Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$0.145
Lifecycle Status
Suppliers In-Stock
86
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$0.138
1k+ parts
10k+ parts
-
Arrow
$0.553
$0.197
$0.113
DigiKey
$0.136
RS (Exports)
$0.343
$0.196
Verical
Digiode
Nova Conductors
$0.153
DF Sales Co.
$0.160
Maritex
$0.360
$0.191
$0.180
$0.163
TEDSS.com
$1.000
$0.260
Ace Electronics
Chip Stock
Bristol Electronics
Micros
$0.146
Component Sense
$0.080
$0.064
Partservice
Micros sp.j. W. Kędra i J. Lic
$0.157
Vyrian
LIBRA Elektronik GmbH
J2 Sourcing AB
Prism Electronics
Zilex Electronics Inc.
ComSIT Distribution GmbH
Classic Components Corporation
Lantek
Greenchips
SIE Connect GmbH - GreenChips
Martec Srl
PC Components Company LLC
VNN
Rebound Electronics
Pegasus Components GmbH
Anansix
Holdelec - ElecDif-Pro
Sinequanon
EMSNET
R&J Components
A2Z Electronics, Inc.
Quantum Digital Technology
Cyclops Electronics Ltd
Magnum Semiconductors LLP
A&K Electronics
Rotakorn
LittleDiode
ECAB
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Velocity Electronics
Semi Source
Bas Electronics GmbH & Co. KG
Sogenti Electronics
ZD Integrated Circuits Inc.
Goldney Electronics S.L.
Ack Elektronik San.Tic.Ltd.Sti
Component Electronics Inc.
MRC Electronics
Electronic Expediters
Inventory MP
North Shore Components
Q Components
Extreme Components
Resion
Odintec Ltd.
Connector Distribution Corp
Right Parts Inc.
Legend Electronics Inc.
Mentor Electronics Marketing, LLC
BCID Electronics Ltd.
Whistler Technology
Carlin Systems, Inc.
Dark Horse Electronics
Speed Components Ltd
Mil-Aero Solutions, Inc.
LWI Electronics Inc
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Elcom Components
Avant Electronics Limited
Sunrise Surplus Inc.
Ashlea Components Ltd
MISTER SPROCKETS
J & M Industries LLC
Fibra_Brandt Electronic GMBH
First Choice Components Inc.
Sensible Micro Corp
GES GmbH
Semicontronic
$0.096
$0.094
$0.093
Corphita
$0.130
Corohmni
$0.141
Advanced Electronics
Argo Parts USA
$0.148
Continental Prestige Electronics
$0.150
Netroflash
Ampacity Inc.
AZTECH Wire
$0.310
$0.300
$0.290
Aztec Data Supply Inc.
$2.240
Perfect Parts
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
Assy Fe
S.R.D Solutions
Kepictronics
Cyclops Electronics Ltd (Excess)
GreenTree Electronics
UNI Independent Distributors
Futuretech Components
Supply Digital
Legend Electronics Inc. (Excess)
Speed Components Ltd (Excess)
Glotronic Ltd.
Computer Components Inc. - USA
Eliminating Global Boundries, Inc
Multiplexers & Switches 74HC4051D attributes and parameters. Explore more Multiplexers & Switches devices from Philips Semiconductors
Other IC type:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Signal Current:
Sub-Category:
Surface Mount:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
74HC4051D Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-398-4717, 5962013984717
NIIN
013984717
In September 2006, Philips completed the sale of an 80.1% stake in Philips Semiconductors to a consortium of private equity investors consisting of KKR, Bain Capital, Silver Lake Partners, Apax Partners and AlpInvest Partners. The new company name NXP (from Next eXPerience) was announced on August 31, 2006, and the company was officially launched during the Internationale Funkausstellung (IFA) consumer electronics show in Berlin. The newly independent NXP was ranked as one of the world's top 10 semiconductor companies
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
North American Philips Discrete Products Div
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Dc Components
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
Changzhou Starsea Electronics
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
DG419DY-T
Maxim Integrated
DG419DY-T by Maxim Integrated is a SPDT multiplexer with 8 terminals, operating at -40 to 85°C. It features a max on-state resistance of 35 ohm and switching voltage of ±15V. Ideal for industrial applications requiring high isolation (68 dB) and fast switching times (250 ns).
7705201EX
Defense Logistics Agency
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DG408DY
Renesas Electronics
MAX4564EKA+T
MAX4564EKA+T by Analog Devices is a SPDT multiplexer with 8 terminals, operating at -40 to 85°C. It has a low on-state resistance of 60 ohm and fast switching times of 60 ns turn-on and 40 ns turn-off. Ideal for industrial applications requiring high isolation (77 dB) and precise signal routing in compact designs.
77052012A
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 20; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
74HC4067PW-Q100J
Nexperia
Nexperia 74HC4067PW-Q100J is a 16-channel multiplexer with AEC-Q100 screening for automotive applications. Features include 180 ohm max on-state resistance, 450 ns switch-on time, and -40 to 125°C operating temperature range. Ideal for compact designs requiring high-performance signal routing in harsh environments.
DG409DY-E3
Vishay Intertechnology's DG409DY-E3 is a CMOS differential multiplexer with 4 channels, 2 functions, and 16 terminals. It operates at industrial temperature grade (-40 to 85°C) with a supply voltage range of ±5V to ±15V. Ideal for applications requiring fast switching times (150 ns) and low on-state resistance (100 ohm).
DG419DY-T1-E3
Vishay Intertechnology's DG419DY-T1-E3 is a SPDT switch with 35 ohm Ron, 250 ns switch-on time, and -40 to 85 °C operating temp. Ideal for industrial applications requiring fast switching and low on-state resistance in compact designs. With a small outline package and dual terminals, it suits various multiplexing needs.
FSSD06BQX
FSSD06BQX by Onsemi is a 24-terminal differential multiplexer with a max on-state resistance of 6 ohm and nominal voltage of 1.8 V, suitable for industrial applications. It features a peak reflow temperature of 260°C, operates b/w -40 to 85°C, and offers off-state isolation of 60 dB.
FSA2257MUX
Fairchild Semiconductor
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ADG736BRMZ-REEL7
ADG736BRMZ-REEL7 by Analog Devices is a CMOS SPDT switch with 2 functions, 10 terminals, and 3V nominal voltage. Ideal for automotive applications due to its small outline package and wide operating temperature range of -40 to 125°C. Features low on-state resistance of 12 ohm and fast switching times of 20 ns turn-on and 10 ns turn-off.
CD74HC4067M
Thomson Consumer Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD74HCT4067MG4
CD74HCT4067MG4 by Texas Instruments is a 24-terminal CMOS multiplexer with a 5V supply voltage. It features a max on-state resistance of 270 ohm and operates in temperatures ranging from -55 to 125°C. Ideal for military-grade applications requiring high-speed signal switching with low power consumption.
ADG5434BRUZ-REEL7
ADG5434BRUZ-REEL7 by Analog Devices is a SPDT multiplexer with 4 functions, operating at -40 to 125 °C. It has a max on-state resistance of 15 ohm and switching voltage of +-9/+-22/9/40 V. Ideal for automotive applications due to its compact size, low power consumption, and high isolation levels.
74LVC1G3157GW-Q100,125
Nexperia's 74LVC1G3157GW-Q100,125 is an AEC-Q100 qualified single-ended multiplexer with 2 channels. It operates b/w -40 to 125 °C and has a max on-state resistance of 195 ohm. With a small outline package style, it is ideal for automotive applications requiring high-speed switching capabilities.
MPC506AU/1KG4
The Texas Instruments MPC506AU/1KG4 is a CMOS single-ended multiplexer with 16 channels. It operates at temperatures ranging from -40 to 85°C and has a max on-state resistance of 1500 ohm. This small outline package switch is ideal for industrial applications requiring high isolation and fast switching times.
MUX36S16IPW
MUX36S16IPW by Texas Instruments is a CMOS single-ended multiplexer with 28 terminals and a supply voltage range of ±5V to ±18V. It offers a max on-state resistance of 430 ohm, fast switching times of 151 ns on and 97 ns off, making it ideal for automotive applications requiring high-speed signal routing in compact spaces.
ADG438FBRZ
ADG438FBRZ by Analog Devices is a CMOS single-ended multiplexer with 8 channels, -15V to +15V power supplies, and 270 ohm max on-state resistance. It is ideal for automotive applications due to its small outline package, dual terminal position, and high off-state isolation of 93 dB.
SN74LV4052APWT
SN74LV4052APWT by Texas Instruments is a CMOS differential multiplexer with 2 channels, operating at industrial temperature grade. It has a max supply voltage of 5.5V and nominal bandwidth of 50kHz, making it suitable for applications requiring high-speed signal switching in compact designs. With a small outline package style and low on-state resistance, this device offers efficient performance in various electronic systems.
CD4051BM
Harris Semiconductor
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74HC4051D,653
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors
NXP Semiconductors' 74HC4051D,653 is an 8-channel CMOS multiplexer with a max supply voltage of 10V. It features a peak reflow temperature of 260°C and a nominal off-state isolation of 50dB. Ideal for automotive applications due to its small outline package and dual terminal position.
74HC4051PW,118
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors' 74HC4051PW,118 is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2-10V and offers a max on-state resistance of 180 ohm. With a compact design and automotive temperature grade, it is ideal for applications requiring precise signal switching in tight spaces.
74HC4067PW,118
NXP Semiconductors' 74HC4067PW,118 is a CMOS multiplexer with 16 channels and a max supply voltage of 10V. It features a peak reflow temperature of 260°C, on-state resistance of 130 ohm, and switching behavior as break-before-make. Ideal for automotive applications due to its wide operating temperature range (-40 to 125°C) and small outline package style (7.8mm x 4.4mm).
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4052D,653
DIFFERENTIAL MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors' 74HC4052D,653 is a CMOS differential multiplexer with 4 channels. It operates at -40 to 125°C and has a max on-state resistance of 195 ohm. With a small outline package style, it's ideal for automotive applications requiring fast switching times and low on-state resistance.
74HC4051D
Toshiba
NXP Semiconductors' 74HC4051D is an 8-channel CMOS multiplexer with a max on-state resistance of 180 ohm and switching type of BREAK-BEFORE-MAKE. It operates at temperatures ranging from -40 to 125 °C, making it suitable for automotive applications requiring high isolation (50 dB) and low signal current (0.025 A).
74HC4067DB,118
NXP Semiconductors' 74HC4067DB,118 is a CMOS multiplexer with 16 channels and a max supply voltage of 10V. It features a nominal off-state isolation of 50dB, on-state resistance match of 6 ohm, and peak reflow temperature of 260°C. Ideal for automotive applications due to its small outline package and dual terminal position.
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4066D,653
NXP Semiconductors' 74HC4066D,653 is a CMOS SPST switch with 4 functions, operating at -40 to 125°C. It has a max on-state resistance of 142 ohm and switching time of 30 ns. Ideal for automotive applications due to its small outline package and make-before-break switching feature.
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HCT4051D,118
74HC4051BQ,115
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors' 74HC4051BQ,115 is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2-10V and offers a max on-state resistance of 180 ohm. With a compact chip carrier package, it is ideal for automotive applications requiring fast switching times and low power consumption.
74HC4052D-T
Philips Semiconductors
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved