Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP81075MNTXG by Onsemi is a MOSFET Gate Driver with 8 terminals, suitable for automotive applications. It operates b/w -40 to 140°C, with a supply voltage range of 8.5-20V. This driver has a turn-on/off time of 0.05us and consumes 1.8mA max supply current.
Median Price
$2.048
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
DigiKey
1+ parts
$2.710
100+ parts
$1.656
1k+ parts
$1.530
10k+ parts
-
Mouser Electronics
$1.660
$1.490
$1.470
Rochester
$1.240
$1.110
$1.050
Verical
$1.387
$1.313
Nova Conductors
$2.260
Digiode
$3.363
Maritex
$3.412
$2.061
$1.740
Chip Stock
Vyrian
Semicontronic
$1.480
$1.443
$1.436
Ampacity Inc.
$1.500
Corohmni
$1.655
Argo Parts USA
$2.112
Continental Prestige Electronics
$2.070
Corphita
$3.186
Perfect Parts
Futuretech Components
TANS Electronics
Kepictronics
Microchip USA
Lixinc
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
UHIMA Technologies
Bastille Electronics
Plastic/epoxy material provides durability and reliability for long-term use.
Enables easy and efficient installation on circuit boards.
Allows for flexibility in different voltage applications.
Wide range of supply voltage options for versatility in usage.
Can withstand high temperatures, making it suitable for various environments.
Matte tin finish provides good conductivity and corrosion resistance.
Compact size for space-saving in circuit designs.
Suitable for driving high side MOSFETs in power electronics applications.
Designed to meet automotive industry standards for reliability in vehicles.
Low power consumption for energy efficiency.
Standard supply voltage for compatibility with many electronic systems.
Fast turn-on time for quick response in switching applications.
Provides flexible interface options for different circuit configurations.
Fast turn-off time ensures efficient switching performance.
MOSFET Gate Drivers NCP81075MNTXG attributes and parameters. Explore more MOSFET Gate Drivers devices from Onsemi
High Side Driver:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
NCP81075MNTXG Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Mult Dev Circuit Improv 23/Mar/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
Daco Semiconductor
LTC4440AHMS8E-5#PBF
Linear Technology
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE; High Side Driver: YES;
EL7457CUZ
Renesas Electronics
EL7457CUZ by Renesas Electronics is a MOSFET Gate Driver with 4 functions, operating b/w -40 to 85°C. It features a small outline package, Gull Wing terminals, and supports a supply voltage of ±5V. Ideal for industrial applications requiring high side drivers in compact designs.
LTC4372CDD#PBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
UCC27517DBVT
UCC27517DBVT by Texas Instruments is a MOSFET gate driver with 12V power supply, 4A output current, and 0.03us turn-on/off time. Ideal for automotive applications, it features BICMOS technology, dual terminal position, and small outline package style.
IR21531PBF
International Rectifier
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MIC4424YM
MIC4424YM by Microchip Technology is a MOSFET Gate Driver with 2 functions, operating voltage range of 4.5V to 18V, and turn-on/off time of 0.1 us. It is used in industrial applications requiring high-speed switching such as power supplies and motor control systems.
TC4427AEOA
Telcom Semiconductor
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LTC7001EMSE#WPBF
LTC7001EMSE#WPBF by Analog Devices is a MOSFET gate driver with a max supply voltage of 135V, suitable for automotive applications. It features a small outline package style, Schmitt trigger input characteristics, and dual terminal position. With turn-on/off times of 70us and operating temperature range from -40 to 125°C, it offers reliable performance in various high-side driver applications.
FAN3224TMX
Fairchild Semiconductor
FULL BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
UCC27511AQDBVRQ1
UCC27511AQDBVRQ1 by Texas Instruments is a MOSFET gate driver with a max supply voltage of 18V and built-in under voltage protection. It is designed for automotive applications, featuring a small outline package style and operating temperature range from -40 to 125°C. With an output current of 8A, it offers source and sink flow direction for IGBT/MOSFET drivers.
LTC4372CMS8#PBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
UCC27282DR
UCC27282DR by Texas Instruments is a MOSFET gate driver with 2 channels, 3.5A output current, and 16V max supply voltage. Ideal for automotive applications due to its small outline package and high side driver feature. Operates in temperatures from -40°C to 125°C, making it suitable for various environments.
ICL7667MJA/883B
Intersil
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LTC4440EMS8E#PBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
IR2110S
Infineon Technologies
IR2110S by Infineon Technologies is a MOSFET Gate Driver with a max supply voltage of 20V and high side driver feature. It has a turn-on time of 0.15us and turn-off time of 0.125us, making it ideal for automotive applications requiring fast switching speeds. With a small outline package style and dual terminal position, this CMOS technology driver is suitable for various surface mount designs in the automotive industry.
IR2114SSPBF
IR2114SSPBF by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 20V and built-in protections for transient, over current, and under voltage. It is designed for automotive applications, featuring a small outline package style and Schmitt trigger input characteristics. With push-pull output characteristics, it offers fast turn-on and turn-off times of 0.66 us.
NCV57000DWR2G
NCV57000DWR2G by Onsemi is a MOSFET gate driver with 16 terminals, suitable for automotive applications. It operates at temperatures ranging from -40 to 125°C and has a max supply voltage of 24V. With turn-on/off times of 0.09 us, it features an interface IC type of BUFFER OR INVERTER BASED IGBT DRIVER.
UCC21530DWKR
UCC21530DWKR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 6A. It operates in automotive-grade temperatures from -40 to 125°C and features built-in protections for transient and under voltage conditions. Ideal for applications requiring high side drivers, this driver has a turn-on time of 0.03µs and supports a nominal voltage of 3.3V.
IR2110-1PBF
IR2110-1PBF by International Rectifier is a MOSFET gate driver with a max supply voltage of 20V and high side driver feature. It operates in automotive-grade temperatures, with turn-on time of 0.15us and turn-off time of 0.125us. Ideal for half bridge based MOSFET driver applications due to its CMOS technology and nominal output peak current limit of 2.5A.
LTC7004HMSE#TRPBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE; Nominal Supply Voltage-1: 10 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP81074ADR2G
NCP81074ADR2G by Onsemi is a MOSFET gate driver with 10A output peak current limit, 20V max supply voltage, and 0.027us turn-on/off time. Ideal for automotive applications due to its small outline package style and wide operating temperature range from -40°C to 140°C.
NCP81075DR2G
NCP81075DR2G by Onsemi is a MOSFET gate driver with 8 terminals, suitable for automotive applications. It operates b/w -40 to 140°C, with a supply voltage range of 8.5-20V. The driver has a turn-on/off time of 0.05 us and consumes 1.8 mA max supply current at nominal 12V voltage.
NCP81071BDR2G
NCP81071BDR2G by Onsemi is a MOSFET gate driver with 2 functions, operating at 4.5-20V. It has a small outline package, suitable for automotive applications. With a temperature range of -40 to 140°C, it offers reliable performance in various environments.
NCP81074BDR2G
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCP81151MNTBG
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: SON; Package Shape: RECTANGULAR;
NCP81075MTTXG
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE;
NCP81074AMNTBG
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCP81151BMNTBG
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCP81253MNTBG
NCP81253MNTBG by Onsemi is a MOSFET Gate Driver with 8 terminals, operating voltage range of 4.5V to 5.5V, and output in 3-STATE mode. It has a small outline package style suitable for industrial applications requiring high side drivers with fast turn-on/off times of 0.04us/0.03us at temperatures ranging from -40°C to 100°C.
NCP81071BZR2G
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE;
NCP81080DR2G
NCP81080DR2G by Onsemi is a MOSFET gate driver with 8 terminals, operating temperature range of -40 to 140°C, and supply voltage from 5.5 to 20V. It is designed for automotive applications requiring high side drivers with small outline package style.
NCP81146MNTBG
MOSFET Drivers; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: SON; Package Shape: RECTANGULAR;
NCP81051MNTBG
MOSFET Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: SON; Package Shape: RECTANGULAR;
NCP81062MNTWG
NCP81062MNTWG by Onsemi is a MOSFET Gate Driver with 8 terminals, operating voltage range of 4.5V to 13.2V, and Schmitt Trigger input characteristics. It has a small outline package style suitable for high side driver applications in electronics requiring fast turn-on/off times of 0.03/0.035 us at temperatures ranging from -10 to 125 °C.
NCP81161MNTBG
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCP81080MNTBG
NCP81074BMNTBG
NCP81071BMNTXG
NCP81071ADR2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved