Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi MTB50P03HDL is a P-CHANNEL FET with 30V DS Breakdown Voltage and 150A IDM. Ideal for SWITCHING applications, it features 0.025 ohm Drain-Source Resistance and operates in ENHANCEMENT MODE. Suitable for surface mount, this transistor has a max power dissipation of 1.75W in a small outline package style.
Median Price
$1.590
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$1.560
1k+ parts
$1.530
10k+ parts
-
Component Electronics Inc.
$2.310
$1.730
$1.500
Chip Stock
Vyrian
Digiode
Bristol Electronics
Flex Direct, LLC
LWI Electronics Inc
Connector Distribution Corp
Right Parts Inc.
Electronics Depot
DF Sales Co.
PC Components Company LLC
Advanced Electronics
$0.776
$0.706
$0.636
AZTECH Wire
$1.350
$1.300
$1.270
$1.250
Corohmni
Component Stockers USA
$99.990
Kepictronics
Kulean Microsystems
A-Z Elektronik GmbH
Authorized Procurement Solutions
SupplyDigital Components
TANS Electronics
Corphita
Assy Fe
UHIMA Technologies
Problanco Electronics
Perfect Parts
GreenTree Electronics
The plastic/epoxy package material provides durability and protection for the Power FET, making it suitable for a variety of applications.
P-channel FETs have lower on-state resistance and higher current-carrying capability compared to N-channel FETs, making them efficient for power switching applications.
The built-in diode simplifies circuit design and allows for reverse polarity protection, enhancing the reliability of the switching application.
Designed specifically for switching applications, this FET provides efficient and reliable performance in controlling power flow.
With a high maximum pulsed drain current, this FET can handle high-power surges and peak currents, making it suitable for demanding applications.
The high avalanche energy rating allows the FET to withstand voltage spikes and transient events, providing robust protection for the circuit.
The low power dissipation rating ensures efficient operation and minimal heat generation, enhancing the overall reliability of the FET.
With a high maximum operating temperature, this FET can operate reliably in elevated temperature environments, expanding its range of applications.
Power Field Effect Transistors (FET) MTB50P03HDL attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Additional Features:
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
MTB50P03HDL Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Weitronic Enterprise
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
Panjit International
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
IRFL9014PBF
Vishay Intertechnology
Vishay Intertechnology's IRFL9014PBF is a N-CHANNEL Power FET with 60V DS Breakdown Voltage and 14A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating from -55 to 150 °C, it has 0.5 ohm Drain-Source On Resistance and 3.1W Max Power Dissipation.
IRFR024NTRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Maximum Drain Current (ID): 17 A; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
FDD4141-F085
FDD4141-F085 by Onsemi is a P-CHANNEL Power FET with 40V DS Breakdown Voltage and 100A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.0123 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it has a max power dissipation of 69W and can withstand temperatures from -55 to 150 °C.
STP11NK50ZFP
STMicroelectronics
STP11NK50ZFP by STMicroelectronics is a N-CHANNEL FET with 500V DS Breakdown Voltage, 40A IDM, and 0.52 ohm RDS(on). Ideal for SWITCHING applications due to its 30W power dissipation, 190mJ EAS rating, and ENHANCEMENT MODE operation at up to 150°C.
IRLML9301TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Operating Mode: ENHANCEMENT MODE; Terminal Finish: Matte Tin (Sn);
SI7850DP-T1-E3
SI7850DP-T1-E3 by Vishay Intertechnology is an N-channel power field effect transistor (FET) with a min DS breakdown voltage of 60V. It is designed for switching applications and has a max pulsed drain current of 40A. This surface mount transistor operates in enhancement mode and has a max operating temperature of 150°C.
JANTX2N6796U
Infineon Technologies
JANTX2N6796U by Infineon Technologies is a power FET with N-channel configuration and built-in diode. It is used for switching applications, has a min DS breakdown voltage of 100V, and can handle a max pulsed drain current of 32A.
FDB33N25TM
FDB33N25TM by Onsemi is a N-CHANNEL Power FET with 250V DS Breakdown Voltage and 33A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 132A Pulsed Drain Current, and 0.094 ohm On Resistance. The transistor operates in ENHANCEMENT MODE with a max power dissipation of 235W in a small outline package style.
IRLML0040TRPBF
Infineon's IRLML0040TRPBF is a N-CHANNEL FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 15A IDM, 3.6A ID, and 0.056 ohm RDS(on). With a small outline package style and -55 to 150 °C operating range, it offers high performance in compact designs.
NTD5867NLT4G
NTD5867NLT4G by Onsemi is a Power FET with 60V DS Breakdown Voltage, 76A IDM, and 0.05 ohm RDS(ON). It is an N-CHANNEL MOSFET in a PLASTIC/EPOXY package ideal for power management applications requiring high current handling capabilities.
DMN6068SE-13
DMN6068SE-13 by Diodes Inc. is a N-channel FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode, 20.8A max pulsed drain current, and 0.068 ohm max drain-source resistance. Suitable for enhancement mode operation in small outline packages at up to 150°C operating temperature.
NDT456P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-30 Code: R-PDSO-G4; Maximum Drain Current (Abs) (ID): 7.5 A;
FQD3P50TM
FQD3P50TM by Onsemi is a P-CHANNEL Power FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. It features 8.4A Max Pulsed Drain Current, 250mJ Avalanche Energy Rating, and 4.9 ohm Max Drain-Source Resistance. This ENHANCEMENT MODE transistor operates at up to 150°C and has a compact SMALL OUTLINE package style for efficient power dissipation.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
DMP4051LK3-13
DMP4051LK3-13 by Diodes Inc. is a P-CHANNEL FET with 40V DS Breakdown Voltage, 28.9A IDM, and 0.051 ohm RDS(ON). Ideal for SWITCHING applications in small outline packages, operating at up to 150°C with single terminal position and built-in diode.
FDMC86102LZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; No. of Terminals: 5; Peak Reflow Temperature (C): 260;
IRF530PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 88 W; Case Connection: DRAIN; JESD-609 Code: e3;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
IRF540NSTRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 130 W; Avalanche Energy Rating (EAS): 185 mJ; JESD-609 Code: e3;
BSP149H6327XTSA1
Infineon Technologies' BSP149H6327XTSA1 is a N-CHANNEL Power FET with 200V DS breakdown voltage. It has a max drain current of 0.66A and operates in depletion mode. This transistor, with its small outline package style, is suitable for various applications requiring high power dissipation and temperature resistance up to 150°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MTB50P03HDLT4G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.75 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Time At Peak Reflow Temperature (s): 30;
MTB50P03HDLG
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.75 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; No. of Elements: 1;
MTB50N06V
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Terminal Position: SINGLE; Moisture Sensitivity Level (MSL): 1;
MTB50N06VL
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Peak Reflow Temperature (C): 235; Maximum Pulsed Drain Current (IDM): 147 A;
MTB50N06VLT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Moisture Sensitivity Level (MSL): 1; Package Shape: RECTANGULAR;
MTB50N06VT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Transistor Element Material: SILICON; No. of Elements: 1;
MTB50P03HDLT4
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.75 W; Transistor Element Material: SILICON; Avalanche Energy Rating (EAS): 1250 mJ;
MTB52N06V
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 165 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): 52 A;
MTB52N06VL
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 165 W; Maximum Drain-Source On Resistance: .025 ohm; Additional Features: AVALANCHE RATED, LOGIC LEVEL COMPATIBLE;
MTB52N06VLT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 165 W; Package Body Material: PLASTIC/EPOXY; Transistor Element Material: SILICON;
MTB52N06VLT4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; No. of Terminals: 2; Case Connection: DRAIN;
MTB52N06VT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 188 W; No. of Terminals: 2; Terminal Position: SINGLE;
MTB55N06Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 136 W; Transistor Element Material: SILICON; Terminal Finish: TIN LEAD;
MTB55N06ZT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 136 W; Maximum Drain Current (Abs) (ID): 55 A; Terminal Form: GULL WING;
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.75 W; Package Style (Meter): SMALL OUTLINE; Package Body Material: PLASTIC/EPOXY;
MTB50P03HDL
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.75 W; JESD-30 Code: R-PSSO-G2; JESD-609 Code: e0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved