Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NDS9407/D84Z by National Semiconductor is a P-CHANNEL small signal FET with a min DS breakdown voltage of 60V. It is used for switching applications and has a max drain current of 3A and max operating temperature of 150°C.
Median Price
$1.553
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$1.476
1k+ parts
10k+ parts
-
Digiode
$1.475
Vyrian
Anansix
Nova Conductors
Ampacity Inc.
$1.320
Semicontronic
$1.287
$1.280
Corphita
$1.398
Aztec Data Supply Inc.
Advanced Electronics
Corohmni
$1.764
AZTECH Wire
$14.026
Continental Prestige Electronics
Argo Parts USA
Supply Digital
Bastille Electronics
This product is made with a plastic/epoxy package body material, providing durability and ease of handling.
Featuring a P-channel type, this field effect transistor allows for efficient signal switching and reliable performance.
The inclusion of a built-in diode in this transistor's single configuration enhances its functionality and versatility, making it a practical choice for various applications.
Designed specifically for switching applications, this small signal field effect transistor delivers efficient and reliable performance in switching circuits.
With surface mount capability, this transistor can be easily mounted onto PCBs, making it a convenient choice for compact and space-limited designs.
This field effect transistor has a minimum DS breakdown voltage of 60 V, providing a high voltage tolerance and ensuring safe and reliable operation in demanding environments.
The rectangular package shape of this transistor facilitates easy integration into circuit designs, allowing for space-efficient arrangements.
Featuring a gull wing terminal form, this transistor ensures reliable electrical connections and facilitates simple soldering processes during assembly.
This transistor operates in enhancement mode, offering improved control and reduced power consumption, making it an energy-efficient choice for various applications.
With a single element, this transistor simplifies circuit design and reduces component complexity, leading to easier implementation and potential cost savings.
Featuring 8 terminals, this transistor provides multiple connection points, allowing for flexible circuit configurations and enabling compatibility with a range of circuit layouts.
The small outline package style of this transistor ensures space-saving installation and compatibility with compact electronic devices, providing design flexibility.
Built with metal-oxide semiconductor technology, this transistor offers high-speed operation, low power consumption, and enhanced overall performance.
With a maximum power dissipation of 1 W in ambient conditions, this transistor can handle moderate power levels without overheating, ensuring reliable operation.
With a maximum operating temperature of 150°C, this transistor is suitable for use in high-temperature environments, providing stability and performance under challenging conditions.
Built with silicon transistor elements, this product delivers excellent performance characteristics such as low noise, high gain, and reliable signal amplification.
This transistor has a maximum drain current of 3 A, allowing it to handle high current levels effectively and making it suitable for demanding applications.
Featuring a maximum drain-source on resistance of 0.15 ohm, this transistor delivers low conduction losses and efficient power transfer, resulting in improved overall system performance.
With dual terminal positions, this transistor offers flexibility in circuit connectivity and facilitates easy integration with other components, supporting versatile and customizable circuit designs.
Small Signal Field Effect Transistors (FET) NDS9407/D84Z attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from National Semiconductor
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation Ambient:
Qualification:
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
NDS9407/D84Z Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
1552200168
Molex
WIRE AND CABLE;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS123-7-F
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
BS170
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Additional Features: LOGIC LEVEL COMPATIBLE; No. of Elements: 1; Transistor Application: SWITCHING;
NX3008PBK,215
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; Maximum Time At Peak Reflow Temperature (s): 30; JEDEC-95 Code: TO-236AB;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
2N7002PV,115
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain-Source On Resistance: 1.6 ohm;
FDC6321C
FDC6321C by Onsemi is a Small Signal FET with N/P-Channel, 2 elements in plastic/epoxy package. It operates in enhancement mode for switching applications, with max power dissipation of 0.9W and max operating temp of 150°C. Featuring dual terminals and low on-resistance at 0.45 ohm, it's ideal for compact electronic designs requiring efficient power management.
SI2309CDS-T1-GE3
Vishay Intertechnology
SI2309CDS-T1-GE3 by Vishay Intertechnology is a P-CHANNEL FET for SWITCHING applications. It features 60V DS Breakdown Voltage, 1.6A Drain Current, and 0.345 ohm On Resistance. With ENHANCEMENT MODE operation, this transistor has a max power dissipation of 1.7W and operates b/w -55 to 150 °C temperature range.
2N7002-T
2N7002-T by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS Breakdown Voltage of 60V and Max Drain Current of 0.3A. It is used for SWITCHING applications, operates in ENHANCEMENT MODE, and has a max operating temperature of 150°C.
SI4459ADY-T1-GE3
SI4459ADY-T1-GE3 by Vishay Intertechnology is a P-CHANNEL FET with 30V DS Breakdown Voltage, 29A Drain Current, and 0.005 ohm On Resistance. Ideal for SWITCHING applications, it features ENHANCEMENT MODE operation in a RECTANGULAR package with GULL WING terminals.
FDC5612_NL
Fairchild Semiconductor
FDC5612_NL by Fairchild Semiconductor is a N-CHANNEL FET with 60V DS breakdown voltage and 4.3A max drain current, ideal for switching applications. It features a built-in diode, operates in enhancement mode, and has a max power dissipation of 1.6W. This small outline transistor with GULL WING terminals is designed for surface mount applications at temperatures up to 150°C.
NDC7003P
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 6;
SI2315BDS-T1-E3
Vishay Intertechnology's SI2315BDS-T1-E3 is a P-CHANNEL FET with 12V DS Breakdown Voltage, 2.8A Drain Current, and 0.05 ohm On Resistance. Ideal for small signal applications in electronics due to its compact SMALL OUTLINE package and -55 to 150 °C operating temperature range.
FDN304PZ
FDN304PZ by Onsemi is a P-CHANNEL FET with 20V DS breakdown voltage, ideal for switching applications. It features a max drain current of 2.4A and 0.052 ohm on-resistance, operating in enhancement mode at up to 150°C. This small outline transistor with gull wing terminals is designed for surface mount configurations.
BSS138WG
Changzhou Galaxy Century Microelectronics
BSS138WG by Changzhou Galaxy Century Microelectronics is a N-CHANNEL FET with 50V DS breakdown voltage, ideal for SWITCHING applications. It features SINGLE configuration with built-in diode, GULL WING terminals, and operates in ENHANCEMENT MODE. With 0.2W power dissipation and -55 to 150 °C operating temperature range, it offers reliable performance in various electronic circuits.
SI2347DS-T1-GE3
SI2347DS-T1-GE3 by Vishay Intertechnology is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max ID of 5A, 0.042 ohm Drain-Source On Resistance, and operates in ENHANCEMENT MODE. With a small outline package style and peak reflow temperature of 260°C, it is suitable for various electronic devices requiring high power dissipation.
2N7000
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
BSS84
Lite-on Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Maximum Drain-Source On Resistance: 10 ohm; Terminal Form: GULL WING;
ZXMP4A16GTA
Zetex Plc
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.9 W; JESD-609 Code: e3; Maximum Operating Temperature: 150 Cel;
NDC7002N
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Package Body Material: PLASTIC/EPOXY; Operating Mode: ENHANCEMENT MODE;
BVSS138LT1G
BVSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications, it operates b/w -55 to 150 °C and complies with AEC-Q101 standard.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NDS9407
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NDS9407 by Onsemi is a P-CHANNEL FET with 60V DS breakdown voltage and 3A max drain current. Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating from -55 to 175°C, this MOSFET has 0.15 ohm max on resistance and matte tin terminal finish.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; No. of Elements: 1; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NDS9407_NL
NDS9407_NL by Fairchild Semiconductor is a P-CHANNEL FET for SWITCHING applications. It features 60V DS Breakdown Voltage, 3A Drain Current, and 0.15 ohm On Resistance. With a PLASTIC/EPOXY body and GULL WING terminals, it operates in temperatures from -55 to 175 °C.
NDS9407D84Z
NDS9407D84Z by Fairchild Semiconductor is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a SINGLE configuration with BUILT-IN DIODE and operates in ENHANCEMENT MODE. With 3A ID and 0.15 ohm RDS(on), this MOSFET has GULL WING terminals and can withstand up to 150°C operating temperature.
NDS9435A
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Transistor Application: SWITCHING; Package Shape: RECTANGULAR;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Style (Meter): SMALL OUTLINE; JESD-609 Code: e3;
NDS9430
NDS9430 by Onsemi is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 5.3A, 0.06 ohm Drain-Source Resistance, and operates in ENHANCEMENT MODE. The transistor comes in an 8-terminal GULL WING package with METAL-OXIDE SEMICONDUCTOR technology and can withstand temperatures up to 175°C.
NDS9405/L86Z
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 20 V; No. of Elements: 1;
NDS9400A/L86Z
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; No. of Terminals: 8; Operating Mode: ENHANCEMENT MODE;
NDS9400A/L99Z
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Qualification: Not Qualified; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 30 V;
NDS9407/L86Z
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Form: GULL WING; Terminal Position: DUAL; No. of Elements: 1;
NDS9407/L99Z
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Terminals: 8; Package Style (Meter): SMALL OUTLINE; Qualification: Not Qualified;
NDS9407/S62Z
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Minimum DS Breakdown Voltage: 60 V; Terminal Form: GULL WING;
NDS9400A
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: .13 ohm;
NDS9405
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Style (Meter): SMALL OUTLINE; Transistor Application: SWITCHING;
NDS9400AD84Z
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE; Transistor Element Material: SILICON;
NDS9407L86Z
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Terminals: 8; Maximum Drain-Source On Resistance: .15 ohm; Maximum Drain Current (ID): 3 A;
NDS9407S62Z
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; No. of Terminals: 8; Package Style (Meter): SMALL OUTLINE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved