Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NXP Semiconductors' TJA1051T/3/2Z is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening level, and 110 mA max supply current. It comes in a small outline package for automotive network interfaces applications.
Median Price
$1.052
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.280
100+ parts
$0.738
1k+ parts
$0.642
10k+ parts
$0.509
Mouser Electronics
$1.430
$0.836
$0.734
$0.678
DigiKey
$0.835
$0.744
-
Newark
$1.440
$0.897
Element14
$2.010
$1.180
$1.050
$1.030
EBV Elektronik
Arrow
$0.651
Future Electronics
$0.595
Verical
$0.639
Avnet
$0.634
Flip Electronics (Authorized)
Rochester
$0.825
$0.685
$0.611
Nova Conductors
$0.786
IBS Electronics
$0.968
$0.912
$0.827
Digiode
$1.064
Maritex
$2.045
$1.090
Chip Stock
NAC Semi
$0.862
Vyrian
Flip Electronics
Cyclops Electronics Ltd
Anansix
Continental Prestige Electronics
$0.746
$0.731
Argo Parts USA
Bastille Electronics
$0.747
$0.709
$0.700
Modulus Dynamics
$0.850
$0.841
$0.816
Semicontronic
$0.940
$0.916
Ampacity Inc.
Corphita
$1.008
Vigor
$1.140
Microchip USA
$4.435
Aztec Data Supply Inc.
$6.460
Corohmni
$13.007
Advanced Electronics
$16.246
$15.434
iodParts Technologies Inc.
Lixinc
Futuretech Components
Robosynatics
Lucentia Tech
UNI Independent Distributors
Authorized Procurement Solutions
The plastic/epoxy material used for the package body ensures durability and resistance to environmental factors, making this product a reliable choice for long-term use.
Being surface mountable helps in easy and efficient installation, making it suitable for various applications where space is limited.
The AEC-Q100 screening level ensures that the product meets automotive industry standards for reliability, quality, and performance, making it a trusted choice for automotive applications.
The rectangular shape of the package provides ease of handling and installation, fitting well in standard circuit board layouts.
Having 8 terminals allows for efficient connectivity and communication capabilities, making this product suitable for complex networking requirements.
The small outline package style saves space on the circuit board, making it a practical choice for compact electronic devices.
With a low maximum seated height, this product offers a slim profile, ideal for applications where space constraints are a concern.
The narrow width of 3.9 mm allows for efficient placement on the circuit board, enabling a compact design for the overall system.
The peak reflow temperature of 260°C ensures reliable soldering during manufacturing processes, contributing to the overall quality and performance of the product.
The length of 4.9 mm provides a compact form factor, suitable for applications where size and space-saving are important considerations.
The gull wing terminal form offers strong mechanical support and ease of soldering, enhancing the reliability and durability of the product.
The maximum supply current of 110 mA allows the product to operate efficiently without exceeding its power handling capabilities, ensuring stable performance.
The CAN transceiver type is suitable for communication in automotive and industrial applications, providing reliable and efficient data transmission.
With a nominal supply voltage of 5V, this product can be easily integrated into various electronic systems, offering compatibility and ease of use.
The terminal pitch of 1.27 mm allows for precise connection and alignment on the circuit board, ensuring secure and reliable electrical connections.
With a data rate of 5 Mbps, this product offers high-speed communication capabilities, making it suitable for applications requiring fast and efficient data transfer.
Network Interfaces TJA1051T/3/2Z attributes and parameters. Explore more Network Interfaces devices from NXP Semiconductors
Data Rate:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
TJA1051T/3/2Z Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - All Dev Label Update 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LAN8710A-EZC-TR-ABC
Microchip Technology
LAN8710A-EZC-TR-ABC by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at -40 to 85°C. Features 32 terminals in a square chip carrier package for network interfaces. Ideal for telecom applications requiring TS 16949 screening and 1.2V supply voltage.
TJA1052IT/1
NXP Semiconductors
NXP Semiconductors' TJA1052IT/1 is a 16-terminal network interface IC with AEC-Q100 screening for automotive applications. It operates at 1 Mbps data rate, supports dual terminal position, and has a nominal voltage of 5V. The small outline package style measures 10.3mm x 7.5mm x 2.65mm and can withstand temperatures from -40°C to 125°C, making it ideal for automotive communication systems.
TJA1145AT/FD/0Z
NXP Semiconductors' TJA1145AT/FD/0Z is a CAN transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at 5V nominal voltage and has a max supply current of 65mA. The package style is small outline with gull wing terminal form, making it ideal for surface mount applications.
TLE6250GV33
Infineon Technologies
TLE6250GV33 by Infineon Technologies is a CAN transceiver with 1 Mbps data rate, operating at 3.3V nominal voltage. It features BICMOS technology, AEC-Q100 screening level, and GULL WING terminal form. Ideal for automotive network interfaces due to its small outline package style and dual terminal position.
PCA82C250T
Philips Semiconductors
PCA82C250T by Philips Semiconductors is a CAN transceiver with 1 transceiver. It operates at a nominal voltage of 5V and has a temperature range of -40 to 125°C. This network interface IC is commonly used in automotive applications.
TCAN334DCNR
TCAN334DCNR by Texas Instruments is a network interface IC with 8 terminals, operating temperature range of -40 to 125°C, and data rate of 1 Mbps. It is designed for automotive applications requiring a low profile package style and operates at a nominal voltage of 3.3V.
TCAN334GDCNR
TCAN334GDCNR by Texas Instruments is a Network Interface IC with 8 terminals, operating temperature range of -40 to 125°C, and data rate of 5 Mbps. It is designed for automotive applications requiring a small outline package with low profile and shrink pitch. The IC operates at a nominal voltage of 3.3V and features gull wing terminal form for easy installation in telecom interfaces.
IFX1050GVIOXUMA1
IFX1050GVIOXUMA1 by Infineon Technologies is a CAN transceiver with 1Mbps data rate, suitable for automotive applications. It operates at -40 to 125°C temperature range and requires 3.3V supply voltage. The small outline package has 8 terminals, Gull Wing form, and measures 5x4mm in size.
KSZ8091RNBCA-TR
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
SN65HVD251DRG4
SN65HVD251DRG4 by Texas Instruments is a BICMOS interface circuit with 1Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 125°C and requires a 5V power supply. This small outline package has dual terminals and is designed for surface mount assembly.
TCAN1051HVDRBRQ1
TCAN1051HVDRBRQ1 by Texas Instruments is a network interface IC with AEC-Q100 screening. It operates b/w -55 to 125°C, has 8 terminals, and supports a data rate of 2 Mbps. Ideal for automotive applications requiring a reliable interface circuit in harsh environments.
DP83848MPHPEP
DP83848MPHPEP by Texas Instruments is a 3.3V Ethernet transceiver with data rate of 100000 Mbps. It operates in temperatures from -55 to 125°C, suitable for military-grade applications. The package is a square flatpack with gull wing terminals, ideal for network interfaces requiring high performance in compact spaces.
ISO1050DW
ISO1050DW by Texas Instruments is a network interface IC with 16 terminals in a small outline package. It operates at temperatures ranging from -55 to 105 °C and has a nominal voltage of 5V. This interface circuit is commonly used in telecom applications.
88E1111-B2-BAB2I000
Marvell Technology
Marvell Technology's 88E1111-B2-BAB2I000 is a CMOS Ethernet transceiver with 117 terminals in a low-profile grid array package. It operates at a nominal voltage of 1V and has a compact size of 10mm width and 14mm length. Ideal for network interfaces, this surface-mount device is designed for telecom applications.
LAN8742-CZ-TR
LAN8742-CZ-TR by Microchip: 3.3V supply, 100 Mbps data rate, quad terminal position. Telecom IC for Ethernet transceiver with square package shape and 24 terminals. Ideal for network interfaces in commercial applications.
LTC2875HDD#PBF
Analog Devices
LTC2875HDD#PBF by Analog Devices is a BICMOS technology interface circuit with 8 terminals, matte tin finish, and operates b/w -40 to 125 °C. It's a small outline package suitable for automotive applications, with a nominal voltage of 3.3 V. Ideal for network interfaces in compact designs requiring high-temperature tolerance.
PCA82C251T/N3,118
PCA82C251T/N3,118 by NXP Semiconductors is a network interface chip with 1 transceiver. It operates at a supply voltage of 5V and has a temperature range of -40 to 125 °C. It is commonly used in automotive applications due to its small size and moisture resistance.
SN65HVD234DG4
SN65HVD234DG4 by Texas Instruments is a Network Interface IC with 3.3V supply voltage, operating temperature range of -40 to 125°C, and Gull Wing terminal form. It is ideal for automotive applications requiring small outline package style and interface circuit telecom IC type.
NCV7351D1ER2G
NCV7351D1ER2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It offers a data rate of 1 Mbps and is suitable for automotive applications due to its temperature grade and moisture sensitivity level. The package style is small outline, making it ideal for surface mount applications in the automotive industry.
KSZ8893MQLI
LAN SWITCHING CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TJA1051TK/3,118
NXP Semiconductors' TJA1051TK/3,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It features AEC-Q100 screening level for automotive applications. This small outline package has 8 terminals, 0.65mm pitch, and operates at peak reflow temperature of 260°C.
TJA1042T/3,118
NXP Semiconductors' TJA1042T/3,118 is a network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its temperature grade. The IC features a small outline package style, Gull Wing terminal form, and nickel palladium gold silver finish.
TJA1042TK/3/1J
NXP Semiconductors' TJA1042TK/3/1J is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening level, and 8 terminals. It operates b/w -40 to 150°C, has a supply voltage of 5V, and consumes only 0.07 mA. Ideal for automotive applications due to its small outline package style and dual terminal position.
TJA1051T/3/1J
NXP Semiconductors' TJA1051T/3/1J is a CAN transceiver with 8 terminals, operating at 5V and 1Mbps data rate. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package measures 4.9mm x 3.9mm x 1.75mm and supports surface mount assembly.
TJA1051T/3,118
NXP Semiconductors' TJA1051T/3,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It operates in automotive grade temperatures (-40 to 125°C) and has AEC-Q100 screening level for reliability. With a small outline package style, it's ideal for automotive network interfaces.
TJA1051TK/3/1J
NXP's TJA1051TK/3/1J is an AEC-Q100 compliant CAN transceiver with 5 Mbps data rate, operating at 5V. It features a small outline package with 8 terminals and peak reflow temp of 260°C. Ideal for automotive applications requiring high-speed network interfaces in compact spaces.
TJA1050T/CM,118
TJA1050T/CM,118 by NXP Semiconductors is a network interface IC with 1 transceiver. It operates at a data rate of 1 Mbps and has a nominal voltage of 5V. This small outline package is commonly used in automotive applications.
TJA1042TK/3,118
NXP Semiconductors' TJA1042TK/3,118 is an AEC-Q100 compliant network interface with 8 terminals and 5V supply voltage. Operating b/w -40 to 125 °C, it supports data rates up to 1 Mbps. Ideal for automotive applications requiring a compact, low-power interface circuit.
TJA1043T,118
NXP Semiconductors' TJA1043T,118 is a CAN transceiver with 5V nominal voltage and 1Mbps data rate. It features 14 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures reliability in harsh environments.
TJA1042T/3/1J
NXP Semiconductors' TJA1042T/3/1J is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminals, and supports a 5V supply voltage. Ideal for interface circuits in automotive applications due to its robust design and high-temperature tolerance.
TJA1051T/3/CM,118
NXP Semiconductors' TJA1051T/3/CM,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It features 8 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures high reliability in harsh environments.
TJA1042T/3/CM,118
NXP Semiconductors' TJA1042T/3/CM,118 is a network interface with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for interface circuits in automotive applications. The small outline package with matte tin finish and gull wing terminals makes it ideal for surface mount designs.
TJA1043T/1J
NXP Semiconductors' TJA1043T/1J is a 14-terminal interface circuit with AEC-Q100 screening. It operates at 5V nominal voltage, suitable for automotive applications. With small outline package style and gull wing terminal form, it measures 8.65mm x 3.9mm x 1.75mm for compact designs.
TJA1042T/1J
NXP Semiconductors' TJA1042T/1J is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminal form, and supports a nominal voltage of 5V. Ideal for interface circuits in automotive applications requiring robust communication solutions.
TJA1040T/CM,118
NXP Semiconductors' TJA1040T/CM,118 is a CMOS interface circuit with 8 terminals and 1 Mbps data rate. It operates at 5V supply voltage, consuming 0.07 mA current. Ideal for network interfaces in automotive applications due to its small outline package and dual terminal position.
TJA1021TK/20/C,118
NXP Semiconductors' TJA1021TK/20/C,118 is a LIN transceiver with 8 terminals. It operates b/w -40 to 150°C, suitable for automotive applications. The package style is small outline with a max seated height of 0.8mm, making it ideal for space-constrained designs.
TJA1051T/E/1J
NXP Semiconductors' TJA1051T/E/1J is an AEC-Q100 compliant CAN transceiver with 8 terminals, operating at 5V and 1Mbps data rate. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package measures 4.9mm x 3.9mm x 1.75mm, making it ideal for space-constrained designs.
TJA1051T/E,118
NXP Semiconductors' TJA1051T/E,118 is a CAN transceiver with 1 Mbps data rate and 5V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has AEC-Q100 screening level. This small outline package with gull wing terminals is ideal for automotive network interfaces.
TJA1051T/1J
TJA1051T/1J by NXP Semiconductors is a CAN transceiver with 8 terminals, operating at 5V and supporting data rates up to 1 Mbps. It has a temperature range of -40 to 125°C, making it suitable for automotive applications. The package style is small outline with gull wing terminals, ideal for surface mount designs.
TJA1042T/3,112
NXP Semiconductors' TJA1042T/3,112 is an AEC-Q100 compliant network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its wide temperature range (-40 to 125°C) and small outline package style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved