Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC14053BFEL by Onsemi is a CMOS multiplexer with 3 functions, operating at -55 to 125 °C. It has a supply voltage range of 3-18 V and offers 50 dB isolation. Ideal for military-grade applications requiring fast switching with low on-state resistance.
Median Price
$0.172
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.143
10k+ parts
$0.127
DigiKey
$0.210
Verical
$0.159
Digiode
$0.134
Chip Stock
R&J Components
Vyrian
Cyclops Electronics Ltd
NAC Semi
ACDS - Activité Composants Distribution Service
Corphita
Corohmni
$0.141
AZTECH Wire
$19.130
Perfect Parts
Authorized Procurement Solutions
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
TANS Electronics
SupplyDigital Components
Continental Prestige Electronics
$0.123
Metaverse IC Inc.
A-Z Elektronik GmbH
Microchip USA
Cyclops Electronics Ltd (Excess)
Kepictronics
Glotronic Ltd.
UHIMA Technologies
Problanco Electronics
PLASTIC/EPOXY material ensures durability and protection for the internal components of the multiplexer, making it a reliable choice for long-term use.
With 3 functions, this multiplexer offers versatility and flexibility in routing signals and data, making it suitable for various applications.
Operating at a nominal supply voltage of 5V makes this multiplexer compatible with a wide range of systems and circuits, providing consistent performance.
With a maximum operating temperature of 125 °C, this multiplexer can function efficiently even in high-temperature environments, ensuring reliable operation.
Utilizing CMOS technology, this multiplexer offers low power consumption, high noise immunity, and fast switching speeds, making it a cost-effective and efficient choice.
Multiplexers & Switches MC14053BFEL attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Signal Current:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
MC14053BFEL Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 24/Jan/2011
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
Eic Semiconductor
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Bytesonic Electronics
74HCT4051DB,118
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC14066BDTR2G
MC14066BDTR2G by Onsemi is a CMOS SPST multiplexer with 4 functions, operating at -55 to 125 °C. It has a supply voltage range of 3-18 V and offers separate outputs with an on-state resistance of 1050 ohm. Ideal for military-grade applications requiring high isolation and fast switching times.
ADG411BRZ-REEL7
Analog Devices
ADG411BRZ-REEL7 by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and on-state resistance of 35 ohm. It operates in industrial temperature range (-40 to 85 °C) and has separate outputs. Ideal for applications requiring high isolation (68 dB) and fast switching times (175 ns).
74HC4852D,118
74HC4852D,118 by Nexperia is a CMOS differential multiplexer with 4 channels. It has a max on-state resistance of 330 ohm and operates at temperatures ranging from -40 to 125 °C. This small outline package is commonly used in automotive applications.
CD74HCT4067M
Harris Semiconductor
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HCT4051D,118
NXP Semiconductors' 74HCT4051D,118 is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 4.5V to 5.5V and offers a max on-state resistance of 180 ohm. With a compact design and automotive temperature grade, it is ideal for applications requiring fast switching times in harsh environments.
ADG1436YCPZ-REEL
ADG1436YCPZ-REEL by Analog Devices is a 2-function multiplexer with 16 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 4 ohm and switching voltage of +-5/+12/+-15 V. Ideal for automotive applications requiring fast switching and high isolation levels.
PCA9548ABSHP
NXP Semiconductors' PCA9548ABSHP is an 8-channel multiplexer with a supply voltage range of 2.3V to 5.5V, low on-state resistance of 55 ohm, and fast switch-on/off times of 0.3 ns. Ideal for applications requiring separate outputs in a compact square chip carrier package with surface mount capability.
ADG884BRMZ-REEL7
ADG884BRMZ-REEL7 by Analog Devices is a CMOS audio/video switch with 2 functions, 0.5 ohm max on-state resistance, and 60 dB nominal off-state isolation. It operates b/w -40 to 85 °C and has a supply voltage range of 1.8V to 5.5V. Ideal for industrial applications requiring fast switching times and high isolation levels.
PTMUX1574PWR
SPDT;
SN74LVC1G3157DCKR
SN74LVC1G3157DCKR by Texas Instruments is a SPDT switch with 6 terminals, operating at a voltage range of 1.65V to 5.5V. It offers a max on-state resistance of 30 ohm and a bandwidth of 340 kHz, suitable for industrial applications requiring fast switching times and high isolation levels. The package style is small outline with thin profile, making it ideal for space-constrained designs.
PCA9546APWR
PCA9546APWR by Texas Instruments is a 4-channel multiplexer with 2.3-5.5V supply voltage range, 45 ohm on-state resistance, and 1ns switch-on/off time. Ideal for applications requiring separate outputs in a compact SOT package with -40 to 85°C operating temperature range.
FSA3157P6X
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4052D
Philips Semiconductors
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TC4066BP
Toshiba
TC4066BP by Toshiba is a CMOS SPST switch with 4 functions, 14 terminals, and 5V nominal voltage. It operates in industrial temperature range (-40 to 85 °C) and has a max on-state resistance of 950 ohm. Ideal for applications requiring low power consumption and precise signal switching.
TS3USB221AQRSERQ1
TS3USB221AQRSERQ1 by Texas Instruments is a 2-channel differential multiplexer with 900 kHz bandwidth. It operates at -40 to 125 °C, with on-state resistance of 6 ohm and off-state isolation of 40 dB. Ideal for automotive applications due to AEC-Q100 screening level and very thin profile chip carrier package.
MAX4053ACPE
Maxim Integrated
MAX4053ACPE by Maxim Integrated is a 16-terminal SPDT multiplexer with 3 functions, operating at 5V. It features a max on-state resistance of 100 ohm and switching time of 175 ns. Ideal for applications requiring high-speed signal routing in commercial temperature environments.
ADG507AKPZ
ADG507AKPZ by Analog Devices is a CMOS differential multiplexer with 8 channels and a max on-state resistance of 450 ohm. It operates at an industrial temperature grade range from -40 to 85 °C, suitable for various switching applications requiring high isolation and low signal current. The chip carrier package style with matte tin finish and quad terminal position makes it ideal for surface mount designs in industrial settings.
CD74HCT4067MG4
CD74HCT4067MG4 by Texas Instruments is a 24-terminal CMOS multiplexer with a 5V supply voltage. It features a max on-state resistance of 270 ohm and operates in temperatures ranging from -55 to 125°C. Ideal for military-grade applications requiring high-speed signal switching with low power consumption.
CD74HC4052M96
Intersil
DIFFERENTIAL MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC14051BDR2G
MC14051BDR2G by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 3-18V and offers a max on-state resistance of 1050 ohm. This small outline IC, suitable for military applications, has a temperature range from -55 to 125°C and features break-before-make switching technology.
Rochester Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC14051BDG
MC14051BDG by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 18 V. With a nominal off-state isolation of 50 dB, it is ideal for applications requiring precise signal switching in military-grade environments.
MC14051BDTR2G
MC14051BDTR2G by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 18 V. With a nominal off-state isolation of 50 dB, it is ideal for military-grade applications requiring precise signal switching within a compact thin profile package.
MC14066BDR2G
MC14066BDR2G by Onsemi is a CMOS SPST multiplexer with 4 functions, operating at -55 to 125°C. It has a supply voltage range of 3-18V and offers separate outputs with an on-state resistance of 1050 ohm. Ideal for military-grade applications requiring high isolation and fast switching times.
MC14067BDWG
MC14067BDWG by Onsemi is a 24-terminal CMOS multiplexer with 16 channels. It operates at temperatures ranging from -55 to 125 °C and has a max supply voltage of 18 V. With a small outline package style, it is ideal for military-grade applications requiring high on-state resistance match and off-state isolation.
MC14066BDG
MC14066BDG by Onsemi is a CMOS SPST multiplexer with 4 functions, operating at -55 to 125 °C. It has a supply voltage range of 3-18 V and offers separate outputs with an on-state resistance of 1050 ohm. Ideal for military-grade applications requiring high isolation and fast switching times.
MC14052BDG
MC14052BDG by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 18 V. With a nominal off-state isolation of 50 dB, it is ideal for military-grade applications requiring precise signal switching within a compact small outline package.
MC14053BDG
MC14053BDG by Onsemi is a CMOS multiplexer with 3 functions, operating at -55 to 125 °C. It has a max supply voltage of 18 V and peak reflow temperature of 260 C. Ideal for military-grade applications requiring small outline packages and low on-state resistance.
MC14066BDTR2
SPST; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC14066BD
Motorola
SPST; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC14066BD by Onsemi is a 4-function multiplexer with 14 terminals, operating at supply voltages of 3-18V. It features a max on-state resistance of 1050 ohm and offers separate outputs. This CMOS technology IC is suitable for military-grade applications requiring high isolation and low resistance match.
MC14052BDR2G
MC14052BDR2G by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 18 V. With a nominal off-state isolation of 50 dB, it is suitable for military-grade applications requiring precise signal switching in compact designs.
MC14066BDTEL
MC14066BDT
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved