Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FSA3157P6X by Onsemi is a SPDT switch with 30 ohm Ron, 13 ns switch-on time, and 57 dB isolation. It operates at -40 to 85°C, suitable for industrial applications requiring common output switching at Vsup of 1.65-5.5V in compact SOT package.
Median Price
$0.158
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.261
100+ parts
$0.248
1k+ parts
10k+ parts
-
Arrow
$0.263
$0.180
$0.154
Rochester
$0.140
$0.116
$0.104
Verical
$0.130
Future Electronics
$0.088
$0.083
Element14
$0.243
$0.220
$0.211
Farnell
$0.176
$0.128
$0.115
RS (Exports)
$0.121
Greenchips
$0.096
$0.091
$0.087
$0.079
Digiode
Nova Conductors
Chip Stock
Vyrian
Sensible Micro Corp
ComSIT Distribution GmbH
ComSIT USA
Bristol Electronics
Sea View Technologies
Electronic Treasures
SIE Connect GmbH - GreenChips
Semi Source
Cyclops Electronics Ltd
SPM Sales
ACDS - Activité Composants Distribution Service
Prism Electronics
Speed Components Ltd
Connector Distribution Corp
Right Parts Inc.
Ampacity Inc.
$0.074
Corohmni
Continental Prestige Electronics
Corphita
$0.123
Semicontronic
$0.162
$0.157
Argo Parts USA
$0.205
Modulus Dynamics
$0.253
Advanced Electronics
Aztec Data Supply Inc.
$24.175
Perfect Parts
Formix International (Excess)
RC Electronics
$0.260
$0.240
$0.230
Futuretech Components
Kulean Microsystems
S.R.D Solutions
Authorized Procurement Solutions
Lixinc
Problanco Electronics
Infinite Electronics LLP (Excess)
Kepictronics
Microchip USA
TANS Electronics
Assy Fe
Supply Digital
UHIMA Technologies
SupplyDigital Components
Speed Components Ltd (Excess)
Netroflash
$0.207
$0.200
$0.196
iodParts Technologies Inc.
Provides durability and protection for the internal components of the product, making it suitable for various environments.
Optimal supply voltage ensures stable and efficient operation of the multiplexers & switches.
Can withstand high temperatures, making it reliable for industrial applications.
Tin finish provides good conductivity and corrosion resistance for reliable connections.
CMOS technology offers low power consumption, high noise immunity, and compatibility with a wide range of systems.
Multiplexers & Switches FSA3157P6X attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
FSA3157P6X Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MAX333ACPP
Maxim Integrated
MAX333ACPP by Maxim Integrated is a 4-function multiplexer with 20 terminals, operating at -40 to +85°C. It features a nominal voltage of ±15V, on-state resistance of 45Ω, and break-before-make switching. Ideal for applications requiring high-speed signal routing in industrial settings.
ADG1436YRUZ-REEL7
Analog Devices
ADG1436YRUZ-REEL7 by Analog Devices is a 16-terminal SPDT multiplexer with 2 functions. It operates at -40 to 125 °C and supports supply voltages of +-5/+12/+-15 V. Ideal for automotive applications, it offers low on-state resistance (4 ohm) and high off-state isolation (80 dB).
ADG452BRZ-REEL
ADG452BRZ-REEL by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and 5V nominal voltage. It operates in industrial temperature range (-40 to 85 °C) and offers low on-state resistance (12 ohm). Ideal for applications requiring precise signal switching in compact designs.
DG403DY-T1-E3
Vishay Intertechnology
Vishay Intertechnology's DG403DY-T1-E3 is a CMOS SPDT switch with 2 functions, 16 terminals, and max on-state resistance of 45 ohm. With a supply voltage range of ±15V and industrial temperature grade, it suits applications requiring fast switching times like signal routing in industrial electronics.
ADG1433YRUZ
ADG1433YRUZ by Analog Devices is a CMOS SPDT multiplexer with 16 terminals. It operates at a supply voltage of +-5V and has a max on-state resistance of 9 ohm. This automotive-grade device is suitable for applications requiring high-speed switching and low power consumption.
ADG719BRMZ-REEL7
ADG719BRMZ-REEL7 by Analog Devices is an 8-terminal SPDT switch with 3V nominal voltage, 12 ohm max on-state resistance, and 67dB off-state isolation. Ideal for automotive applications due to its CMOS technology, -40 to 125°C operating range, and small outline package style.
7705201EC
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ADG1411YRUZ-REEL7
ADG1411YRUZ-REEL7 by Analog Devices is a CMOS SPST switch with 4 functions, operating at -40 to 125°C. It has a max on-state resistance of 5.4 ohm and offers separate outputs. Ideal for automotive applications due to its small size, low power consumption, and high isolation of 80 dB.
PI5A3157CEX
PI5A3157CEX by Diodes Inc. is a CMOS single-ended multiplexer with 6 terminals, operating at temperatures from -40 to 85°C. It has a max on-state resistance of 24 ohm and a switch-on time of 13 ns, making it ideal for industrial applications requiring precise signal routing in compact spaces.
ADG201HSJNZ
Rochester Electronics
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD74HC4051M
Rca Solid State
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG408DY+
NCP45525IMNTWG-H
NCP45525IMNTWG-H by Onsemi is an 8-terminal SPST switch with a max on-state resistance of 0.0317 ohm. Operating b/w -40 to 85 °C, it has a supply voltage range of 3-5.5 V making it ideal for industrial applications requiring precise signal routing in compact spaces.
MC14051BDG
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4066BCN
Fairchild Semiconductor
SPST; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TS5A9411DCKR
TS5A9411DCKR by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a max on-state resistance of 28 ohm, switching time of 20 ns, and nominal bandwidth of 100 kHz. Ideal for industrial applications requiring low power consumption and high isolation levels.
74LVC1G66GW-Q100,1
NXP Semiconductors
NXP Semiconductors' 74LVC1G66GW-Q100,1 is an AEC-Q100 qualified SPST switch with 195 ohm Ron. Operating b/w -40 to 125 °C, it has a dual terminal position and CMOS technology. Ideal for automotive applications due to its small outline package and low power supply requirements of 1.8/5V.
MUX36S16IDWR
MUX36S16IDWR by Texas Instruments is a CMOS single-ended multiplexer with 28 terminals, operating at -40 to 125°C. It features a max on-state resistance of 430 ohm and nominal bandwidth of 500 kHz. Ideal for automotive applications requiring high isolation and low switch-on time.
74HC4051PW-Q100,11
NXP Semiconductors' 74HC4051PW-Q100,11 is an AEC-Q100 compliant CMOS multiplexer with 8 channels and a max on-state resistance of 270 ohm. It operates in automotive temperature range (-40 to 125 °C) with low supply current (0.32 mA). Ideal for applications requiring fast switching (345 ns) and high signal current capacity (0.025 A).
74HC4067PW,118
NXP Semiconductors' 74HC4067PW,118 is a CMOS multiplexer with 16 channels and a max supply voltage of 10V. It features a peak reflow temperature of 260°C, on-state resistance of 130 ohm, and switching behavior as break-before-make. Ideal for automotive applications due to its wide operating temperature range (-40 to 125°C) and small outline package style (7.8mm x 4.4mm).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSA3157P6X
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA3030UMX
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
FSA3200UMX
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: QCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA3041UMX
FSA3041UMX by Onsemi is a multiplexer & switch with 16 terminals and a chip carrier package style. It operates at temperatures ranging from -40 to 85 °C and has separate output voltage of 2.5/4.5V. This IC type is commonly used in audio/video switching applications.
FSA3357K8X
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA321UMX
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: QCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA321UMX by Onsemi is a 10-terminal audio/video switch with 1.8/4.3V power supplies, -40 to 85°C operating temperature range, and 11 ohm max on-state resistance. It is ideal for industrial applications requiring separate output switching in a compact chip carrier package with nickel palladium gold finish and break-before-make operation.
FSA3230UMX
FSA3230UMX by Onsemi is a 16-terminal audio/video switch with a max on-state resistance of 6.5 ohm and operating temperature range from -40 to 85 °C. It features separate output, break-before-make switching at peak reflow temperature of 260C, ideal for industrial applications requiring quad terminal position in a chip carrier package style.
FSA3051TMX
FSA3051TMX by Onsemi is a SPDT multiplexer with 6 terminals, operating voltage range of 1.6V to 5.5V, and on-state resistance of 25 ohm. It is designed for industrial applications requiring a compact (0.4mm height) and reliable switch solution with high isolation (20dB) and temperature tolerance (-40°C to 85°C).
FSA3157P6X_NL
FSA3031UMX
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
FSA3157L6X
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved