Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FSA3030UMX by Onsemi is a single-ended multiplexer with 12 terminals in a chip carrier package. It operates b/w -40 to 85°C, with power supplies of 2.5/4.5V and switching at break-before-make. Ideal for industrial applications requiring separate output control in a compact square package.
Median Price
$0.511
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.492
1k+ parts
$0.409
10k+ parts
$0.364
DigiKey
$0.620
Verical
$0.456
Digiode
$0.402
Nova Conductors
$0.408
DigiKey Marketplace
Vyrian
Chip Stock
ACDS - Activité Composants Distribution Service
Corphita
$0.381
Corohmni
$0.400
Continental Prestige Electronics
Argo Parts USA
$0.396
Netroflash
$0.387
$0.379
Ampacity Inc.
$0.780
Semicontronic
$0.760
$0.757
Aztec Data Supply Inc.
$19.211
Perfect Parts
Assy Fe
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
TANS Electronics
Kulean Microsystems
Futuretech Components
SupplyDigital Components
Authorized Procurement Solutions
A-Z Elektronik GmbH
Microchip USA
Alle Elektronik GmbH
Supply Digital
UHIMA Technologies
Kepictronics
Problanco Electronics
This material offers durability and reliability for the product, ensuring a long lifespan.
Allows for easy installation and space-saving on a circuit board.
Supports various power supplies, providing flexibility for different applications.
Offers multiple connection points for enhanced functionality.
Can withstand high temperatures, suitable for industrial environments.
Can operate in cold temperatures, making it versatile for different conditions.
Provides separate outputs, preventing interference and improving signal quality.
Allows for quick and efficient soldering during manufacturing.
Designed for industrial use, meeting the high demands of industrial applications.
Ensures a break in the circuit before making a new connection, preventing short circuits.
Multiplexers & Switches FSA3030UMX attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Sub-Category:
Surface Mount:
Switching (V):
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
FSA3030UMX Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ADG1606BRUZ
Analog Devices
ADG1606BRUZ by Analog Devices is a 16-channel CMOS multiplexer with a max on-state resistance of 7.5 ohm and switching voltage of 8 V. Ideal for automotive applications, it operates b/w -40 to 125 °C and has a compact rectangular package design suitable for surface mount assembly.
TC4066BP(F)
Toshiba
Toshiba's TC4066BP(F) is a CMOS SPST switch with 4 functions, 14 terminals, and max on-state resistance of 1200 ohm. It operates b/w -40 to 85°C, suitable for industrial applications requiring separate output at 5/15V power supplies. The through-hole package in rectangular shape makes it ideal for multiplexing tasks.
DG412DY
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
HD3SS3212IRKST
HD3SS3212IRKST by Texas Instruments is a 2-function differential multiplexer with a nominal voltage of 3.3V and max bandwidth of 8000 kHz. It features common output, break-before-make switching, and offers 19 dB off-state isolation. Ideal for industrial applications requiring fast switching times and low on-state resistance in a compact chip carrier package.
DG442DY+
Maxim Integrated
7705201EA
Defense Logistics Agency
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TS5A3159DBVT
TS5A3159DBVT by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 3.2 ohm and fast switching times of 95 ns on and 70 ns off. Ideal for industrial applications requiring high isolation (63 dB) and low power consumption (0.0001 mA).
ADG1206YRUZ
ADG1206YRUZ by Analog Devices is a CMOS single-ended multiplexer with 16 channels. It operates at a nominal voltage of 15V and has a max on-state resistance of 200 ohm. This automotive-grade switch is ideal for applications requiring high off-state isolation and fast switching times.
74HC4051N
Philips Semiconductors
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
74HC4052PW,112
Nexperia
DIFFERENTIAL MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74LVC1G66GW
SPST; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 1;
ADG704BRMZ-REEL
ADG704BRMZ-REEL by Analog Devices is a CMOS single-ended multiplexer with 4 channels. It operates at a supply voltage range of 1.8V to 5.5V and offers a max on-state resistance of 8 ohm. With fast switching times of 24ns turn-on and 16ns turn-off, it is ideal for industrial applications requiring precise signal routing in compact spaces.
TS3A5018RSVR
TS3A5018RSVR by Texas Instruments is a 4-channel SPDT switch with a max on-state resistance of 22 ohm and nominal bandwidth of 300 kHz. It operates at an industrial temperature grade range from -40 to 85 °C, making it suitable for high-performance applications requiring low resistance and wide bandwidth.
DG508ACJ
Siliconix
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD74HC4052PWR
CD74HC4052PWR by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at temperatures from -55 to 125 °C and has a bandwidth of 200 kHz. With a compact design, it features common output and break-before-make switching for various applications in military-grade environments.
ADG1634BCPZ-REEL7
ADG1634BCPZ-REEL7 by Analog Devices is a CMOS SPDT switch with 4 functions, 20 terminals, and 5V nominal voltage. It operates in automotive-grade temperature range (-40 to 125°C) and has a max on-state resistance of 5 ohm. Ideal for applications requiring high-speed switching and low on-state resistance.
DG419DY
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
HEF4051BTD
NXP Semiconductors
HEF4051BTD by NXP Semiconductors is an 8-channel single-ended multiplexer with a max on-state resistance of 175 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage range of 3-15 V. Ideal for applications requiring high-speed switching such as signal routing in electronic circuits.
74HC4066D,653
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD74HC4052PWRE4
CD74HC4052PWRE4 by Texas Instruments is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125 °C and has a max on-state resistance of 130 ohm. With a package style of small outline, thin profile, and shrink pitch, it is suitable for military-grade applications requiring precise signal switching.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSA3157P6X
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA3157P6X by Onsemi is a SPDT switch with 30 ohm Ron, 13 ns switch-on time, and 57 dB isolation. It operates at -40 to 85°C, suitable for industrial applications requiring common output switching at Vsup of 1.65-5.5V in compact SOT package.
FSA3030UMX
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
FSA3200UMX
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: QCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA3041UMX
FSA3041UMX by Onsemi is a multiplexer & switch with 16 terminals and a chip carrier package style. It operates at temperatures ranging from -40 to 85 °C and has separate output voltage of 2.5/4.5V. This IC type is commonly used in audio/video switching applications.
FSA3357K8X
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA321UMX
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: QCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA321UMX by Onsemi is a 10-terminal audio/video switch with 1.8/4.3V power supplies, -40 to 85°C operating temperature range, and 11 ohm max on-state resistance. It is ideal for industrial applications requiring separate output switching in a compact chip carrier package with nickel palladium gold finish and break-before-make operation.
FSA3230UMX
FSA3230UMX by Onsemi is a 16-terminal audio/video switch with a max on-state resistance of 6.5 ohm and operating temperature range from -40 to 85 °C. It features separate output, break-before-make switching at peak reflow temperature of 260C, ideal for industrial applications requiring quad terminal position in a chip carrier package style.
FSA3051TMX
FSA3051TMX by Onsemi is a SPDT multiplexer with 6 terminals, operating voltage range of 1.6V to 5.5V, and on-state resistance of 25 ohm. It is designed for industrial applications requiring a compact (0.4mm height) and reliable switch solution with high isolation (20dB) and temperature tolerance (-40°C to 85°C).
FSA3157P6X_NL
FSA3031UMX
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
FSA3157L6X
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA3357L8X
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved