Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP457FCT2G by Onsemi is a peripheral driver with 6 terminals, operating voltage range of 0.75-5.5V, and max output current of 2A. It features built-in transient protection and is ideal for industrial applications requiring buffer or inverter-based interface ICs with sink output current flow direction.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$13.810
Problanco Electronics
Microchip USA
Kulean Microsystems
TANS Electronics
SupplyDigital Components
Corphita
Vigor
UHIMA Technologies
Corohmni
The plastic/epoxy material provides durability and protection for the internal components of the peripheral driver, making it suitable for long-term use.
Being surface mountable allows for easy and efficient installation on circuit boards, saving space and reducing assembly time.
With a high maximum supply voltage of 5.5 V, this peripheral driver can handle a wide range of input voltages, making it versatile for various applications.
The transient protection ensures that the peripheral driver is shielded from sudden voltage spikes or fluctuations, enhancing the reliability and longevity of the device.
With a high maximum output current of 2 A, this peripheral driver is capable of powering demanding loads, making it suitable for high-performance applications.
Peripheral Drivers NCP457FCT2G attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
NCP457FCT2G Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Devices EOL 26/Jul/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
General Instrument
Fairchild Semiconductor
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
World Products
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Sensitron Semiconductor
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Won-top Electronics
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
DS2482X-100+T
Maxim Integrated
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 9; Package Code: VFBGA; Package Shape: RECTANGULAR;
XSN6507DGQR
Texas Instruments
XSN6507DGQR by Texas Instruments is a peripheral driver with a max supply voltage of 36V and nominal output peak current limit of 1.3A. It operates in temperatures ranging from -55°C to 125°C, making it suitable for various industrial applications requiring high-performance buffer or inverter-based interface ICs.
MIC5891YWM
Microchip Technology
MIC5891YWM by Microchip Tech is a 16-terminal peripheral driver with max supply voltage of 12V and min operating temp of -40°C. Ideal for industrial applications, it features BICMOS technology, open-emitter output characteristics, and built-in transient protection.
IR25600SPBF
Infineon Technologies
IR25600SPBF by Infineon is a CMOS half bridge peripheral driver with 8 terminals, operating at -40 to 125 °C. It has a supply voltage of 15V and is designed for automotive applications due to its moisture sensitivity level of 2.
ULN2804AN
ULN2804AN by Texas Instruments is a CMOS technology-based peripheral driver with 8 bits. It has a max output current of 0.35A and built-in transient protection. Ideal for applications requiring sink output current flow direction, with a supply voltage range from 6V to 15V.
BTS5210LAUMA1
BTS5210LAUMA1 by Infineon is a peripheral driver with 2 functions, operating at 5.5-40V. It offers built-in protections for transient, over current, and over voltage scenarios. This small outline device is ideal for applications requiring a nominal output peak current limit of 3.9A and turn-on/off times of 250/270µs.
MIC2076-1YM
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2003D
Integrated Power Semiconductors
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
TDE1798DP
STMicroelectronics
TDE1798DP by STMicroelectronics is a peripheral driver with 8 terminals and built-in protections for over current and thermal issues. It operates b/w -25 to 85 °C with a supply voltage range of 6-35 V, providing a max output current of 0.5 A. Ideal for applications requiring buffer or inverter based peripheral drivers with source flow direction.
BTS141TCBUMA1
BTS141TCBUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 40us. This small outline package driver is ideal for applications requiring sink output current flow direction.
BTN8962TAAUMA1
BTN8962TAAUMA1 by Infineon is a MOS technology peripheral driver with 7 terminals. It offers built-in protections against transient, over current, and over voltage. Ideal for applications requiring a half bridge based interface IC with true output polarity and source/sink current flow direction.
NCV8450ASTT3G
NCV8450ASTT3G by Onsemi is a peripheral driver with a max supply voltage of 45V, built-in protections for transient, over current, and over voltage. It has a turn-on time of 125us and turn-off time of 175us. This IC type buffer or inverter based driver is ideal for automotive applications requiring high reliability under harsh conditions.
ITS4200SSJDXUMA1
ITS4200SSJDXUMA1 by Infineon is a peripheral driver with 8 terminals, operating voltage range of 6-52V, and built-in protections for various faults. It is designed for automotive applications, featuring a small outline package style and sink output current flow direction. With a turn-on time of 180us and turn-off time of 200us, it provides efficient buffering or inverting functions in automotive systems.
IRS2113PBF
IRS2113PBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V and built-in transient and under voltage protections. It operates in automotive-grade temperatures, has a turn-on time of 0.16us, and is commonly used as a buffer or inverter-based peripheral driver in various applications.
VNH5019TR-E
VNH5019TR-E by STMicroelectronics is a full bridge peripheral driver with 30 terminals. It offers built-in protections for transient, over voltage, thermal, and under voltage. With a max supply voltage of 24V and nominal output peak current limit of 50A, it is ideal for applications requiring source and sink output current flow direction.
SN75451BDRE4
SN75451BDRE4 by Texas Instruments is a peripheral driver with 2 functions, operating at 5V. It has a max supply voltage of 5.25V and output current of 0.5A. Ideal for applications requiring AND gate based peripheral drivers in commercial temperature grades.
ITS711L1FUMA1
ITS711L1FUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. This small outline package IC is ideal for buffer or inverter based applications requiring source and sink output current flow control.
VNQ5050KTR-E
STMicroelectronics VNQ5050KTR-E is a 4-function peripheral driver with max supply voltage of 36V and output current of 2A. It features built-in protections for transient, over current, over voltage, thermal, and under voltage. Ideal for applications requiring SOURCE flow direction in small outline package style.
FAN7390MX
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2803AN
Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP45521IMNTWG-H
NCP45521IMNTWG-H by Onsemi is a peripheral driver with max supply voltage of 5.5V, built-in protections for transient, over current, thermal & under voltage. It operates in industrial temperature range from -40 to 85 °C and has a small outline package style suitable for buffer or inverter based applications.
NCP45520IMNTWG-H
NCP45520IMNTWG-H by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal, and under voltage. It has a small outline package style suitable for industrial applications requiring sink output current flow direction at temperatures ranging from -40°C to 85°C.
NCP45520IMNTWG-L
NCP45520IMNTWG-L by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal, and under voltage conditions. It has a small outline package style with very thin profile suitable for industrial applications requiring sink output current flow direction at temperatures ranging from -40°C to 85°C.
NCP45770IMN24TWG
NCP45770IMN24TWG by Onsemi is a 12-terminal peripheral driver with built-in protections for over current, thermal, and under voltage. It operates b/w -40 to 85°C, with a supply voltage range of 3-5.5V. Ideal for industrial applications requiring a compact square package with sink output current flow direction.
NCP45521IMNTWG-L
NCP45521IMNTWG-L by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal, and under voltage. It has a small outline package style suitable for industrial applications requiring sink output current flow direction at temperatures ranging from -40°C to 85°C.
NCP45650IMNTWG
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 3;
NCP456RFCCT2G
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 6; Package Code: VFBGA; Package Shape: RECTANGULAR;
NCP45730IMN24TWG
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCP45731IMN24TWG
NCP45760IMN24RTWG
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE;
NCP458RFCCT2G
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 8; Package Code: FBGA; Package Shape: RECTANGULAR;
NCP458RFCT2G
NCP459FCT2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved