Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP81071ADR2G by Onsemi is a MOSFET Gate Driver with 2 functions, operating at 12V. It has a supply voltage range of 4.5V to 20V and can withstand temperatures from -40°C to 140°C. Ideal for automotive applications requiring high-performance gate driving capabilities in a compact package.
Median Price
$0.998
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.766
100+ parts
$0.557
1k+ parts
$0.513
10k+ parts
-
Rochester
$0.830
$0.810
$0.800
Arrow
$0.965
$0.645
Farnell
$1.030
$0.670
$0.466
Mouser Electronics
$1.250
$0.728
$0.634
$0.561
DigiKey
$0.643
Element14
$2.030
$1.330
$0.922
$0.788
Flip Electronics (Authorized)
Verical
Digiode
$0.528
Vyrian
$0.556
Flip Electronics
Chip Stock
Cyclops Electronics Ltd
Nova Conductors
Ampacity Inc.
$0.473
Corphita
$0.500
Corohmni
Vigor
$1.400
Microchip USA
$3.858
Perfect Parts
SupplyDigital Components
TANS Electronics
Kepictronics
Authorized Procurement Solutions
Kulean Microsystems
iodParts Technologies Inc.
$0.783
Problanco Electronics
Netroflash
S.R.D Solutions
UHIMA Technologies
This material provides durability and protection, making the product reliable for long-term use.
Surface mount design allows for easy installation and space-saving on a PCB.
Supports a wide range of supply voltages, providing flexibility in different applications.
Having multiple functions in one device simplifies circuit design and reduces component count.
Rectangular shape allows for efficient placement and routing on a PCB.
Nominal supply voltage of 12V is commonly used in many applications, ensuring compatibility.
Having enough terminals allows for easy connectivity and interfacing with other components.
Compact size of the package saves space on the PCB and reduces overall system size.
Supports a low minimum supply voltage, making it suitable for a variety of applications.
High maximum operating temperature ensures reliability and performance under harsh conditions.
Wide operating temperature range allows for use in extreme environments.
Matte tin finish provides good solderability and corrosion resistance.
Dual terminal position allows for flexibility in PCB layout and routing.
Low seated height enables compact designs and minimizes board space requirements.
Narrow width facilitates dense PCB layouts and enables efficient use of space.
Short reflow time helps prevent thermal damage to the component during assembly.
High peak reflow temperature ensures proper soldering and reliability in assembly processes.
Optimum length for a balanced form factor and efficient placement on a PCB.
Automotive-grade temperature rating ensures reliability in automotive applications.
Gull wing terminal form provides mechanical strength and secure solder joints.
Optimal nominal supply voltage for many applications, ensuring compatibility and performance.
Standard terminal pitch for easy PCB routing and assembly.
Buffer or inverter based interface IC type allows for versatility and compatibility with different control systems.
MOSFET Gate Drivers NCP81071ADR2G attributes and parameters. Explore more MOSFET Gate Drivers devices from Onsemi
High Side Driver:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCP81071ADR2G Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - NCP81071yy Assembly 21/Dec/2023
PCN Packaging - Mult MSL1 Pkg Rev 20/Dec/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
Taiwan Semiconductor
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
UCC27714D
UCC27714D by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 4A. It operates in automotive-grade temperatures from -40 to 125°C and has a turn-on/off time of 0.125us. This small outline package with gull wing terminals is suitable for high side driver applications requiring true output polarity control.
IR2104PBF
International Rectifier
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
UCC21225ANPLR
UCC21225ANPLR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling up to 6A output current. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 0.03µs, making it suitable for high-speed applications requiring precise control. The package style is grid array with very thin profile and fine pitch, ideal for space-constrained designs.
ADUM3221ARZ
Analog Devices
ADUM3221ARZ by Analog Devices is a MOSFET gate driver with 8 terminals and built-in protections. It operates b/w -40 to 125 °C, with a supply voltage range of 3-18 V. Ideal for automotive applications, it offers a max output current of 0.23 A and turn-on/off time of 0.072 us.
UCC27517ADBVR
UCC27517ADBVR by Texas Instruments is a MOSFET gate driver with 12V power supply, 4A output current limit, and automotive temperature grade. It features a small outline package with dual terminals for surface mount applications. Ideal for buffer or inverter-based MOSFET driving in automotive electronics.
MIC4604YMT-T5
Micrel
HALF BRIDGE BASED MOSFET DRIVER; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: SON; Package Shape: RECTANGULAR; Terminal Position: DUAL;
LTC4440EMS8E#PBF
Linear Technology
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
UCC23513QDWYRQ1
UCC23513QDWYRQ1 by Texas Instruments is a MOSFET gate driver with AEC-Q100 screening for automotive applications. It features a max supply voltage of 33V, output current of 4.5A, and turn-on/off time of 0.105us. This small outline package has dual terminals, push-pull output characteristics, and operates in temperatures ranging from -40 to 125°C.
IR2110PBF
Infineon Technologies
IR2110PBF by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 20V and high side driver feature. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various applications requiring precise turn-on/off times of 0.15us and 0.125us. With a nominal output peak current limit of 2.5A, this CMOS technology-based driver is ideal for half-bridge based MOSFET driving in automotive electronics.
FAN73611MX_OP
FAN73611MX_OP by Onsemi is a MOSFET gate driver with 8 terminals, suitable for automotive applications. It has a supply voltage range of 10-20V and operates b/w -40 to 125°C. With a turn-on/off time of 0.17us, it provides high side driving capability up to 0.5A peak output current limit.
TC4420EPA
Teledyne Components
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
FAN7362MX
FAN7362MX by Onsemi is a MOSFET gate driver with 8 terminals, suitable for automotive applications. It operates b/w -40 to 125°C and has a supply voltage range of 10-20V. With push-pull output, it offers fast turn-on/off times of 0.2/0.18 us for efficient performance.
LM5108DRCR
LM5108DRCR by Texas Instruments is a MOSFET gate driver with 2.6A output current, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage range of 5.5V to 16V. This small outline driver has dual terminals and supports high side driving.
LT1910IS8#TR
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LTC7004HMSE#TRPBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE; Nominal Supply Voltage-1: 10 V;
FAN3111ESX
FAN3111ESX by Onsemi is a MOSFET gate driver with 5 terminals, operating voltage range of 4.5V to 18V, and automotive temperature grade. It features a small outline package style for surface mount applications. Ideal for driving power MOSFETs in automotive electronics due to its high operating temperature and low profile design.
FAN7081M-GF085
FAN7081M-GF085 by Onsemi is an AEC-Q100 compliant MOSFET gate driver with a supply voltage of 15V. It operates in temperatures ranging from -40 to 125°C and features a small outline package style. Ideal for automotive applications, it offers dual terminals, matte tin finish, and gull wing terminal form.
LM5111-1MX/NOPB
LM5111-1MX/NOPB by Texas Instruments is a MOSFET gate driver with 2 channels, 5A output current, and 12V nominal voltage. It features overvoltage protection and operates in automotive-grade temperatures. Ideal for applications requiring fast turn-on/off times and source/sink current flow control.
MAX4427ESA+
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TC4468EOE
TC4468EOE by Microchip Technology is a MOSFET gate driver with 4 functions, operating at supply voltages of 4.5-18V. It features a totem-pole output and AND gate based interface IC type, suitable for industrial applications requiring high side drivers with quick turn-on/off times of 0.15 us.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP81074ADR2G
NCP81074ADR2G by Onsemi is a MOSFET gate driver with 10A output peak current limit, 20V max supply voltage, and 0.027us turn-on/off time. Ideal for automotive applications due to its small outline package style and wide operating temperature range from -40°C to 140°C.
NCP81075DR2G
NCP81075DR2G by Onsemi is a MOSFET gate driver with 8 terminals, suitable for automotive applications. It operates b/w -40 to 140°C, with a supply voltage range of 8.5-20V. The driver has a turn-on/off time of 0.05 us and consumes 1.8 mA max supply current at nominal 12V voltage.
NCP81071BDR2G
NCP81071BDR2G by Onsemi is a MOSFET gate driver with 2 functions, operating at 4.5-20V. It has a small outline package, suitable for automotive applications. With a temperature range of -40 to 140°C, it offers reliable performance in various environments.
NCP81074BDR2G
NCP81151MNTBG
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: SON; Package Shape: RECTANGULAR;
NCP81075MTTXG
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE;
NCP81075MNTXG
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCP81074AMNTBG
NCP81151BMNTBG
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCP81253MNTBG
NCP81253MNTBG by Onsemi is a MOSFET Gate Driver with 8 terminals, operating voltage range of 4.5V to 5.5V, and output in 3-STATE mode. It has a small outline package style suitable for industrial applications requiring high side drivers with fast turn-on/off times of 0.04us/0.03us at temperatures ranging from -40°C to 100°C.
NCP81071BZR2G
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE;
NCP81080DR2G
NCP81080DR2G by Onsemi is a MOSFET gate driver with 8 terminals, operating temperature range of -40 to 140°C, and supply voltage from 5.5 to 20V. It is designed for automotive applications requiring high side drivers with small outline package style.
NCP81146MNTBG
MOSFET Drivers; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: SON; Package Shape: RECTANGULAR;
NCP81051MNTBG
MOSFET Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: SON; Package Shape: RECTANGULAR;
NCP81062MNTWG
NCP81062MNTWG by Onsemi is a MOSFET Gate Driver with 8 terminals, operating voltage range of 4.5V to 13.2V, and Schmitt Trigger input characteristics. It has a small outline package style suitable for high side driver applications in electronics requiring fast turn-on/off times of 0.03/0.035 us at temperatures ranging from -10 to 125 °C.
NCP81161MNTBG
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCP81080MNTBG
NCP81074BMNTBG
NCP81071BMNTXG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved