Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 02-06-2103 CONTACT features CRIMP terminal type for 24-18 AWG wire sizes. Made of BRASS, it has ROUND PIN-SOCKET contact style and MALE gender. Ideal for Assembly Products, with STRAIGHT mounting style and 510 finish thickness.
Median Price
$0.076
Lifecycle Status
Suppliers In-Stock
48
In-Stock Inventory
1k+
Avnet
1+ parts
$0.037
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
$0.060
$0.051
Sager
$0.061
Interstate Connecting
$0.068
$0.057
Verical
$0.073
Arrow
$0.118
$0.066
RS Americas
$0.136
$0.103
$0.083
Mouser Electronics
$0.170
$0.108
$0.100
$0.084
Distrelec
$0.214
$0.075
PEI Genesis
Chip1Stop
$0.067
Farnell
NEP Electronics
$0.064
DigiKey
Element14
$0.147
$0.117
$0.112
RS (Exports)
$0.104
$0.096
Master Electronics
$0.078
$0.072
TTI
$0.059
$0.055
TTI Europe
$0.058
Newark
$0.159
$0.116
$0.091
PSC Electronics
Digiode
Vyrian
TestEquity
$0.070
Hutch & Son
$0.130
TME
$0.150
$0.077
Component Electronics Inc.
$0.190
$0.140
Bisco
$13.206
$0.200
IBS Electronics
$0.085
$0.082
ACDS - Activité Composants Distribution Service
R&J Components
MISTER SPROCKETS
First Choice Components Inc.
Prism Electronics
Diverse Electronics
EPE Components Inc.
Bristol Electronics
Resion
American Connector Supply Corp
Sunrise Surplus Inc.
Elcom Components
North Shore Components
Connector Distribution Corp
Right Parts Inc.
QIE Inc.
CirComp Electronics, Inc.
NAC Semi
Kallista Electronics Ltd
Corphita
$0.054
Argo Parts USA
$0.074
Continental Prestige Electronics
$0.179
$0.094
Benley Electronics
$1.750
Assy Fe
GreenTree Electronics
Authorized Procurement Solutions
Glotronic Ltd.
Netroflash
EMSNET (Excess)
The thick finish provides durability and protection, ensuring a long lifespan for the product.
Crimp terminals are known for their strong and reliable connections, making them ideal for use in assemblies where secure connections are crucial.
The main purpose of this product is to establish electrical connections, making it a crucial component in any assembly setup.
Supporting small wire gauges ensures compatibility with a wide range of wire sizes, providing flexibility in usage.
With the ability to accommodate larger wire sizes, this product is suitable for handling higher power requirements in assemblies.
Male connectors are commonly used for establishing connections with female counterparts, ensuring compatibility with a variety of devices.
The straight mounting style simplifies installation and connection processes, making it easier to integrate this product into assemblies.
The round pin-socket design offers a secure and reliable connection, minimizing the risk of signal loss or disconnection.
Brass is known for its excellent conductivity and corrosion resistance, ensuring optimal performance and longevity for the product.
Assembly Products 02-06-2103 attributes and parameters. Explore more Assembly Products devices from Molex
Assembly Item Name:
Connector Accessory Type:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
Silicon Standard
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
39-00-0223
Molex
Molex 39-00-0223 contact is designed for 5559, 30068, and 42475 series housings. It features a crimp terminal type with a square pin-socket contact design. Made of phosphor bronze, it supports up to 16 AWG wire size and has a 0.122" max cable entry.
33012-2002
The Molex 33012-2002 is a CRIMP CONTACT for 20-18 AWG wires, featuring FEMALE gender and SQUARE PIN-SOCKET style. It is used in Assembly Products for STRAIGHT mounting applications.
C01600U00001012
Amphenol
CONNECTOR ACCESSORY; Manufacturer Series: C016;
2-929939-1
TE Connectivity
TE Connectivity's 2-929939-1 is a DIN-approved CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 30A current. Ideal for power applications with operating temperatures ranging from -40 to 150°C.
184141-1
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 130 Cel; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel;
0-0205090-1
TE Connectivity's 0-0205090-1 is a CRIMP terminal with COPPER ALLOY material. It supports wire sizes from 24 AWG to 20 AWG, rated for 7.5A current. Ideal for AMPLIMITE applications due to its SIGNAL design and operating temperatures ranging from -55°C to 125°C.
50079-8000
The Molex 50079-8000 is an assembly product with a finish thickness of 35, featuring crimp terminal type and chain contact design. It is used with the 51021 housing for female contacts in straight mounting style. The bellowed contact material is made of phosphor bronze, suitable for wire sizes ranging from 28 AWG to 26 AWG.
02-09-2116
Molex 02-09-2116 is a male contact with round pin-socket design, made of brass material. It has a terminal length of 0.24 inch and supports wire sizes from 22 AWG to 18 AWG. Ideal for applications requiring a straight mounting style and crimp terminal type.
SXA-001T-P0.6
J S T Mfg
SXA-001T-P0.6 by J S T Mfg is a UL approved XA connector with crimp terminals for 28-22 AWG wires, rated at 3A and 250V AC/DC. It features female contacts with 20 mohm resistance, suitable for applications requiring straight mounting and operating temperatures b/w -25 to 85°C.
3030514
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Mounting Style: STRAIGHT; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: END COVER; DIN Conformity: NO;
5230
Keystone Electronics
CONNECTOR ACCESSORY;
030-2409-003
Itt Cannon
ITT Cannon 030-2409-003 is a crimp terminal contact with copper alloy material. It supports wire sizes from 22 AWG to 20 AWG, rated for 5A current. Ideal for flat cable applications requiring female signal contacts with blade pin-socket design.
SSH-003GA-P0.2-H
J S T Mfg's SSH-003GA-P0.2-H is a CRIMP terminal CONTACT with 32-28 AWG wire size range, rated for 1A current at 50V AC/DC. With approvals from CSA and UL, it operates b/w -25 to 85 °C, ideal for applications requiring FEMALE contacts in straight mounting style.
48099-4000
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 80 Cel; DIN Conformity: NO; IEC Conformity: NO; Usage: 67910-0002;
1-66103-8
TE Connectivity 1-66103-8 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 20 AWG, it supports up to 13A current. Made of brass, it's ideal for power and signal applications in temperatures ranging from -55 to 90°C.
1SET111009R0000
TE Connectivity's 1SET111009R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 16 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C and STRAIGHT mounting style, it ensures reliable connections in various setups.
3200014
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Maximum Operating Temperature: 105 Cel; Material: COPPER ALLOY; DIN Conformity: NO; MIL Conformity: NO;
1734634
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: CODING ELEMENT; IEC Conformity: NO; Approvals (V): GOST;
90119-0110
The Molex 90119-0110 is a C-GRID IIITM modular crimp housing with finish thickness of 15. It features compression contact style for female gender contacts, suitable for signal design. This assembly product supports wire sizes from 22 AWG to 24 AWG and cable entries ranging from 0.04" to 0.058", ideal for various electronic applications.
2200156
TERMINAL BLOCK ACCESSORY;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
02-06-1101
Molex 02-06-1101 CONTACT features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and 0.062-0.12 inch cable entry with wire sizes ranging from 24 to 18 AWG.
02-06-1103
Molex 02-06-1103 contact features brass material, crimp terminal type, and round pin-socket design. Suitable for applications requiring female contact gender with wire sizes ranging from 24 AWG to 18 AWG. Ideal for assembly products with a min cable entry of 0.06" and max of 1.52".
02-06-1132
CONNECTOR ACCESSORY; IEC Conformity: NO; Finish Thickness: 20; DIN Conformity: NO; Contact Style: ROUND PIN-SOCKET; Minimum Cable Entry: .04 inch;
02-06-5100
Molex 02-06-5100 is a female contact with round pin-socket design. It supports wire sizes from 24 AWG to 18 AWG and has a max cable entry of 1.52". Ideal for crimp terminals in assembly products requiring straight mounting with brass material.
02-06-5103
CONNECTOR ACCESSORY; Contact Design: LOOSE; IEC Conformity: NO; Assembly Item Name: CONTACT; Minimum Wire Size: 24 AWG; Terminal Type: CRIMP;
02-06-2101
Molex 02-06-2101 CONTACT features CRIMP terminal type, suitable for 24-18 AWG wire sizes. Made of BRASS, it has ROUND PIN-SOCKET contact style and MALE gender. Ideal for STRAIGHT mounting in Assembly Products with finish thickness of 510.
02-06-5135
CONNECTOR ACCESSORY; Finish Thickness: 15; Contact Gender: FEMALE; Assembly Item Name: CONTACT; Maximum Cable Entry: .09 inch; Material: BRASS;
02-06-6102
CONNECTOR ACCESSORY; Terminal Type: CRIMP; DIN Conformity: NO; Usage: 1.57/.062 DIA. SERIES HOUSING; Material: BRASS; Mounting Style: STRAIGHT;
02-06-6103
CONNECTOR ACCESSORY; IEC Conformity: NO; Finish Thickness: 15; MIL Conformity: NO; Contact Style: ROUND PIN-SOCKET; Additional Features: MATING: GOLD OVER NICKEL (30), TERMINATION: GOLD FLASH OVER NICKEL (30);
02-06-6130
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Contact Gender: MALE; Minimum Wire Size: 30 AWG; Mounting Style: STRAIGHT; Contact Style: ROUND PIN-SOCKET;
02-06-7103
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Assembly Item Name: CONTACT; Contact Style: SQ PIN-SKT; IEC Conformity: NO; Material: BRASS;
02-06-1131
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Contact Gender: FEMALE; DIN Conformity: NO; Contact Style: ROUND PIN-SOCKET; Minimum Wire Size: 30 AWG;
02-06-2132
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH - TERMINATION: TIN; Assembly Item Name: CONTACT; IEC Conformity: NO; Mounting Style: STRAIGHT; Minimum Wire Size: 30 AWG;
0206147
0206150
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 0206150;
02-06-2231
CONNECTOR ACCESSORY; Contact Style: ROUND PIN-SOCKET; Minimum Cable Entry: .04 inch; Minimum Wire Size: 30 AWG; Additional Features: CONTACT FINISH: TIN; Mounting Style: STRAIGHT;
02-06-2131
CONNECTOR ACCESSORY; Material: BRASS; MIL Conformity: NO; Contact Gender: MALE; IEC Conformity: NO; Maximum Wire Size: 24 AWG;
02-06-2134
CONNECTOR ACCESSORY; Contact Design: CHAIN; Contact Style: ROUND PIN-SOCKET; DIN Conformity: NO; IEC Conformity: NO; Additional Features: CONTACT FINISH: TIN;
02-06-2201
CONNECTOR ACCESSORY; Minimum Cable Entry: .06 inch; Minimum Wire Size: 24 AWG; Contact Design: CHAIN; DIN Conformity: NO; Finish Thickness: 20;
02-06-2202
CONNECTOR ACCESSORY; Minimum Wire Size: 24 AWG; Maximum Wire Size: 18 AWG; Contact Design: LOOSE; MIL Conformity: NO; Finish Thickness: 20;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved