Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
QEC113 by Onsemi is a 3mm ROUND INFRARED LED with Peak Wavelength of 940nm. It has a Max Forward Current of 0.05A and Max Forward Voltage of 1.5V, suitable for applications requiring IR illumination in devices like sensors and remote controls.
Median Price
$0.100
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
1k+ parts
10k+ parts
-
Vyrian
$0.040
Digiode
$0.095
TEDSS.com
$0.110
Component Electronics Inc.
$0.380
$0.290
$0.250
Chip Stock
R&J Components
PC Components Company LLC
Bristol Electronics
NAC Semi
ComSIT Distribution GmbH
Prism Electronics
Corphita
$0.090
Corohmni
Andel Nordic
$9.692
$9.304
Kepictronics
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Problanco Electronics
A-Z Elektronik GmbH
Kulean Microsystems
TANS Electronics
SupplyDigital Components
Authorized Procurement Solutions
Supply Digital
UHIMA Technologies
Having a single configuration simplifies the setup and makes it easy to use.
Compact size allows for easy integration into various applications.
Provides a stable and reliable amount of current for consistent performance.
The peak wavelength of 940 nm is ideal for applications that require infrared light.
Being an infrared LED, this product is specifically designed for emitting infrared light efficiently.
Can withstand high temperatures, making it suitable for a wide range of operating conditions.
The round shape provides even distribution of light, making it versatile for different lighting applications.
Capable of operating in low temperatures without any performance issues.
With a maximum reverse voltage of 5V, this product offers protection against reverse polarity.
The use of GaAs semiconductor material ensures high efficiency and reliability.
The wide 18° viewing angle allows for a broader coverage area.
The radial mount feature simplifies the installation process and provides a secure mounting option.
Requires low forward voltage for operation, making it energy-efficient.
Infrared LEDs QEC113 attributes and parameters. Explore more Infrared LEDs devices from Onsemi
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Semiconductor Material:
Shape:
Size:
Viewing Angle:
QEC113 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
TSUS5402
Telefunken Microelectronics
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Voltage: 5 V; Maximum Forward Voltage: 2.7 V; Peak Wavelength (nm): 950;
SFH464E7800
Infineon Technologies
SFH464E7800 by Infineon Technologies is an Infrared LED with 660nm peak wavelength, 46° viewing angle, and GaAlAs semiconductor material. It operates b/w -40°C to 80°C, has a max forward current of 0.05A, and response time of 0.0000001s. Ideal for applications requiring precise infrared illumination in various environments.
TLN109
Toshiba
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -25 Cel; Maximum Reverse Voltage: 5 V;
TLN117-C
INFRARED LED; Nominal Output Power: 2.5 W; Peak Wavelength (nm): 940; Minimum Operating Temperature: -25 Cel; Size: 1.5 mm; Configuration: SINGLE;
LD274
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Voltage: 1.5 V; Maximum Response Time: .000001 s;
SFH400-3
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Voltage: 5 V; Spectral Bandwidth: 55 m; Viewing Angle: 12 deg;
SFH4728ASA01
Osram Opto Semiconductors
SFH4728ASA01 by Osram Opto Semiconductors is a 3.12mm IR LED with peak wavelength of 950nm, max forward current of 1.5A, and output power of 1910W. Ideal for applications requiring surface mount infrared illumination with a viewing angle of 50° and spectral bandwidth of 37m.
TLN117(F)
INFRARED LED; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -25 Cel; Maximum Forward Voltage: 1.3 V; Viewing Angle: 30 deg; Nominal Output Power: 2.5 W;
SLR963A
SLR963A by Onsemi is an Infrared LED with 0.1A max forward current, peak wavelength of 945nm, and 5V max reverse voltage. Ideal for surface mount applications in temperature range -25 °C to 80°C.
SLR732AV50
SLR732AV50 by Onsemi is an Infrared LED with 0.1A max forward current, 850nm peak wavelength, and 20° viewing angle. Ideal for applications requiring IR illumination in a temperature range of -25 °C to 80°C.
SFH4550-FW
Osram Opto Semiconductors SFH4550-FW is a 4.95mm IR LED with peak wavelength of 860nm, ideal for applications requiring fast response time (12ns), low forward current (0.1A), and narrow viewing angle (6°). Suitable for use in sensors, security systems, and communication devices.
SLR989A
SLR989A by Onsemi is an Infrared LED with a peak wavelength of 945nm and max forward current of 0.1A. It operates b/w -25 °C to 80°C, with a response time of 1µs. Ideal for applications requiring precise infrared illumination within a viewing angle of 20°.
LTE-C9501-E-T
Lite-on Technology
Lite-on Technology's LTE-C9501-E-T is a 1.4mm ROUND INFRARED LED with Peak Wavelength of 940nm and Max Forward Current of 0.06A. Ideal for applications requiring a viewing angle of 20deg, such as proximity sensors and optical switches due to its GaAs semiconductor material.
TSHA4401
Temic Semiconductors
INFRARED LED; Shape: ROUND; Minimum Operating Temperature: -55 Cel; Peak Wavelength (nm): 875; Nominal Output Power: 24 W; Additional Features: HIGH RELIABILITY;
SLR738AV60
SLR738AV60 by Onsemi is an Infrared LED with 0.1A max forward current, emitting at 850nm peak wavelength. Operating temp ranges from -25 °C to 80°C. Ideal for applications requiring a viewing angle of 26°, with a max reverse voltage of 3V and through-hole mounting feature.
TSSS2600
Vishay Intertechnology
Vishay Intertechnology's TSSS2600 is a single infrared LED with peak wavelength of 950nm and max forward current of 0.1A. Ideal for applications requiring rectangular shape, it operates b/w -40°C to 100°C, offering nominal output power of 20W in Tin/Silver terminal finish.
TLN117-B
INFRARED LED; Configuration: SINGLE; No. of Functions: 1; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel; Peak Wavelength (nm): 940;
SLR981A
SLR981A by Onsemi is an Infrared LED with peak wavelength of 945nm, forward current of 0.1A, and response time of 1µs. Ideal for applications requiring a viewing angle of 30°, spectral bandwidth of 45m, and operating temperatures from -25 °C to 80°C.
TSSF4500
Vishay Intertechnology's TSSF4500 is a 3.5mm INFRARED LED with peak wavelength of 870nm and max forward current of 0.1A. Ideal for applications requiring high output power up to 35W, operating in temperatures ranging from -40°C to 100°C.
HSM9-C320
Broadcom
INFRARED LED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
QEC112
INFRARED LED; Mounting Feature: RADIAL MOUNT; Maximum Forward Voltage: 1.5 V; No. of Functions: 1; Maximum Operating Temperature: 100 Cel; Configuration: SINGLE;
QEC121
INFRARED LED; Mounting Feature: RADIAL MOUNT; Shape: ROUND; Size: 3 mm; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel;
QEC122
INFRARED LED; Mounting Feature: RADIAL MOUNT; No. of Functions: 1; Maximum Forward Current: .05 A; Shape: ROUND; Configuration: SINGLE;
QEC123
INFRARED LED; Mounting Feature: RADIAL MOUNT; Configuration: SINGLE; Peak Wavelength (nm): 890; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .05 A;
QEC123.0044D
INFRARED LED; Mounting Feature: RADIAL MOUNT; Shape: ROUND; Maximum Forward Voltage: 1.7 V; Peak Wavelength (nm): 890; Maximum Forward Current: .05 A;
QEC112.C4A0
Qt Optoelectronics
INFRARED LED; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Shape: ROUND; Maximum Forward Current: .05 A; Size: 3 mm;
QEC112.C4R0
INFRARED LED; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .05 A; Shape: ROUND; Size: 3 mm;
QEC112.C6A0
INFRARED LED; Minimum Operating Temperature: -40 Cel; Size: 3 mm; Peak Wavelength (nm): 940; Maximum Forward Current: .05 A; Shape: ROUND;
QEC112.C6R0
INFRARED LED; Maximum Forward Current: .05 A; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Configuration: SINGLE; Size: 3 mm;
QEC113.C4R0
INFRARED LED; Maximum Forward Current: .05 A; Maximum Operating Temperature: 100 Cel; No. of Functions: 1; Size: 3 mm; Shape: ROUND;
QEC113.C6A0
INFRARED LED; Configuration: SINGLE; Shape: ROUND; Size: 3 mm; Maximum Forward Current: .05 A; Peak Wavelength (nm): 940;
QEC113.C6R0
INFRARED LED; No. of Functions: 1; Peak Wavelength (nm): 940; Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Size: 3 mm;
QEC112C4A0
INFRARED LED; Maximum Operating Temperature: 100 Cel; Size: 3 mm; Maximum Forward Current: .05 A; Shape: ROUND; Peak Wavelength (nm): 940;
QEC112C4R0
INFRARED LED; Maximum Forward Current: .05 A; Peak Wavelength (nm): 940; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Maximum Operating Temperature: 100 Cel;
QEC112C6A0
INFRARED LED; Peak Wavelength (nm): 940; Maximum Forward Current: .05 A; Shape: ROUND; No. of Functions: 1; Minimum Operating Temperature: -40 Cel;
QEC112C6R0
INFRARED LED; Configuration: SINGLE; No. of Functions: 1; Maximum Forward Current: .05 A; Minimum Operating Temperature: -40 Cel; Size: 3 mm;
QEC113C4A0
INFRARED LED; No. of Functions: 1; Size: 3 mm; Maximum Operating Temperature: 100 Cel; Shape: ROUND; Peak Wavelength (nm): 940;
QEC113C6A0
INFRARED LED; Shape: ROUND; Maximum Forward Current: .05 A; Configuration: SINGLE; Size: 3 mm; No. of Functions: 1;
QEC113C6R0
INFRARED LED; Configuration: SINGLE; Shape: ROUND; No. of Functions: 1; Size: 3 mm; Peak Wavelength (nm): 940;
Fairchild Semiconductor
INFRARED LED; No. of Functions: 1; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .05 A; Shape: ROUND; Configuration: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved