 AWG wire and rated at 13A. Ideal for POWER applications requiring FEMALE contacts in STRAIGHT mounting style.
MUSB-2A111-024-BP
Amphenol
The Amphenol MUSB-2A111-024-BP is a dust cover made of silicone rubber with mounting options for #4-40 screws. It has a wide operating temperature range from -40°C to 105°C, making it suitable for various assembly applications. This product is ideal for protecting connectors in harsh environments.
5-66506-3
TE Connectivity 5-66506-3 is a male signal contact with brass material. It has a finish thickness of 30, supports wire gauge up to 20 AWG, and operates b/w -55°C to 105°C. Ideal for applications requiring crimp terminals with 0.05" to 0.06" cable entry.
12103881
Delphi Connection Systems
CONNECTOR ACCESSORY; DIN Conformity: NO; Minimum Cable Entry: .073 inch; Maximum Cable Entry: .079 inch; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: TIN;
030-2409-003
Itt Cannon
ITT Cannon 030-2409-003 is a crimp terminal contact with copper alloy material. It supports wire sizes from 22 AWG to 20 AWG, rated for 5A current. Ideal for flat cable applications requiring female signal contacts with blade pin-socket design.
3200030
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: FERRULE; DIN Conformity: NO; Maximum Operating Temperature: 105 Cel;
2-1105101-1
TE Connectivity's 2-1105101-1 is a crimp terminal contact designed for HTS SERIES HE and HA inserts. It supports wire sizes ranging from 20 AWG to 12 AWG, with a rated current of 16 A. Made of copper alloy, it offers low contact resistance (1 mohm) and is suitable for signal/power applications.
90119-2110
Molex 90119-2110 is a female contact with square pin-socket design. It supports wire sizes from 24 to 22 AWG and has a terminal length of 0.168 inch. Ideal for applications requiring crimp terminals in straight mounting style with finish thickness of 25.
DF13-3032SCF
Hirose Electric
DF13-3032SCF by Hirose Electric is a CRIMP terminal with POLYAMIDE insulator. Rated for 150V AC, it has a contact resistance of 30 mohm and can handle up to 1A current. Ideal for applications requiring FEMALE contacts, such as in UL-approved assemblies operating b/w -35°C to 85°C.
1534809-1
TE Connectivity 1534809-1 backshell has 3 shell sizes, shielding, and 0.189" min cable entry. Ideal for applications requiring steel material, it accommodates up to 0 AWG wire size with 0.433" max cable entry. Mounting options include screw and 14702 for secure installation.
643075-2
TE Connectivity 643075-2, an Assembly Product with UL approval, features MTA-100 connector usage. With a temp range of -40 to 85°C, it supports up to 0 AWG wire size. Made of polyamide, it is ideal for various electrical assembly applications.
2832991
CONNECTOR ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Manufacturer Series: 2832991; DIN Conformity: NO; Assembly Item Name: PROTECTIVE CAP;
222-500
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: MOUNTING ITEM;
50394-8051
50394-8051 by Molex features crimp terminal type, bellowed contact design, and phosphor bronze material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 24 AWG. Suitable for straight mounting with a max cable entry of 0.055 inch.
WM-6P
TE Connectivity's WM-6P is an Assembly Product for DTM SERIES. It operates b/w -55°C to 125°C, accommodating wire sizes up to 0 AWG. Designed for power and signal applications, it features Polybutylene Terephthalate material for robust performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
02-06-1101
Molex 02-06-1101 CONTACT features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and 0.062-0.12 inch cable entry with wire sizes ranging from 24 to 18 AWG.
02-06-1103
Molex 02-06-1103 contact features brass material, crimp terminal type, and round pin-socket design. Suitable for applications requiring female contact gender with wire sizes ranging from 24 AWG to 18 AWG. Ideal for assembly products with a min cable entry of 0.06" and max of 1.52".
02-06-1132
CONNECTOR ACCESSORY; IEC Conformity: NO; Finish Thickness: 20; DIN Conformity: NO; Contact Style: ROUND PIN-SOCKET; Minimum Cable Entry: .04 inch;
02-06-2103
CONNECTOR ACCESSORY; Material: BRASS; Maximum Wire Size: 18 AWG; Terminal Type: CRIMP; DIN Conformity: NO; Finish Thickness: 510;
02-06-5100
Molex 02-06-5100 is a female contact with round pin-socket design. It supports wire sizes from 24 AWG to 18 AWG and has a max cable entry of 1.52". Ideal for crimp terminals in assembly products requiring straight mounting with brass material.
02-06-5103
CONNECTOR ACCESSORY; Contact Design: LOOSE; IEC Conformity: NO; Assembly Item Name: CONTACT; Minimum Wire Size: 24 AWG; Terminal Type: CRIMP;
02-06-5135
CONNECTOR ACCESSORY; Finish Thickness: 15; Contact Gender: FEMALE; Assembly Item Name: CONTACT; Maximum Cable Entry: .09 inch; Material: BRASS;
02-06-6102
CONNECTOR ACCESSORY; Terminal Type: CRIMP; DIN Conformity: NO; Usage: 1.57/.062 DIA. SERIES HOUSING; Material: BRASS; Mounting Style: STRAIGHT;
02-06-6103
CONNECTOR ACCESSORY; IEC Conformity: NO; Finish Thickness: 15; MIL Conformity: NO; Contact Style: ROUND PIN-SOCKET; Additional Features: MATING: GOLD OVER NICKEL (30), TERMINATION: GOLD FLASH OVER NICKEL (30);
02-06-6130
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Contact Gender: MALE; Minimum Wire Size: 30 AWG; Mounting Style: STRAIGHT; Contact Style: ROUND PIN-SOCKET;
02-06-7103
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Assembly Item Name: CONTACT; Contact Style: SQ PIN-SKT; IEC Conformity: NO; Material: BRASS;
02-06-1131
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Contact Gender: FEMALE; DIN Conformity: NO; Contact Style: ROUND PIN-SOCKET; Minimum Wire Size: 30 AWG;
02-06-2132
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH - TERMINATION: TIN; Assembly Item Name: CONTACT; IEC Conformity: NO; Mounting Style: STRAIGHT; Minimum Wire Size: 30 AWG;
0206147
0206150
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 0206150;
02-06-2231
CONNECTOR ACCESSORY; Contact Style: ROUND PIN-SOCKET; Minimum Cable Entry: .04 inch; Minimum Wire Size: 30 AWG; Additional Features: CONTACT FINISH: TIN; Mounting Style: STRAIGHT;
02-06-2232
CONNECTOR ACCESSORY; Maximum Cable Entry: .09 inch; Minimum Wire Size: 30 AWG; Maximum Wire Size: 24 AWG; Contact Design: LOOSE; Minimum Cable Entry: .04 inch;
02-06-2131
CONNECTOR ACCESSORY; Material: BRASS; MIL Conformity: NO; Contact Gender: MALE; IEC Conformity: NO; Maximum Wire Size: 24 AWG;
02-06-2134
CONNECTOR ACCESSORY; Contact Design: CHAIN; Contact Style: ROUND PIN-SOCKET; DIN Conformity: NO; IEC Conformity: NO; Additional Features: CONTACT FINISH: TIN;
02-06-2201
CONNECTOR ACCESSORY; Minimum Cable Entry: .06 inch; Minimum Wire Size: 24 AWG; Contact Design: CHAIN; DIN Conformity: NO; Finish Thickness: 20;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved