Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 68 W; Package Style (Meter): FLANGE MOUNT; Maximum Drain Current (Abs) (ID): 6 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
RFMW
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Anansix
Semtec, LLC
ACDS - Activité Composants Distribution Service
ECAB
Native Components
$0.975
Northwest PG Solutions
$1.073
Component Stockers USA
$6.330
$6.010
$5.830
UNI Independent Distributors
Alle Elektronik GmbH
Perfect Parts
Corphita
Metaverse IC Inc.
Kepictronics
Authorized Procurement Solutions
Power Field Effect Transistors (FET) BLF145 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from NXP Semiconductors
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation Ambient:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
BLF145 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LM358N
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
Itt Semiconductor
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
BSP318SH6327
Infineon Technologies
Infineon's BSP318SH6327 is a N-CHANNEL FET with 60V DS Breakdown Voltage and 10.4A IDM. Ideal for automotive applications due to AEC-Q101 standard compliance, it features 0.15 ohm RDS(ON) and 60mJ EAS rating.
IRLML2502TRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain-Source On Resistance: .045 ohm;
NDT456P
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Maximum Drain Current (ID): 7.5 A; No. of Elements: 1;
FDD8424H
FDD8424H by Onsemi is a Power FET with N-CHANNEL and P-CHANNEL configurations. It has a 40V DS breakdown voltage, 55A max pulsed drain current, and 0.024 ohm max drain-source resistance. Ideal for switching applications, this MOSFET operates in enhancement mode with a max temperature of 150°C.
IRLML6401GTRPBF
IRLML6401GTRPBF by Infineon is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 34A and EAS of 33mJ, suitable for high-power operations. With a small outline package style and GULL WING terminals, it operates in temperatures ranging from -55 to 150 °C.
FDD4243
The Onsemi FDD4243 is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, 60A IDM, and 0.064 ohm RDS. Ideal for power management applications due to its high current handling capability and low on-resistance. Suitable for use in various electronic devices requiring efficient power control in compact designs.
IRF640
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Terminal Position: SINGLE; No. of Terminals: 3;
IRLML2502TR
IRLML2502TR by International Rectifier is a N-CHANNEL FET for switching applications. It has a 20V DS breakdown voltage, 4.2A max drain current, and 0.045 ohm max on-resistance. With a built-in diode, it operates in enhancement mode with 33A pulsed drain current ideal for power management in compact electronic devices.
IRFP4568PBF
Infineon's IRFP4568PBF is a N-CHANNEL Power FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring 684A IDM and 0.0059 ohm RDS(on), it operates in ENHANCEMENT MODE up to 175°C. The PLASTIC/EPOXY package with THROUGH-HOLE terminals ensures reliable performance in high-power circuits.
IRF7420TRPBF
IRF7420TRPBF by Infineon is a P-CHANNEL FET with 12V DS Breakdown Voltage and 46A IDM. Ideal for SWITCHING applications, it has a single configuration with built-in diode in a small outline package. Operating from -55 to 150 °C, it offers 0.014 ohm Drain-Source On Resistance and 2.5W Power Dissipation.
CSD16301Q2
CSD16301Q2 by Texas Instruments is a N-CHANNEL Power FET with 25V DS Breakdown Voltage and 20A IDM. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 2.3W. This SMALL OUTLINE transistor has a -55 to 150 °C operating temperature range and 0.034 ohm Drain-Source On Resistance.
IRF530A
Samsung
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 55 W; Terminal Position: SINGLE; Maximum Drain-Source On Resistance: .11 ohm;
DMP4065S-7
Diodes Incorporated
DMP4065S-7 by Diodes Inc. is a P-channel FET with 40V DS breakdown voltage and 20A IDM, ideal for switching applications. It operates in enhancement mode, has 0.08 ohm RDS(on), and can handle up to 1.4W power dissipation. With a max temp of 150°C, it's suitable for various electronic designs requiring high-performance MOSFETs.
JANTX2N6796
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Elements: 1; Package Shape: ROUND; Transistor Application: SWITCHING;
FDMC86139P
FDMC86139P by Onsemi is a P-CHANNEL Power FET with 100V DS Breakdown Voltage and 30A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.067 ohm RDS(on), and operates in ENHANCEMENT MODE.
PSMN4R8-100BSEJ
PSMN4R8-100BSEJ by NXP is a single N-channel power FET with 120A max drain current and 405W max power dissipation. Ideal for applications requiring high-power handling in enhancement mode operation, such as automotive systems or industrial equipment.
IRF3205LPBF
IRF3205LPBF by Infineon is a N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features 390A IDM, 264mJ EAS, and 0.008 ohm RDS(on). With a max power dissipation of 200W and operating temperature of 175°C, it's suitable for high-power circuits requiring efficient switching capabilities.
IRLML0030TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; No. of Terminals: 3; Transistor Element Material: SILICON;
IRLML0030TRPBF-1
Infineon's IRLML0030TRPBF-1 is a N-channel Power FET with 30V DS breakdown voltage and 21A IDM. Ideal for applications requiring high power dissipation up to 1.3W, such as in small outline packages where space is limited. Operating in enhancement mode, it offers low 0.027 ohm drain-source resistance for efficient performance.
BSP295H6327XTSA1
BSP295H6327XTSA1 by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage and 7.2A max pulsed drain current. It is used in enhancement mode applications, featuring a built-in diode, 0.5 ohm max RDS(on), and AEC-Q101 standard compliance for automotive electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLF188XRU
N-CHANNEL; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 200 Cel;
BLF184XRU
N-CHANNEL; Maximum Operating Temperature: 200 Cel; Operating Mode: ENHANCEMENT MODE; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BLF177
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 220 W; Maximum Drain Current (Abs) (ID): 16 A; Maximum Drain Current (ID): 16 A;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 220 W; Maximum Drain Current (ID): 16 A; Maximum Drain Current (Abs) (ID): 16 A;
BLF184XRSU
BLF175
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 68 W; Maximum Drain Current (Abs) (ID): 4 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 68 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (ID): 4 A;
BLF178XR,112
N-CHANNEL; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 225 Cel;
BLF178XRS,112
BLF147
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 220 W; Operating Mode: ENHANCEMENT MODE; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Asi Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 220 W; Maximum Drain Current (ID): 25 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 220 W; Maximum Drain Current (Abs) (ID): 25 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BLF1822-10,112
N-CHANNEL; Configuration: SINGLE; No. of Elements: 1; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Operating Temperature: 200 Cel; Maximum Drain Current (ID): 2.2 A;
BLF10M6LS200U
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 225 Cel; No. of Elements: 1;
BLF183XRSU
N-CHANNEL; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 225 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BLF183XRU
N-CHANNEL; Surface Mount: YES; Maximum Operating Temperature: 225 Cel; Operating Mode: ENHANCEMENT MODE; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BLF1046,135
N-CHANNEL; Configuration: SINGLE; Maximum Drain Current (ID): 4.5 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; No. of Elements: 1; Maximum Operating Temperature: 200 Cel;
BLF145,112
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 68 W; Maximum Power Dissipation Ambient: 68 W; Maximum Drain-Source On Resistance: .75 ohm;
BLF1043,135
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): 2.2 A; Maximum Drain Current (ID): 2.2 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved