Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ALP242CGX by Onsemi is a 557x234 pixel display with dimensions of 43x38x3 mm. It operates b/w -10 °C to 60°C, powered by 8.5V. Ideal for compact devices requiring high-resolution displays in various applications.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
SupplyDigital Components
Kulean Microsystems
TANS Electronics
Problanco Electronics
Northwest PG Solutions
Corphita
UHIMA Technologies
Native Components
Corohmni
Provides high resolution for clear and detailed images on the display.
Slim design, making it space-saving and easy to integrate into various setups.
Allows the display to function in a wide range of temperature environments without overheating.
Compact size that can fit into limited space configurations.
Ensures the display can still operate efficiently in colder temperatures.
Offers a decent viewing area for users to see content clearly on the display.
Efficient power consumption at a stable voltage, ensuring consistent performance.
Compact and portable design for easy transportation and installation.
Allows for a comfortable viewing experience with ample height for content display.
Combined with the high horizontal pixel count, it provides a sharp and detailed image quality.
Displays & Monitors ALP242CGX attributes and parameters. Explore more Displays & Monitors devices from Onsemi
Horizontal Pixel Count:
Maximum Operating Temperature:
Minimum Operating Temperature:
Depth:
Height:
Length:
Sub-Category:
Nominal Supply Voltage:
Pixel Count (Vertical):
Viewing Area Height:
Viewing Area Length:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
NL128102BC23-03
Renesas Electronics
Displays; Horizontal Pixel Count: 1280 Pixel; Maximum Operating Temperature: 50 Cel; Height: 269 mm; Viewing Area Length: 305 mm; Depth: 17.9 mm;
AL0403
AL0403 by Onsemi is a 480x236 pixel display with dimensions of 119x102x5 mm. It operates b/w 5-40 °C, making it suitable for various applications like portable monitors and digital signage due to its compact size and high resolution.
AL1004
AL1004 by Onsemi is a 640x480 pixel display monitor with dimensions of 265x200x15 mm. It operates b/w 0-40 °C, making it suitable for various applications such as industrial control panels and digital signage due to its high resolution and compact design.
LCM5664-32A
LCM5664-32A by Onsemi is a 240x64 pixel display with dimensions of 180x75x12 mm. It operates b/w 0-40 °C, with a supply voltage of 5V. Ideal for applications requiring compact and high-resolution displays in various electronic devices.
LCM5327-24NAK
LCM5327-24NAK by Onsemi is a 640x480 pixel display with blue color, ideal for applications requiring a 5V supply voltage. With dimensions of 244x174x11 mm, it operates b/w temperatures of 10 to 40 °C. Perfect for monitors and displays needing high-quality visuals in various environments.
LTM12C275A
Toshiba
Displays; Height: 220 mm; Maximum Operating Temperature: 50 Cel; Viewing Area Length: 246 mm; Horizontal Pixel Count: 800 Pixel; Pixel Count (Vertical): 600 Pixel;
LTA400W1-L01
Samsung
Displays; Nominal Supply Voltage: 5 V; Length: 933 mm; Viewing Area Length: 872 mm; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 50 Cel;
DD-12864YO-3A
Densitron Technologies Plc
Displays;
NL128102AC28-07
Displays; Pixel Count (Vertical): 1024 Pixel; Viewing Area Length: 359 mm; Depth: 30 mm; Viewing Area Height: 287 mm; Nominal Supply Voltage: 12 V;
SCDQ5544R
Infineon Technologies
LCM5019
LCM5019 by Onsemi is a 5V display with 24 characters per row, featuring a character font type of 5x10 + CSR. With dimensions of 118mm x 36mm x 13mm, it operates b/w temperatures of 0 °C to 50°C. Ideal for applications requiring compact displays with clear visibility and easy integration.
LCM5167
LCM5167 by Onsemi is a 16-character, 5x7 + CSR font type display with a viewing area height of 14mm. Operating b/w 0-40 °C, it has a depth of 12mm and nominal voltage of 5V. Ideal for applications requiring compact displays with clear visibility in various temperature conditions.
ACM2402F-FL-GTH
Az Displays
DM1620-7HL3
The Onsemi DM1620-7HL3 display has 2 rows with 16 characters each in a 5x8 Dot font type. It operates b/w 0 to 50 °C, with a nominal voltage of 5V. With dimensions of 85x33x13mm, it is ideal for applications requiring compact and clear character displays.
NL10276BC20-05Y
Displays; Depth: 11 mm; Height: 185 mm; Pixel Count (Vertical): 768 Pixel; Viewing Area Height: 158 mm; Minimum Operating Temperature: 0 Cel;
LTD121EC5S
Displays; Color At Wavelength: White; Depth: 5 mm; Horizontal Pixel Count: 1024 Pixel; Viewing Area Length: 246 mm; Nominal Supply Voltage: 3.3 V;
DM1622-1AE1
DM1622-1AE1 by Onsemi is a 2-row display with 16 characters per row, featuring a character font type of 5x7 + CSR. With a height of 36mm and depth of 9.6mm, it operates b/w temperatures of 0 to 50 °C. Ideal for applications requiring compact displays with clear visibility and low power consumption at a nominal voltage of 5V.
DM1620-1SL3
The Onsemi DM1620-1SL3 display has 2 rows with 16 characters each in a 5x8 Dot font. It operates b/w 0 to 50 °C, powered by a nominal 5V supply. With dimensions of 85x33x13mm, it is ideal for applications requiring compact and clear alphanumeric displays.
NL12876AC39-01
Displays; Pixel Count (Vertical): 768 Pixel; Minimum Operating Temperature: 0 Cel; Height: 329 mm; Viewing Area Height: 301 mm; Viewing Area Length: 501 mm;
ACM2402F-FL-YTH
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ALP202CJX
Displays; Horizontal Pixel Count: 521 Pixel; Maximum Operating Temperature: 60 Cel; Pixel Count (Vertical): 218 Pixel; Length: 51 mm; Depth: 8.2 mm;
ALP208
Displays; Horizontal Pixel Count: 521 Pixel; Viewing Area Length: 37 mm; Depth: 3 mm; Pixel Count (Vertical): 218 Pixel; Height: 37 mm;
ALP210
Displays; Pixel Count (Vertical): 234 Pixel; Viewing Area Length: 41 mm; Length: 48 mm; Horizontal Pixel Count: 557 Pixel; Depth: 3 mm;
ALP215
Displays; Viewing Area Length: 37 mm; Depth: 3 mm; Viewing Area Height: 27 mm; Horizontal Pixel Count: 521 Pixel; Minimum Operating Temperature: -10 Cel;
ALP236FCX
Displays; Horizontal Pixel Count: 881 Pixel; Depth: 6 mm; Minimum Operating Temperature: -10 Cel; Viewing Area Length: 38 mm; Maximum Operating Temperature: 60 Cel;
ALP236FXX
Displays; Nominal Supply Voltage: 12 V; Length: 56.7 mm; Viewing Area Length: 38 mm; Minimum Operating Temperature: -10 Cel; Height: 47 mm;
ALP239CCX
Displays; Depth: 5.5 mm; Minimum Operating Temperature: -10 Cel; Viewing Area Height: 31 mm; Maximum Operating Temperature: 60 Cel; Pixel Count (Vertical): 234 Pixel;
ALP239CGX
Displays; Height: 42 mm; Viewing Area Length: 41 mm; Viewing Area Height: 31 mm; Pixel Count (Vertical): 234 Pixel; Horizontal Pixel Count: 557 Pixel;
ALP239CXX
Displays; Height: 40 mm; Length: 48 mm; Viewing Area Length: 41 mm; Horizontal Pixel Count: 557 Pixel; Viewing Area Height: 31 mm;
ALP248CXX
Displays; Pixel Count (Vertical): 234 Pixel; Length: 48 mm; Minimum Operating Temperature: -10 Cel; Nominal Supply Voltage: 8.5 V; Height: 40 mm;
ALP249FXX
Displays; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 60 Cel; Pixel Count (Vertical): 228 Pixel; Nominal Supply Voltage: 12 V; Length: 56.7 mm;
ALP242CGX
Sanyo Electric
Displays; Pixel Count (Vertical): 234 Pixel; Viewing Area Height: 27 mm; Nominal Supply Voltage: 8.5 V; Depth: 3 mm; Viewing Area Length: 37 mm;
Displays; Height: 36 mm; Viewing Area Length: 37 mm; Horizontal Pixel Count: 521 Pixel; Minimum Operating Temperature: -10 Cel; Pixel Count (Vertical): 218 Pixel;
Displays; Viewing Area Length: 37 mm; Depth: 3 mm; Height: 37 mm; Pixel Count (Vertical): 218 Pixel; Maximum Operating Temperature: 60 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved