Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LA5744-HK-E by Onsemi is a VOLTAGE-MODE switching regulator with 5 terminals, operating b/w -30 to 125 °C. It has a max frequency of 360 kHz and uses Tin/Bismuth finish. This RECTANGULAR package is ideal for various applications requiring efficient power control.
Median Price
$1.663
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.600
1k+ parts
$1.330
10k+ parts
$1.180
DigiKey
$2.000
Verical
$1.475
Digiode
$1.244
Vyrian
$1.310
DigiKey Marketplace
$1.360
Chip Stock
Cyclops Electronics Ltd
ACDS - Activité Composants Distribution Service
Bristol Electronics
Dan-Mar Components
Corphita
$1.179
Corohmni
Component Stockers USA
$1.280
$1.150
Continental Prestige Electronics
$1.570
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
SupplyDigital Components
Metaverse IC Inc.
Problanco Electronics
TANS Electronics
Authorized Procurement Solutions
UHIMA Technologies
Microchip USA
Plastic/Epoxy package body material makes the product lightweight and durable, ideal for portable applications.
Rectangular package shape allows for easy integration and placement on circuit boards.
5 terminals provide flexibility in connecting to other components in the circuit.
In-line package style saves space on the circuit board, making it suitable for compact designs.
High maximum operating temperature ensures reliable performance in various operating conditions.
Voltage-mode control offers precise regulation of output voltage, enhancing the stability of the circuit.
Low minimum operating temperature allows the product to function efficiently even in cold environments.
Tin/Bismuth terminal finish provides good conductivity and solderability for secure connections.
Zig-zag terminal position facilitates easy soldering and efficient use of space on the circuit board.
High maximum switching frequency enables fast response and efficient power conversion.
Through-hole terminal form allows for easy assembly and secure connections on the circuit board.
Narrow terminal pitch enables close placement of components on the circuit board, saving space.
Switching Regulators & Controllers LA5744-HK-E attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Control Mode:
JESD-30 Code:
JESD-609 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Sub-Category:
Surface Mount:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
LA5744-HK-E Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
BAV99+
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
4554
Jw Miller Magnetics
Other Semiconductors;
LM2672M-3.3/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ14201HTZ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Qualification: Not Qualified; Terminal Finish: MATTE TIN; Terminal Position: SINGLE;
LM5007MMX/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LMZM23600V3SILR
LMZM23600V3SILR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max switching frequency of 1090kHz. It operates in automotive temperature grades, making it suitable for various automotive applications requiring precise voltage regulation within the range of 1.2V to 15V. The device features pulse width modulation control technique and buck-boost switcher configuration, ideal for compact microelectronic assemblies with limited space constraints.
LM2675N-5.0/NOPB
LM2675N-5.0/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output voltage of 37V and can handle up to 1A output current. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
TPS560200DBVT
TPS560200DBVT by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -40 to 125°C, and output current up to 0.775A. Ideal for automotive applications due to its compact size (2.9mm x 1.6mm) and pulse width modulation control technique at a max frequency of 600kHz.
MCP16331T-E/CHVAO
MCP16331T-E/CHVAO by Microchip is a switching regulator with 6 terminals, operating temp. range of -40 to 125°C, and max output current of 0.8A. Ideal for automotive applications due to AEC-Q100 screening level and compact design with small outline package style. Supports buck switcher config., PWM control technique, and has a max switching frequency of 550kHz.
TPS63001DRCRG4
TPS63001DRCRG4 by Texas Instruments is a switching regulator with a max output current of 2A and max operating temp of 85°C. Ideal for industrial applications, it operates in buck-boost configuration with a control mode of current-mode PWM. With a small outline package style, it offers a min output voltage of 3.3V.
LMZ31530RLGT
LMZ31530RLGT by Texas Instruments is a 30A BUCK switching regulator with a voltage-mode control mode. It operates b/w -40 to 85°C, has a max output voltage of 3.6V, and a min input voltage of 3V. Ideal for industrial applications requiring high efficiency power conversion in compact spaces.
LMR50410YFQDBVRQ1
LMR50410YFQDBVRQ1 by Texas Instruments is a switching regulator with 1A output current, 28V max output voltage, and 2100kHz max switching frequency. Ideal for automotive applications due to AEC-Q100 screening level and -40°C to 150°C operating temperature range.
LMZ31710RVQT
LMZ31710RVQT by Texas Instruments is a current-mode switching regulator with a max output current of 10A and a max switching frequency of 1200kHz. It operates in industrial temperature grades, with a min input voltage of 2.95V and nominal output voltage of 1.8V. Ideal for applications requiring efficient power conversion in compact spaces.
LM2675M-ADJ
LMZ14203EXTTZX/NOPB
SWITCHING REGULATOR; Temperature Grade: MILITARY; No. of Terminals: 7; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMR54410DBVR
LMR54410DBVR by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It supports input voltages from 4-36V and outputs up to 1A at 28V. With a compact design and pulse frequency modulation control, it's ideal for applications requiring efficient power conversion in limited space.
LM5008ASDX/NOPB
LM5008ASDX/NOPB by Texas Instruments is a switching regulator with a max output voltage of 75V and max output current of 0.35A. Operating in temperatures from -40 to 125°C, it's ideal for automotive applications due to its small outline package and wide input voltage range of 6-95V. With a max switching frequency of 600kHz, this device is suitable for various power management needs.
TPS63000DRCR
TPS63000DRCR by Texas Instruments is a switching regulator with max output voltage of 5.5V, max output current of 2A, and max operating temp of 85°C. Ideal for industrial applications requiring efficient power conversion in a compact form factor.
LMZ22005TZE/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Terminal Pitch: 1.27 mm; Terminal Finish: MATTE TIN; Qualification: Not Qualified;
LMZ23603TZE/NOPB
LMZ23603TZE/NOPB by Texas Instruments is a switching regulator with 3A output current, 950kHz max switching frequency, and 6V max output voltage. Ideal for industrial applications requiring a compact design and efficient power management in temperature-sensitive environments.
LM5085MYE/NOPB
LM5085MYE/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 10A and a wide input voltage range from 4.5V to 75V. It operates in automotive-grade temperatures (-40°C to 125°C) and has a compact package style suitable for space-constrained applications. Ideal for buck converter configurations, this IC offers high efficiency with a max switching frequency of 1000kHz.
L5973AD
STMicroelectronics
L5973AD by STMicroelectronics is a voltage-mode switching regulator with 2.3A output current, suitable for buck configuration applications. It operates within a wide input voltage range of 4.4V to 36V and features pulse width modulation control technique. This small outline IC in gull wing terminal form is ideal for compact electronic devices requiring efficient power management.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LA5774-FA-E
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LA5724MC-BH
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA5744TP-TL-E
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 5; Surface Mount: YES; Maximum Operating Temperature: 125 Cel; Qualification: Not Qualified;
LA5757TP
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 4; Package Shape: RECTANGULAR; Surface Mount: YES; Nominal Output Voltage: 5 V;
LA5756
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): FLANGE MOUNT;
LA5744
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO; Switcher Config: BUCK;
LA5757TP-FA-E
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 4; Surface Mount: YES; Terminal Position: SINGLE; Package Body Material: PLASTIC/EPOXY;
LA5735MC
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA5744MP
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Width (mm): 8.8 mm;
LA5744MP-DL-E
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 5; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Maximum Switching Frequency: 360 kHz;
LA5735MC-AH
LA5744MP-E
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 5; Surface Mount: YES; Control Mode: VOLTAGE-MODE; Minimum Operating Temperature: -30 Cel;
LA5735M-TE-L-E
LA5756-MDB-E
LA5735M
LA5744TP
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 4; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: 2 A;
LA5724MC
LA5724M-TE-L-E
LA5735MC-BH
Sanyo Electric
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved