Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
UCC21520DW by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 6A. It operates in automotive-grade temperatures from -40 to 125°C and features built-in protections for under voltage. This small outline package with gull wing terminals is suitable for applications requiring high side drivers in compact spaces.
Median Price
$4.350
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Texas Instruments
1+ parts
100+ parts
$3.546
1k+ parts
$2.364
10k+ parts
-
Mouser Electronics
$5.690
$3.240
Verical
$4.085
$3.135
$3.007
Nova Conductors
$3.017
Digiode
$4.132
Mobius Materials
$10.751
$8.601
Chip Stock
Vyrian
Speed Components Ltd
ComSIT Distribution GmbH
Continental Prestige Electronics
$2.934
$2.875
Argo Parts USA
Netroflash
$2.957
Ampacity Inc.
$3.470
Semicontronic
$3.383
$3.366
Corphita
$3.915
Modulus Dynamics
$7.496
Corohmni
$7.804
Parana Technologies
$9.185
$9.827
DigiPath Technology Company
$10.114
$9.305
ChromeModa Solutions
$10.320
$8.462
IDEA Electronic Components Group
$9.804
$9.288
Advanced Electronics
$12.170
$11.562
A-Z Elektronik GmbH
Futuretech Components
Lixinc
Infinite Electronics LLP (Excess)
Formix International (Excess)
Authorized Procurement Solutions
Robosynatics
$0.125
Lucentia Tech
Perfect Parts
The use of plastic/epoxy material in the package body makes this product durable and reliable.
The surface mount feature allows for easy and convenient installation of the gate driver.
With a maximum supply voltage of 18V, this gate driver can efficiently operate in a wide range of applications.
The rectangular package shape ensures easy integration and space-saving design for the gate driver.
The built-in under voltage protection enhances the safety and reliability of the gate driver.
With a maximum supply voltage of 25V, this gate driver can handle high voltage requirements in automotive applications.
The gate driver with 16 terminals offers versatile connectivity options for various circuit configurations.
The small outline package style provides a compact and space-efficient solution for gate driving applications.
The gate driver's minimum supply voltage of 9.2V ensures reliable operation even in low voltage conditions.
With a minimum supply voltage of 3V, this gate driver is energy-efficient and suitable for low power applications.
The gate driver's high maximum operating temperature of 125°C ensures reliable performance even in harsh environments.
With a minimum operating temperature of -40°C, this gate driver can withstand extreme cold conditions.
The nickel palladium gold terminal finish provides excellent conductivity and corrosion resistance for long-term reliability.
The gate driver's dual terminal position offers flexibility in connecting external components for customized circuit designs.
The gate driver's low maximum seated height of 2.65mm saves space and allows for compact system integration.
MOSFET Gate Drivers UCC21520DW attributes and parameters. Explore more MOSFET Gate Drivers devices from Texas Instruments
Built-in Protections:
High Side Driver:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Nominal Supply Voltage-1:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
UCC21520DW Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - UCC21520 10/Jan/2022
PCN Assembly/Origin - Assembly/Wafer Site 07/Jul/2023
PCN Packaging - Marking Standardization 18/May/2023
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
BSS123NH6327XTSA1
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
UCC23513QDWYRQ1
UCC23513QDWYRQ1 by Texas Instruments is a MOSFET gate driver with AEC-Q100 screening for automotive applications. It features a max supply voltage of 33V, output current of 4.5A, and turn-on/off time of 0.105us. This small outline package has dual terminals, push-pull output characteristics, and operates in temperatures ranging from -40 to 125°C.
NCP81075DR2G
Onsemi
NCP81075DR2G by Onsemi is a MOSFET gate driver with 8 terminals, suitable for automotive applications. It operates b/w -40 to 140°C, with a supply voltage range of 8.5-20V. The driver has a turn-on/off time of 0.05 us and consumes 1.8 mA max supply current at nominal 12V voltage.
UCC27324DGN
UCC27324DGN by Texas Instruments is a MOSFET gate driver with 2 functions, operating at supply voltages b/w 4.5V to 15V. It features a small outline package style and is suitable for automotive applications due to its wide temperature range of -40°C to 125°C. With a max output current of 4A and fast turn-on/off times of 0.04us/0.05us, it provides efficient control for power electronics systems.
MIC4427YM-TR
Microchip Technology
MIC4427YM-TR by Microchip: MOSFET Gate Driver with 18V max supply voltage, 1.5A output peak current limit, and 0.08us turn-on time. Ideal for industrial applications requiring high side drivers in a small outline package.
IR2127SPBF
IR2127SPBF by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 20V and high side driver capability. With a turn-on time of 0.25us and turn-off time of 0.2us, it is suitable for automotive applications requiring fast switching speeds in harsh environments. This small outline package features dual terminals and CMOS technology, making it ideal for compact designs where space is limited.
TC4468CPD
TC4468CPD by Microchip Technology is a MOSFET gate driver with 4 functions, operating at supply voltages from 4.5V to 18V. It features a totem-pole output and AND gate based interface IC type, suitable for commercial applications requiring high side drivers. With turn-on/off times of 0.15 us, it offers precise control in a compact IN-LINE package style.
IXDD609SITR
IXYS Corporation
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR;
LM5106SDX/NOPB
LM5106SDX/NOPB by Texas Instruments is a MOSFET gate driver with 2 channels and a max output current of 1.8A, suitable for automotive applications. It operates at temperatures ranging from -40 to 125°C and has a nominal voltage of 12V. The package style is small outline with heat sink/slug, making it ideal for surface mount applications.
IR21844SPBF
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
IR1168STRPBF
HALF BRIDGE BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Power Supplies (V): 15;
UCC27322DGNG4
UCC27322DGNG4 by Texas Instruments is a MOSFET gate driver with a max supply voltage of 15V and min of 4.5V, suitable for industrial applications. It features a turn-on/off time of 0.07us, output peak current limit of 9A, and operates in temperatures ranging from -40 to 105°C. Ideal for driving power MOSFETs in various electronic systems requiring precise control and high efficiency.
LTC4372CDD#PBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
TC4427AEOA
Telcom Semiconductor
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
UC3707N
Unitrode
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
HIP4081AIBZT
Renesas Electronics
HIP4081AIBZT by Renesas Electronics is a MOSFET Gate Driver with 20 terminals, operating temperature range of -40 to 85°C, and supply voltage from 9.5V to 15V. It is used in industrial applications for driving high-side MOSFETs efficiently with turn-on time of 0.09us and turn-off time of 0.07us.
AUIRS2301STR
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
UCC5390ECD
UCC5390ECD by Texas Instruments is a MOSFET gate driver with a max supply voltage of 33V and built-in transient and under voltage protections. It operates in automotive-grade temperatures, has a peak output current of 17A, and features a turn-on/off time of 0.1us, making it ideal for high-performance applications requiring fast switching speeds.
LTC7003HMSE#PBF
Linear Technology
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT1910ES8#TRPBF
Analog Devices' LT1910ES8#TRPBF is a MOSFET Gate Driver with 12-48V supply voltage range, 400us turn-on time, and 100us turn-off time. Ideal for industrial applications requiring high side drivers in compact SMD packages.
EL7457CUZ-T7
Intersil
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27211AQDDARQ1
UCC27211AQDDARQ1 by Texas Instruments is a MOSFET gate driver with 2 channels, 4A max output current, and 17V max supply voltage. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40°C to 140°C. This small outline driver features true output polarity and high side driver capability.
UCC21750DWR
UCC21750DWR by Texas Instruments is a MOSFET gate driver with 16 terminals, operating temperature range of -40 to 125°C. It has a max output current of 10A and is designed for automotive applications. This surface-mount driver features a small outline package style and nickel palladium gold terminal finish.
UCC27531DBVR
UCC27531DBVR by Texas Instruments is a MOSFET gate driver with a max supply voltage of 32V and output current of 5A. It features a small outline package, suitable for automotive applications. With fast turn-on/off times of 0.026us, it is ideal for half-bridge based IGBT/MOSFET driver interfaces.
UCC21750DW
UCC21750DW by Texas Instruments is a MOSFET gate driver with 10A output current, suitable for automotive applications. It operates b/w -40 to 125°C, has 16 terminals in a small outline package, and features a buffer or inverter-based interface IC type.
UCC21750QDWQ1
UCC21750QDWQ1 by Texas Instruments is a MOSFET gate driver with a max supply voltage of 33V and high side driver feature. It operates in automotive-grade temperatures (-40 to 125°C) and has a nominal output peak current limit of 10A. This rectangular package, suitable for surface mount, offers a small outline design with dual terminals ideal for buffer or inverter-based IGBT/MOSFET driver applications.
UCC21520DWR
UCC21520DWR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 6A. It operates in automotive-grade temperatures from -40 to 125°C and features built-in protections for under voltage. With a small outline package style and dual terminal position, it is suitable for high side driver applications requiring fast turn-on/off times of 0.03 us.
UCC21750QDWRQ1
UCC21750QDWRQ1 by Texas Instruments is a MOSFET gate driver with a max supply voltage of 33V, suitable for automotive applications. It features a high side driver, 10A max output current, and operates in temperatures ranging from -40 to 125°C. The package style is small outline with dual terminal position and nickel/palladium/gold finish.
UCC27531DBVT
UCC27531DBVT by Texas Instruments is a MOSFET gate driver with a max supply voltage of 32V and output current of 5A. It features a small outline package style, suitable for automotive applications requiring high side drivers with fast turn-on/off times. With an operating temperature range from -40 to 140°C, it is ideal for use in compact electronic systems.
UCC27517DBVR
UCC27517DBVR by Texas Instruments is a MOSFET gate driver with 5 terminals, 12V power supply, and 4A output current. It features a turn-on/off time of 0.03us and operates in automotive-grade temperatures. Ideal for applications requiring fast switching speeds and precise control of MOSFETs in compact designs.
UCC27211DR
UCC27211DR by Texas Instruments is a MOSFET gate driver with a max supply voltage of 17V and a power supply of 12V. It has a max output current of 4A and is commonly used in automotive applications.
UCC21222D
UCC21222D by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 6A. It operates in automotive-grade temperatures (-40 to 125°C) and has built-in protections for transient and under voltage events. With a small outline package style, it is suitable for high side driver applications in automotive electronics.
UCC27211DDAR
UCC27211DDAR by Texas Instruments is a MOSFET gate driver with 2 channels, 4A max output current, and 17V max supply voltage. Ideal for automotive applications, it features a small outline package, true output polarity, and fast turn-on/off times of 0.6us/0.4us.
UCC27324DR
UCC27424DR
UCC27282DRCR
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE;
UCC21530DWKR
UCC21530DWKR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 6A. It operates in automotive-grade temperatures from -40 to 125°C and features built-in protections for transient and under voltage conditions. Ideal for applications requiring high side drivers, this driver has a turn-on time of 0.03µs and supports a nominal voltage of 3.3V.
UCC21520ADWR
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
UCC27511DBVR
UCC27511DBVR by Texas Instruments is a MOSFET gate driver with 18V max supply voltage, 12V power supplies, and 8A max output current. It is ideal for automotive applications due to its BICMOS technology, 0.03us turn-on/off time, and small outline package style.
UCC27324DGNR
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved