Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FQD7N20LTM by Onsemi is a N-CHANNEL Power FET with 200V DS Breakdown Voltage and 22A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.78 ohm RDS(on), and operates in ENHANCEMENT MODE.
Median Price
$0.665
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.400
100+ parts
$0.582
1k+ parts
$0.454
10k+ parts
-
Mouser Electronics
$0.583
$0.449
$0.338
Chip1Stop
$2.610
Arrow
$0.364
Verical
$0.311
Farnell
$0.405
$0.288
$0.239
Element14
$0.739
$0.526
$0.408
Rochester
$0.397
$0.329
$0.293
Newark
$0.504
$0.442
Digiode
$0.294
Vyrian
$0.309
Forefront Electronics and Design
$1.230
TME
$1.270
$0.530
$0.381
$0.365
Chip Stock
Flip Electronics
Bristol Electronics
Corphita
$0.278
Corohmni
Component Stockers USA
$0.750
$0.490
$0.350
Perfect Parts
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
iodParts Technologies Inc.
SupplyDigital Components
Problanco Electronics
TANS Electronics
Kepictronics
Northwest PG Solutions
$4.578
Supply Digital
Kulean Microsystems
Native Components
$4.531
UHIMA Technologies
GreenTree Electronics
Authorized Procurement Solutions
Provides durability and resistance to external elements.
Allows for efficient switching of electrical signals.
Simplifies circuit design and increases functionality.
Specifically designed for switching applications, ensuring optimal performance.
Facilitates easy installation on circuit boards.
Provides a high level of protection against voltage spikes.
Allows for efficient placement on circuit boards.
Enables secure connections for reliable operation.
Ensures low power consumption when not in use.
Capable of handling high peak currents for superior performance.
Can withstand high energy spikes without damage.
Sufficient current handling capability for various applications.
Simplifies installation and connection in circuits.
Ability to dissipate heat efficiently for long-term reliability.
Compact design for space-efficient circuit layouts.
Known for high efficiency and fast switching speeds.
Can operate reliably even in high-temperature environments.
Provides stability and reliability in electrical circuits.
Ensures good conductivity and corrosion resistance.
Low resistance for efficient power transfer.
Simplified connection for ease of use.
Facilitates effective heat dissipation.
Suitable for reflow soldering processes.
Can withstand high-temperature soldering processes without damage.
Power Field Effect Transistors (FET) FQD7N20LTM attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FQD7N20LTM Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
261
Deltrol Controls
Other Relays;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
International Devices
BSS138BK,215
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ATP304-TL-H
Onsemi
The Onsemi ATP304-TL-H is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 400A IDM. Ideal for applications requiring high power dissipation, it features a built-in diode, 0.0089 ohm RDS(on), and operates in enhancement mode. Suitable for surface mount designs with GULL WING terminals, this FET offers 656mJ EAS for robust performance in various electronic systems.
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
BSC22DN20NS3GATMA1
Infineon Technologies
Infineon's BSC22DN20NS3GATMA1 is a N-CHANNEL FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring 28A IDM and 0.225 ohm RDS(on), it operates in ENHANCEMENT MODE at up to 150°C. This PLASTIC/EPOXY transistor has DUAL terminals and a built-in DIODE, making it suitable for high-power circuit designs.
IRLML6402PBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Maximum Drain Current (Abs) (ID): 3.7 A; JESD-30 Code: R-PDSO-G3;
IRF7410TRPBF
Infineon's IRF7410TRPBF is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 65A IDM, 0.007 ohm RDS(on), and operates in ENHANCEMENT MODE. With GULL WING terminals and SMALL OUTLINE package, it can withstand -55 to 150 °C temperatures.
IRF740SPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Maximum Pulsed Drain Current (IDM): 40 A; Minimum DS Breakdown Voltage: 400 V;
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
IRFZ44NS
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 110 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
FDS4559_NL
Fairchild Semiconductor
FDS4559_NL by Fairchild Semiconductor is a Power FET with N/P-Channel, 2 elements w/ diode. Ideal for switching applications, it has max drain current of 4.5A, on-resistance of 0.055 ohm, and operates at up to 175°C. Package: PLASTIC/EPOXY, GULL WING terminals in SMALL OUTLINE style.
BSC011N03LSIATMA1
Infineon's BSC011N03LSIATMA1 is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 400A IDM, 0.0015 ohm RDS(on), and 100mJ EAS rating. Its small outline package and DUAL terminal position make it suitable for various power management systems.
IPB010N06NATMA1
Infineon's IPB010N06NATMA1 is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. Features include 720A pulsed drain current, 1600mJ avalanche energy rating, and 0.001 ohm max on-resistance. With a max power dissipation of 300W and operating temp up to 175°C, it's suitable for high-power circuits in various industries.
NCV8406ASTT3G
NCV8406ASTT3G by Onsemi is an N-CHANNEL FET for SWITCHING applications. It features a 60V DS Breakdown Voltage, 0.24 ohm Drain-Source On Resistance, and 1.81W Power Dissipation. Ideal for use in automotive electronics due to AEC-Q101 standard compliance.
IRLML6344TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
IRFS4410ZTRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 230 W; Terminal Form: GULL WING; Transistor Application: SWITCHING;
IRF7303TRPBF
IRF7303TRPBF by Infineon is a N-CHANNEL FET with 2 elements and built-in diode, ideal for SWITCHING applications. It has a Max Drain Current of 4.9A, Min DS Breakdown Voltage of 30V, and Max Pulsed Drain Current of 20A. This small outline package with GULL WING terminals operates in ENHANCEMENT MODE for efficient power management.
BSP89H6327XTSA1
Infineon's BSP89H6327XTSA1 is a N-CHANNEL Power FET with 240V DS Breakdown Voltage. It features 1.4A IDM, 0.35A ID, and 6ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance and small outline package style.
FQA36P15
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 294 W; Minimum DS Breakdown Voltage: 150 V; Qualification: Not Qualified;
DMG2301L-7
Diodes Incorporated
DMG2301L-7 by Diodes Inc. is a P-channel FET with 20V DS breakdown voltage and 10A IDM for switching applications. It operates in enhancement mode, has a max power dissipation of 1.5W, and features a 0.12 ohm drain-source resistance. Ideal for small outline packages with dual terminals, it can withstand temperatures from -55 to 150°C.
MSC035SMA170B
Microchip Technology
Power Field-Effect Transistors;
IRFP4568PBF
Infineon's IRFP4568PBF is a N-CHANNEL Power FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring 684A IDM and 0.0059 ohm RDS(on), it operates in ENHANCEMENT MODE up to 175°C. The PLASTIC/EPOXY package with THROUGH-HOLE terminals ensures reliable performance in high-power circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FQD7P20TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 55 W; Peak Reflow Temperature (C): 260; Transistor Application: SWITCHING;
FQD7P20TM by Onsemi is a P-CHANNEL Power FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 22.8A and EAS of 570mJ, operating in ENHANCEMENT MODE at up to 150°C.
FQD7N10LTM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 25 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 25 W; Transistor Application: SWITCHING; Maximum Operating Temperature: 150 Cel;
FQD7P06TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 28 W; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
FQD7P06TM by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 5.4A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 21.6A IDM, and 0.451 ohm RDS(on). Suitable for surface mount with GULL WING terminals, it operates in ENHANCEMENT MODE up to 150°C.
FQD7P20
FQD7P20 by Fairchild Semiconductor is a P-CHANNEL Power FET for switching applications. It features a 200V DS Breakdown Voltage, 22.8A Max IDM, and 0.69 ohm RDS(ON). With a small outline package style and Gull Wing terminals, it operates in enhancement mode with an operating temperature of up to 150°C.
FQD7P20TF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 55 W; Maximum Operating Temperature: 150 Cel; Package Shape: RECTANGULAR;
FQD7N20
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; JESD-30 Code: R-PSSO-G2; Maximum Drain-Source On Resistance: .69 ohm;
FQD7N30TM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 50 W; Maximum Pulsed Drain Current (IDM): 22 A; JESD-30 Code: R-PSSO-G2;
FQD7P06
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 28 W; Maximum Pulsed Drain Current (IDM): 21.6 A; Maximum Drain-Source On Resistance: .451 ohm;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): 5.3 A;
FQD7N20L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; No. of Terminals: 2; JEDEC-95 Code: TO-252;
FQD7N10LTF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 25 W; Operating Mode: ENHANCEMENT MODE; JESD-30 Code: R-PSSO-G2;
FQD7N10TF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 25 W; Package Style (Meter): SMALL OUTLINE; Package Body Material: PLASTIC/EPOXY;
FQD7N20LTF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
FQD7N20LTM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1;
FQD7N20TF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Package Body Material: PLASTIC/EPOXY; Transistor Application: SWITCHING;
FQD7N20TM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Terminal Finish: MATTE TIN; No. of Elements: 1;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 50 W; JESD-30 Code: R-PSSO-G2; Terminal Form: GULL WING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved