Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NM27C128Q150 by National Semiconductor is a 16KX8 EPROM with 150 ns access time, operating at 5V. It features a 3-STATE output and supports parallel mode. Ideal for applications requiring non-volatile memory storage in commercial temperature environments.
Median Price
$9.700
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
DF Sales Co.
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Anansix
Vyrian
Manoshevitz Elec. Sales
First Choice Components Inc.
BCID Electronics Ltd.
Nova Conductors
Fibra_Brandt Electronic GMBH
Digiode
Speed Components Ltd
Bristol Electronics
Semtec, LLC
ComSIT Distribution GmbH
R&J Components
Component Sense
J & M Industries LLC
North Shore Components
Prism Electronics
LWI Electronics Inc
Ampacity Inc.
$4.000
Andel Nordic
$20.480
$14.339
RC Electronics
Argo Parts USA
Continental Prestige Electronics
Authorized Procurement Solutions
Corphita
Assy Fe
Supply Digital
Microchip USA
Kepictronics
Futuretech Components
Aranea Global
GreenTree Electronics
Giza Technologies, Inc.
Speed Components Ltd (Excess)
The ceramic, glass-sealed package body material provides durability and protection for the EPROM chip, making it reliable for long-term use.
Operating at a standard voltage of 5V ensures compatibility with most systems and devices, making it a versatile choice for various applications.
The 3-STATE output characteristics allow for high flexibility in controlling the output signals, enabling efficient data transfer and processing.
CMOS technology offers low power consumption and high noise immunity, contributing to energy efficiency and reliable performance of the EPROM.
The fast maximum access time of 150 ns ensures quick data retrieval and processing, making the EPROM suitable for applications requiring high-speed performance.
EPROM NM27C128Q150 attributes and parameters. Explore more EPROM devices from National Semiconductor
Maximum Access Time:
Input/Output Type:
JESD-30 Code:
JESD-609 Code:
Memory Density:
Memory IC Type:
Memory Width:
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Power Supplies (V):
Programming Voltage (V):
Qualification:
Maximum Seated Height:
Maximum Standby Current:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
NM27C128Q150 Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.61
SB
8542.32.00.60
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
General Diode
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Siemens
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Fairchild Semiconductor
EU2B-YS2J03C
Idec
ROTARY SWITCH;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
5962-8751501LX
STMicroelectronics
5962-8751501LX by STMicroelectronics is a military-grade EPROM with a 5V supply, featuring an asynchronous operation mode and a max access time of 45 ns. It offers an organization of 8Kx8 and operates in extreme temperatures from -55 °C to 125 °C. Ideal for reliable data storage in harsh environments, this UVPROM ensures durability and performance.
SMJ27C256JM
SMJ27C256JM by Texas Instruments is a 32KX8 EPROM with 3-STATE output, operating at -55 to 125 °C. It has a programming voltage of 12.5V and memory density of 262144 bit. Ideal for military applications requiring reliable non-volatile memory with fast access time of 250 ns.
TMS27C010A-100JE
TMS27C010A-100JE by Texas Instruments is a 128KX8 EPROM with 100 ns access time, operating at 5V. It features 3-STATE output and CMOS technology, suitable for industrial applications requiring reliable non-volatile memory storage. The package style is in-line, window with through-hole terminals.
M27C1001-15XF3X
STMicroelectronics M27C1001-15XF3X is a 128Kx8 EPROM with 120ns access time, operating at 5V. It features CMOS technology, 32 terminals in an IN-LINE package for automotive applications. With a memory density of 1048576 bits and parallel interface, it offers reliable non-volatile memory storage.
TMS27C020-150JE4
TMS27C020-150JE4 by Texas Instruments is a 256KX8 EPROM with 150 ns access time, operating at 5V. It features 3-STATE output and INDUSTRIAL temperature grade suitable for parallel applications. The UVPROM memory IC has a memory density of 2097152 bit and consumes up to 30 mA supply current.
TMS27C010A-12JE
TMS27C010A-12JE by Texas Instruments is a 128KX8 EPROM with 120 ns access time, 5V supply voltage, and 32 terminals. It is used in industrial applications for storing data in parallel format with a memory density of 1048576 bit.
5962-8606306YX
5962-8606306YX by STMicroelectronics is a military-grade EPROM with a 32Kx8 organization, operating at 5V. It features asynchronous mode and a max access time of 120 ns, ideal for high-reliability applications in harsh environments. Its ceramic, metal-sealed package ensures durability.
M27C512-20XF1
M27C512-20XF1 EPROM by STMicroelectronics features 64KX8 organization, 200ns access time, and 5V nominal voltage. Ideal for applications requiring reliable non-volatile memory storage in commercial temperature environments.
TMS27C32-120JE
TMS27C32-120JE by Texas Instruments is a 4KX8 EPROM with 120 ns access time, operating at 5V. It features a CMOS technology, 3-STATE output characteristics, and INDUSTRIAL temperature grade. Commonly used in parallel applications due to its 24 terminals and through-hole terminal form.
NM27C128Q150
National Semiconductor
D27C64-25
Rochester Electronics
D27C64-25 by Rochester Electronics is an EPROM with 8KX8 organization, 8192 words, and 65536 bit memory density. It operates at a max temperature of 70°C and has a programming voltage of 12.5V. Ideal for applications requiring reliable non-volatile memory storage in commercial-grade environments.
NM27C010Q120
UVPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: WDIP; Package Shape: RECTANGULAR; Organization: 128KX8;
M27C2001-10F1
M27C2001-10F1 by STMicroelectronics is a 256KX8 EPROM with an operating voltage of 5V. It has a max access time of 100ns and is commonly used in applications requiring non-volatile memory storage.
TMS27C128-2JE
TMS27C128-2JE by Texas Instruments is a 16KX8 EPROM with 3-STATE output, operating at 5V. It has a max access time of 200ns and memory density of 131072 bits. Ideal for industrial applications requiring reliable non-volatile memory storage in a ceramic, glass-sealed package.
M27C1001-15F1E
M27C1001-15F1E by STMicroelectronics is a 128Kx8 UVPROM with a max access time of 150 ns, operating at 5V. It features a ceramic, metal-sealed package and operates asynchronously. Ideal for commercial applications requiring reliable data storage in compact designs.
M27C1001-12XL6
M27C1001-12XL6 by STMicroelectronics is a 128KX8 EPROM with 120 ns access time, operating at 5V. It features a CMOS technology, 3-STATE output characteristics, and industrial temperature grade. Commonly used in applications requiring non-volatile memory storage with parallel interface.
5962-01-354-7978
Texas Instruments' 5962-01-354-7978 EPROM features 32KX8 organization, 262144-bit memory density, and 200 ns max access time. Ideal for applications requiring a CMOS technology-based device with a 5V nominal voltage and common I/O type.
TMS27C510-150JL4
TMS27C510-150JL4 by Texas Instruments is a 64KX8 EPROM with 150 ns access time, 524288 bit memory density, and operates at 5V. Commonly used in commercial applications for storing data due to its 3-STATE output characteristics and parallel interface.
5962-8766105XX
The Texas Instruments 5962-8766105XX is an EPROM with 16KX8 organization, CMOS technology, and 131072 bit memory density. It operates in asynchronous mode at temperatures ranging from -55 to 125 °C and is ideal for military-grade applications requiring fast access times of up to 200 ns.
M27C1024-10F1
STMicroelectronics' M27C1024-10F1 EPROM features 64KX16 organization, 100 ns access time, and 5V nominal voltage. Commonly used in commercial applications, this UVPROM memory IC operates in parallel mode with a max standby current of 0.0001 Amp.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UVPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Organization: 16KX8;
UVPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR; JESD-30 Code: R-GDIP-T28;
UVPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: WDIP; Package Shape: RECTANGULAR; No. of Words Code: 128K;
UVPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: WDIP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 70 Cel;
NM27C256QE120
UVPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR; Package Style (Meter): IN-LINE, WINDOW;
UVPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
UVPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Package Style (Meter): IN-LINE;
NM27C128Q100
EPROMs; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
NM27C128QM120
EPROMs; Temperature Grade: MILITARY; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Standby Current: .0001 Amp;
NM27C128QM150
EPROMs; Temperature Grade: MILITARY; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Programming Voltage (V): 12.75;
NM27C128QE120
UVPROM; Temperature Grade: MILITARY; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR; Package Body Material: CERAMIC, GLASS-SEALED;
NM27C128Q200
UVPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR; Maximum Access Time: 200 ns;
NM27C128Q120
UVPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR; Memory Density: 131072 bit;
NM27C128QE150
UVPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR; Operating Mode: ASYNCHRONOUS;
NM27C128QE200
UVPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR; Parallel or Serial: PARALLEL;
NM27C128Q250
UVPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Memory Width: 8;
UVPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Package Body Material: CERAMIC, GLASS-SEALED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved