Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LA5744TP by Onsemi is a switching regulator with 2A output current, 360kHz switching frequency, and 5V nominal output voltage. It is ideal for applications requiring efficient power conversion in compact spaces. With a small outline package and buck switcher configuration, it operates b/w -30 °C to 125°C temperature range.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
Corphita
TANS Electronics
Corohmni
UHIMA Technologies
Perfect Parts
The use of plastic/epoxy material ensures durability and protection for the internal components of the switching regulator.
Being surface mountable makes it easy to integrate this regulator into compact electronic designs, saving space and enabling efficient PCB layout.
Rectangular shape allows for easy handling and installation in various applications.
Suitable for applications requiring a stable input voltage of 15 V, providing reliable power conversion.
Capable of delivering up to 2 A of output current, making it suitable for powering a wide range of devices.
Buck configuration ensures efficient step-down voltage conversion, making the regulator energy-efficient and effective in reducing heat dissipation.
Switching Regulators & Controllers LA5744TP attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Nominal Output Voltage:
Package Body Material:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LA5744TP Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Surge Components
C0603X104K5RACAUTO
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Infinex
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LTM4644IY#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 77; Package Code: BGA; Package Shape: RECTANGULAR; Surface Mount: YES;
PLMR38020FDDAR
Texas Instruments
The Texas Instruments PLMR38020FDDAR is a switching regulator with 8 terminals, operating b/w -40 to 150°C. It offers a max output voltage of 75V and current of 2A, suitable for applications requiring efficient power conversion at high frequencies up to 2200 kHz. Ideal for compact designs needing precise current-mode control in various electronic systems.
LMR54406FDBVR
LMR54406FDBVR by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125 °C. It has a max output voltage of 28 V and current of 0.6 A, suitable for applications requiring a compact design and efficient power management in various electronic devices.
LMR16030PDDAR
LMR16030PDDAR by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 50V max output voltage. Ideal for automotive applications due to its low profile design and wide operating temperature range from -40°C to 125°C. This compact device offers pulse width modulation control technique and operates at a max switching frequency of 2500 kHz.
PTN78020WAH
PTN78020WAH by Texas Instruments is a switching regulator with 7 terminals, offering a max output current of 6A and a max output voltage of 12.6V. Ideal for industrial applications, this hybrid technology device operates b/w -40°C to 85°C, making it suitable for various power management needs in different environments.
LM5008MM
LM5008MM by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It supports input voltages from 9.5V to 95V and outputs up to 7V at 0.61A. Ideal for automotive applications due to its compact size, high efficiency (up to 600kHz), and current-mode control technique.
UCC28C43DR
UCC28C43DR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 105°C, making it suitable for various power management applications requiring precise control and high efficiency. The small outline package with surface mount capability and dual terminal position offers flexibility in design and integration.
TPS82130SILR
TPS82130SILR by Texas Instruments is a voltage-mode switching regulator with 3A output current, operating b/w -40 to 125°C. It features a buck-boost switcher configuration, PWM control technique, and supports input voltages from 3V to 17V. Ideal for automotive applications due to its compact size and high efficiency at a max frequency of 2200kHz.
LM25011AQ1MYX/NOPB
LM25011AQ1MYX/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various automotive applications. With a compact square package style and surface-mount capability, it offers high efficiency with a max switching frequency of 2000 kHz.
EMC2305-1-AP-TR
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LM5007SD/NOPB
LM5007SD/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 73V and a max output current of 0.5A, making it ideal for automotive applications requiring efficient power management up to 800kHz switching frequency.
MCP16331T-E/CHVAO
Microchip Technology
MCP16331T-E/CHVAO by Microchip is a switching regulator with 6 terminals, operating temp. range of -40 to 125°C, and max output current of 0.8A. Ideal for automotive applications due to AEC-Q100 screening level and compact design with small outline package style. Supports buck switcher config., PWM control technique, and has a max switching frequency of 550kHz.
UCC28C45DR
UCC28C45DR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 105°C, making it suitable for various power management applications requiring precise control and efficiency. The package style is small outline with dual terminals, ideal for compact designs where space is limited.
UC2825DW
Unitrode
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM22675MR-ADJ/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Control Mode: VOLTAGE-MODE;
LMZ23603TZ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Peak Reflow Temperature (C): 245; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: SINGLE;
LM2576T-ADJ
Motorola
SWITCHING REGULATOR; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO; Switcher Config: BUCK;
PTN78000AAH
PTN78000AAH by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -40 to 85°C, and max output current of 1.5A. It is ideal for industrial applications requiring a buck-boost switcher configuration with input voltage ranging from 7V to 28.7V and output voltage from -15V to -3V.
TPS54060DGQR
TPS54060DGQR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 60V, suitable for automotive applications. It operates in current-mode control with pulse width modulation technique and has a compact square package style with small outline and thin profile, making it ideal for space-constrained designs. With a wide temperature range from -40 to 150°C, this regulator offers reliable performance in harsh environments.
LM51561HQPWPRQ1
LM51561HQPWPRQ1 by Texas Instruments is a switching controller with a 12V nominal input voltage and 300V max output voltage. Operating in automotive-grade temperatures, it features a current-mode control technique and pulse width modulation for buck-boost configuration. With AEC-Q100 screening, this IC is ideal for automotive applications requiring high efficiency and compact design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT1912EMSE#PBF
Analog Devices
LT1912EMSE#PBF by Analog Devices is a current-mode switching regulator with 4.2A output current and 240kHz max switching frequency. Ideal for buck applications, it operates b/w 3.6V to 36V input voltage range in temperatures from 0°C to 125°C.
LA5774-FA-E
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LA5724MC-BH
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA5744TP-TL-E
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 5; Surface Mount: YES; Maximum Operating Temperature: 125 Cel; Qualification: Not Qualified;
LA5757TP
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 4; Package Shape: RECTANGULAR; Surface Mount: YES; Nominal Output Voltage: 5 V;
LA5756
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): FLANGE MOUNT;
LA5744
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO; Switcher Config: BUCK;
LA5757TP-FA-E
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 4; Surface Mount: YES; Terminal Position: SINGLE; Package Body Material: PLASTIC/EPOXY;
LA5735MC
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA5744MP
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Width (mm): 8.8 mm;
LA5744MP-DL-E
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 5; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Maximum Switching Frequency: 360 kHz;
LA5735MC-AH
LA5744MP-E
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 5; Surface Mount: YES; Control Mode: VOLTAGE-MODE; Minimum Operating Temperature: -30 Cel;
LA5735M-TE-L-E
LA5756-MDB-E
LA5735M
LA5744-HK-E
LA5724MC
LA5724M-TE-L-E
LA5735MC-BH
Sanyo Semiconductor
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: 3.1 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved