Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY;
Median Price
$15.186
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
$3.092
100+ parts
$2.941
1k+ parts
$2.882
10k+ parts
-
RS (Exports)
$9.971
$9.423
Conrad
$14.021
DigiKey
$16.350
RS Americas
$17.300
$15.570
$14.870
Distrelec
$26.445
Airline Hydraulics
$36.840
Master Electronics
Verical
$9.886
TodayComponents
$10.490
$8.920
Electro Sonic
$20.180
$15.580
$15.080
Quotebeam
Shortec Electronics
Dynamic Solutions
VNN
Nova Conductors
ACDS - Activité Composants Distribution Service
IBS Electronics
Ampacity Inc.
$2.630
Advanced Electronics
$7.206
$6.557
$5.909
Neutron USA
$53.840
Argo Parts USA
Authorized Procurement Solutions
Glotronic Ltd.
Continental Prestige Electronics
Netroflash
Perfect Parts
Assembly Products 1401695 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Connector Accessory Type:
1401695 Connector Accessories trade compliance attributes, and parameters.
NSN
5975-14-472-4399, 5975144724399, 6640-01-653-9095, 6640016539095
NIIN
144724399, 016539095
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
3032457
Phoenix Contact
DF13-2630SCFA(81)
Hirose Electric
CONNECTOR ACCESSORY; Manufacturer Series: DF13;
3030174
TERMINAL BLOCK ACCESSORY; Rated Current: 24 A; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: PLUG-IN BRIDGE; IEC Conformity: NO;
HD16-9-1939SE-P080
TE Connectivity's HD16-9-1939SE-P080 is a FEMALE connector with 13A rated current and 250V DC voltage. It has a 0.053" to 0.12" cable entry range, operating from -55°C to 125°C. Ideal for POWER AND SIGNAL applications.
2856773
CONNECTOR ACCESSORY;
08-70-1031
Molex
Molex 08-70-1031 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 0.051-0.126 inch cable entry with wire sizes ranging from 24-18 AWG. Suitable for straight mounting in assembly products.
76823-0321
Molex 76823-0321 CONTACT features CRIMP terminal type, COPPER ALLOY material, and FEMALE contact gender. Ideal for applications requiring 16-14 AWG wire sizes such as 170001 and 171692 assemblies.
66506-3
TE Connectivity 66506-3 is a male signal contact with crimp terminal type. It has a wire gauge of 20 AWG, rated for 2A current, and made of brass material. Ideal for use in AMPLIMITE HDP-20 and CPC connectors with operating temperatures ranging from -55 to 105 °C.
293734-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -20 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 85 Cel; Wire Gauge (AWG): 0; Design: POWER;
1587826-2
TE Connectivity 1587826-2 SEALING ITEM has 0.216" min cable entry, -40 to 125°C temp range, and max wire size of 0 AWG. Ideal for applications requiring silicone material with 0.193" max cable entry.
1-929939-1
CONNECTOR ACCESSORY; Manufacturer Series: 929939;
5226
Keystone Electronics
828922-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 130 Cel; Wire Gauge (AWG): 0;
PX0733
Bulgin
CONNECTOR ACCESSORY; Assembly Item Name: CAP ITEM; Usage: PX0847; MIL Conformity: NO; IEC Conformity: NO; Maximum Operating Temperature: 70 Cel;
293726-1
500798001
Molex 500798001 is a UL-approved assembly product with finish thickness of 35.43µm. It features crimp terminal type, rated for 2A at 125V AC/DC. Ideal for applications like 51021 housing with female contact gender and blade pin-skt design.
WM-2SA
CONNECTOR ACCESSORY; Design: POWER AND SIGNAL; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Material: POLYBUTYLENE TEREPHTHALATE; Wire Gauge (AWG): 0;
1-2308272-7
TE Connectivity's 1-2308272-7 cable clamp features shell sizes of 5, zinc alloy material, and screw mounting option. With shielding and a min cable entry of 0.256", it supports cables up to 0 AWG. Ideal for applications requiring secure cable management in environments with temperatures ranging from -40°C to 90°C.
M23053/5-111-9
Alpha Wire
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; DIN Conformity: NO; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO;
45750-1112
45750-1112 by Molex is a crimp contact with copper alloy material. It supports wire sizes from 20 AWG to 18 AWG and has a finish thickness of 100. Ideal for applications with 5557, 30067, 43760, 44516, and 42474 series housings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1401682
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Material: STEEL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: DIN RAIL;
1401815
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -40 Cel; Approvals (V): UL; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO;
1401637
TERMINAL BLOCK ACCESSORY; Material: PA; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: END CLAMP; MIL Conformity: NO;
1401828:0011
TERMINAL BLOCK ACCESSORY; Approvals (V): DIN; UL; Additional Features: STANDARD: DIN EN 61010-1; Material: POLYAMIDE; DIN Conformity: YES; MIL Conformity: NO;
1401828:0001
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: MARKING ITEM; Material: POLYAMIDE; DIN Conformity: NO;
1401828:0021
1401145
TERMINAL BLOCK ACCESSORY; Assembly Item Name: INSERTION BRIDGE; DIN Conformity: NO; MIL Conformity: NO; Manufacturer Series: 1401145; IEC Conformity: NO;
1401174
1401831
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1401831;
1401763
1401187
1401789
1401608
1401161
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Assembly Item Name: JUMPER ITEM; DIN Conformity: NO; IEC Conformity: NO;
1401802
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1401802; Approvals (V): UL; Assembly Item Name: MARKING ITEM; Maximum Operating Temperature: 100 Cel; Material: PA;
1401132
TERMINAL BLOCK ACCESSORY; Rated Current: 20 A; DIN Conformity: NO; Assembly Item Name: INSERTION BRIDGE; MIL Conformity: NO; IEC Conformity: NO;
1401158
TERMINAL BLOCK ACCESSORY; Assembly Item Name: INSERTION BRIDGE; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO;
1401404
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1401404;
1401802:0061
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved