Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Seated Height: 6 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Native Components
$6.030
TANS Electronics
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
Northwest PG Solutions
$5.909
Corphita
UHIMA Technologies
Corohmni
Motion Control ICs FNF51560TD3 attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Terminal Form:
Terminal Position:
Width (mm):
FNF51560TD3 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Secos
Semiconductor Technology
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
Yangzhou Yangjie Electronics
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
BAT54C-7-F
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
TB6612FNG
Toshiba
TB6612FNG by Toshiba is a Motion Control IC with 2 functions, operating at 3-5V. Ideal for BRUSH DC MOTOR CONTROL, it offers a max output current of 3.2A and operates b/w -20 to 85°C.
BD62220AEFV-E2
ROHM
ROHM's BD62220AEFV-E2 is a small outline motion control IC with 28 terminals, operating voltage range of 8-28 V, and max output current of 2.8 A. Ideal for brush DC motor control applications, it offers a temp range of -25 to 85 °C and compact dimensions (9.7mm x 4.4mm x 1mm).
DRV8243HQDGQRQ1
DRV8243HQDGQRQ1 by Texas Instruments is a Motion Control IC with 28 terminals, operating voltage range of 4.5V to 35V, and max output current of 12A. It is ideal for BRUSH DC MOTOR CONTROL applications, featuring AEC-Q100 screening level and BICMOS technology for automotive use at temperatures ranging from -40°C to 125°C.
L6472HTR
STMicroelectronics
L6472HTR by STMicroelectronics is a Motion Control IC with 28 terminals, operating at 8-36V. It features a max output current of 7A and technology NMOS for stepper motor control applications. The package style is small outline, heat sink/slug, thin profile, shrink pitch, making it suitable for compact designs.
IM231L6S1BALMA1
Infineon Technologies
AC MOTOR CONTROLLER; Moisture Sensitivity Level (MSL): 3;
A4983SETTR-T
Allegro MicroSystems
Allegro MicroSystems' A4983SETTR-T is a Motion Control IC with 35V supply voltage, 2.5A output current, and NMOS technology. Ideal for stepper motor control applications, this surface-mount chip carrier operates b/w -20°C to 85°C with a terminal pitch of 0.5mm.
MC3479PG
MC3479PG by Onsemi is a Motion Control IC with 16 terminals, operating at 12V. It features a max output current of 0.5A and operates in a temperature range of 0-70°C. Ideal for stepper motor control applications due to its bipolar technology and through-hole terminal form.
MAX22205ATU+T
Maxim Integrated
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: LCC38,.2X.27,20;
MTD6508-ADJE/JQ
Microchip Technology
Microchip's MTD6508-ADJE/JQ is a Motion Control IC with 16 terminals, operating b/w -40 to 125 °C. It supports a supply voltage range of 2-5.5 V and offers a max output current of 1 A. Ideal for automotive applications, this CMOS technology chip comes in a square package with matte tin finish and very thin profile.
DRV8308RHAT
Texas Instruments' DRV8308RHAT is a Motion Control IC with 40 terminals in a square package. It operates b/w -40 to 85°C, suitable for industrial applications. With a supply voltage range of 8.5-32V and output current up to 0.13A, it serves as a Brushless DC Motor Controller in various electronic systems.
LM629M-6
Texas Instruments' LM629M-6 is a Motion Control IC with 24 terminals, operating at 5V. Ideal for BRUSH DC MOTOR CONTROL applications, it has a temperature range of -40 to 85°C and supports surface mount installation.
TLE62086GXUMA2
TLE62086GXUMA2 by Infineon is a Motion Control IC with 28 terminals, operating at 5V. It is a Brush DC Motor Controller with a max output current of 2A. This small outline package IC is ideal for motion control applications requiring precise voltage regulation and high current output.
A4963GLPTR-T
Allegro MicroSystems' A4963GLPTR-T is a Motion Control IC with 20 terminals, operating voltage range of 4.2V to 28V, and temp range from -25°C to 150°C. Ideal for Brushless DC Motor control applications due to its compact rectangular package design and surface-mount capability.
DRV8801PWP
DRV8801PWP by Texas Instruments is a Motion Control IC with 32V nominal voltage, 2.8A max output current, and -40 to 85°C operating temperature range. Ideal for brush DC motor control applications, this IC comes in a small outline package with dual terminals and gull wing form.
L6205N
STMicroelectronics L6205N is a Motion Control IC with 48V supply, 5.6A output current, and BCDMOS technology. Ideal for automotive applications, it features a rectangular package style with 20 terminals in an in-line configuration. Operating from -40 to 150°C, this stepper motor controller suits various motion control needs.
L6472PD
L6472PD by STMicroelectronics is a Motion Control IC with 36V nominal voltage, 7A max output current, and 3.6mm seated height. Ideal for stepper motor control applications due to its small outline package and dual terminal position. Suitable for surface mount designs with a rectangular shape and matte tin finish terminals.
IRAMS06UP60B-2
Infineon's IRAMS06UP60B-2 is a Motion Control IC with 15V nominal voltage, 9A max output current, and 20V max supply voltage. It's an AC motor controller in rectangular package style for various motion control applications.
DRV8839DSSR
DRV8839DSSR by Texas Instruments is a Motion Control IC with 12 terminals and a supply voltage range of 3-5V. It features a max output current of 1.8A, suitable for brush DC motor control applications. With a small outline package and industrial temperature grade, it offers efficient performance in compact designs.
A4935KJPTR-T
Allegro MicroSystems' A4935KJPTR-T is a Motion Control IC with 48 terminals, operating b/w -40 to 150°C. Suitable for automotive applications, it supports brushless DC motor control at supply voltages ranging from 5.5V to 50V. The package style includes flatpack, heat sink/slug, and low profile features in a square shape measuring 7mm x 7mm.
FSB50450US
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Length: 29 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FNF50560TD
AC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Supply Voltage (Vsup): 14 V;
FNF50560TD1
AC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Supply Current (Isup): 2.5 mA;
FNF50560TD2
FNF50560TD3
AC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO; Package Body Material: UNSPECIFIED;
FNF51060TD
AC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XDMA-T20;
FNF51060TD1
FNF51060TD2
AC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO; Package Equivalence Code: MODULE,20LEAD,1.0;
FNF51060TD3
AC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 15 V;
FNF51560TD
FNF51560TD1
AC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: DUAL;
FNF51560TD2
AC MOTOR CONTROLLER; No. of Terminals: 20; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: DUAL; Minimum Supply Voltage (Vsup): 14 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved