Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CROSS POINT SWITCH; Temperature Grade: OTHER; No. of Terminals: 28; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$1.118
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
$1.125
100+ parts
$1.058
1k+ parts
$0.956
10k+ parts
-
DigiKey
$1.110
Digiode
$1.069
Vyrian
Anansix
Corphita
$1.012
Native Components
$656.840
$643.703
$637.135
$630.566
Northwest PG Solutions
$722.524
QUARKTWIN TECHNOLOGY LTD
Microchip USA
UNI Independent Distributors
Multiplexers & Switches CBTL04GP043EX,118 attributes and parameters. Explore more Multiplexers & Switches devices from NXP Semiconductors
Other IC type:
JESD-30 Code:
Length:
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
CBTL04GP043EX,118 Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
1552200168
Molex
WIRE AND CABLE;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Changzhou Starsea Electronics
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
ADG1436YCPZ-REEL
Analog Devices
ADG1436YCPZ-REEL by Analog Devices is a 2-function multiplexer with 16 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 4 ohm and switching voltage of +-5/+12/+-15 V. Ideal for automotive applications requiring fast switching and high isolation levels.
TS5A3159AYZPR
TS5A3159AYZPR by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 2.5 ohm and fast switching times of 75 ns on and 50 ns off. Ideal for industrial applications requiring high isolation (64 dB) and a bandwidth of 100 kHz.
SN74LV4052APWR
SN74LV4052APWR by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at a supply voltage range of 2V to 5.5V and offers a max on-state resistance of 225 ohm. With a nominal bandwidth of 50 kHz, it is ideal for industrial applications requiring high-speed signal switching in compact designs.
SIP32409DNP-T1-GE4
Vishay Intertechnology
Vishay Intertechnology's SIP32409DNP-T1-GE4 is a SPST switch with low 0.052 ohm Ron, suitable for industrial applications. It operates b/w -40 to 85 °C and supports Vsup from 1.1 to 5.5 V, making it ideal for various multiplexing tasks in compact designs. The small outline package with dual terminals and no lead form ensures easy integration in space-constrained environments.
TMUX136MRSER
TMUX136MRSER by Texas Instruments is a SPDT multiplexer with 2 channels and common output. It operates in industrial temperature range (-40 to 85 °C) with a max on-state resistance of 7.5 ohm. This chip carrier switch has a very thin profile, suitable for applications requiring low signal current up to 0.1 A at nominal bandwidth of 6100 kHz.
DG411DYZ
Intersil
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74LVC1G3157GW-Q10H
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS2052CDGN
TPS2052CDGN by Texas Instruments is a SPST switch with 8 terminals, operating at -40 to 85°C. It has a max on-state resistance of 0.095 ohm and can handle supply voltages from 4.5V to 5.5V. Ideal for industrial applications requiring common output switching with low power consumption.
DG408DY+T
Maxim Integrated
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD74HC4051M96G4
CD74HC4051M96G4 by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals, operating at -55 to 125 °C. It has a max on-state resistance of 270 ohm and can handle a signal current of 0.025 A. Ideal for military-grade applications requiring high bandwidth and low isolation.
MC14051BDR2G
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD74HCT4067M
Harris Semiconductor
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4066BCM
SPST; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG408DYZ-T
Renesas Electronics
The Renesas Electronics DG408DYZ-T is a CMOS single-ended multiplexer with 8 channels. It operates at temperatures ranging from -40 to 85°C and has a max on-state resistance of 100 ohm. With a package style of small outline, it is suitable for industrial applications requiring high-speed switching capabilities.
CD74HC4067ME4
CD74HC4067ME4 by Texas Instruments is a CMOS multiplexer with 16 channels, 180 ohm max resistance, and 75 dB isolation. It operates b/w -55 to 125 °C with a supply voltage range of 2-6 V. Ideal for applications requiring precise signal routing in compact electronic systems.
TS5A3166DCKRG4
TS5A3166DCKRG4 by Texas Instruments is a SPST switch with 3.9 ohm Ron, 18 ns switch-on time, and 62 dB isolation. Ideal for industrial applications requiring a small outline package with separate output and make-before-break switching capability at temperatures ranging from -40 to 85 °C.
ADG412BRZ
ADG412BRZ by Analog Devices is a CMOS SPST multiplexer with 4 functions, operating at -40 to 85°C. It has a max on-state resistance of 35 ohm and switching type is break-before-make. Ideal for industrial applications requiring separate outputs and high off-state isolation of 68 dB.
ADG819BRTZ-REEL
ADG819BRTZ-REEL by Analog Devices is a SPDT switch with 6 terminals, operating at a supply voltage range of 1.8V to 5.5V. It offers a max on-state resistance of 1.4 ohm and nominal off-state isolation of 71 dB, making it ideal for automotive applications requiring fast switching times and low power consumption. The switch features a small outline package with dual terminal position and Gull Wing form, suitable for surface mount PCB designs in temperature-sensitive environments.
TS5A23159DGSRE4
TS5A23159DGSRE4 by Texas Instruments is a 2-function SPDT switch with 1.8/5V power supplies, 2.5 ohm max on-state resistance, and 64dB nominal off-state isolation. Ideal for industrial applications, it operates b/w -40 to 85°C with a compact design of 3x3mm and 0.5mm terminal pitch for space-constrained PCBs.
ADG5436BRUZ-REEL7
ADG5436BRUZ-REEL7 by Analog Devices is a CMOS SPDT switch with 2 functions, 16 terminals, and 11 ohm on-state resistance. It operates at -40 to 125 °C and supports supply voltages of +-9/+-22/9/40 V. Ideal for automotive applications due to its small outline package and separate output feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CBTL04083ABS,518
NXP Semiconductors
NXP Semiconductors' CBTL04083ABS,518 is a 4-function differential multiplexer with 2 channels and 42 terminals. Operating at -40 to 85°C, it has a supply voltage of 3.3V and max current of 5mA. Ideal for industrial applications requiring high-temperature resistance and precise signal switching in compact chip carrier packages.
CBTL04083ABS,558
NXP Semiconductors' CBTL04083ABS,558 is a 4-function differential multiplexer with 2 channels. Operating at -40 to 85°C, it has a supply voltage of 3.3V and max current of 5mA. Ideal for industrial applications requiring high-temperature resistance and precise signal switching in compact chip carrier package.
CBTL04083ABS
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 42; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
CBTL02GP023HOZ
SPST; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
CBTL05024BSHP
DIFFERENTIAL MULTIPLEXER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
CBTL06121BHF,518
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 56; Package Code: QCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
CBTL04083BBS,558
CBTL06122BHF-T
CBTL04GP043EX
CBTL06141EE/G,118
Multiplexers or Switches; Temperature Grade: OTHER; No. of Terminals: 48; Package Code: FBGA; Package Shape: SQUARE; Surface Mount: YES;
CBTL06121AHF,518
CBTL04083BBS,518
Multiplexers or Switches; Temperature Grade: INDUSTRIAL; No. of Terminals: 42; Package Code: QCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
CBTL06122AHF-T
CBTL04GP043EXJ
CBTL05023BS,118
DIFFERENTIAL MULTIPLEXER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: QCCN; Surface Mount: YES; Nominal Supply Voltage (Vsup): 3.3 V;
CBTL02GP023
Multiplexers or Switches;
CBTL02042BBQ,115
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: QCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
CBTL04083BBS
CBTL05024BS
DIFFERENTIAL MULTIPLEXER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved