Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PULSE; RECTANGULAR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$2.360
Lifecycle Status
Suppliers In-Stock
61
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.250
100+ parts
$1.300
1k+ parts
$1.170
10k+ parts
-
DigiKey
$2.470
$1.502
$1.354
$1.276
Mouser Electronics
$2.620
$1.880
$1.540
$1.140
Verical
$1.398
$1.316
$1.223
Freelance Electronics
$0.324
DF Sales Co.
$1.500
Nova Conductors
$1.821
Digiode
$2.138
Greenchips
$2.185
$1.576
$1.073
$0.961
Component Electronics Inc.
$3.850
$2.880
$2.500
Chip Stock
Corel Iberica Componentes, S.L.
Vyrian
Prism Electronics
Connector Distribution Corp
Right Parts Inc.
Martec Srl
Atlantic Semiconductor
Anansix
Sogenti Electronics
LIBRA Elektronik GmbH
Pegasus Components GmbH
Mil-Aero Solutions, Inc.
Component Sense
ComSIT Distribution GmbH
Classic Components Corporation
R&J Components
A2Z Electronics, Inc.
ECAB
First Choice Components Inc.
Electronics Depot
Resion
NPI Materials, Inc.
Cyclops Electronics Ltd
ComSIT USA
Sunrise Surplus Inc.
ACDS - Activité Composants Distribution Service
Q Components
Semi Source
QIE Inc.
Electronic Expediters
Inventory MP
Whistler Technology
J & M Industries LLC
Goldney Electronics S.L.
EMSNET
Speed Components Ltd
Avant Electronics Limited
PC Components Company LLC
Bristol Electronics
LWI Electronics Inc
Rebound Electronics
Elcom Components
Manotoh
Bisco
Odintec Ltd.
Manoshevitz Elec. Sales
Extreme Components
Cogito LLC
GES GmbH
Continental Prestige Electronics
$1.230
$1.206
Argo Parts USA
Corohmni
$1.297
Advanced Electronics
$1.336
$1.269
Netroflash
$1.730
$1.693
Ampacity Inc.
$1.910
Semicontronic
$1.862
$1.853
Modulus Dynamics
$2.009
$1.989
$1.928
Corphita
$2.025
Component Stockers USA
$2.580
$1.740
$1.270
$1.130
Parana Technologies
$21.076
$21.329
DigiPath Technology Company
$23.207
$21.351
ChromeModa Solutions
$23.681
$19.418
IDEA Electronic Components Group
$22.497
$21.313
Lixinc
Infinite Electronics LLP (Excess)
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
GreenTree Electronics
Kepictronics
Metaverse IC Inc.
Alle Elektronik GmbH
Authorized Procurement Solutions
Speed Components Ltd (Excess)
Cyclops Electronics Ltd (Excess)
Assy Fe
Robosynatics
$5.321
Lucentia Tech
Computer Components Inc. - USA
ChipstoGo Electronic ltd
Analog Waveform Generation LMC555CM attributes and parameters. Explore more Analog Waveform Generation devices from National Semiconductor
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Frequency:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LMC555CM Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-594-6686, 5962015946686
NIIN
015946686
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
1552200168
Molex
WIRE AND CABLE;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
Silicon Transistor
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM122H/883
Teledyne E2v (Uk)
RECTANGULAR; Temperature Grade: MILITARY; No. of Terminals: 10; Package Shape: ROUND; Surface Mount: NO; Terminal Form: WIRE;
TDA4816
WAVEFORM GENERATION; Temperature Grade: OTHER; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
EF68A40CV
STMicroelectronics
STMicroelectronics EF68A40CV is a MOS analog waveform generator with 28 terminals, operating at -40 to 85 °C. It has a supply voltage of 5V and ceramic rectangular package suitable for industrial applications. With through-hole terminals and 2.54mm pitch, it's ideal for precise signal generation in various electronic systems.
NE556-1F
NXP Semiconductors
PULSE; Temperature Grade: COMMERCIAL; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ICM7555CN/01,112
PULSE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ICM7555ESA+
Maxim Integrated
SQUARE; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ICL8038AMJD
Intersil
ICL8038AMJD by Intersil is an analog waveform generation IC with +-5,+-15V power supplies. It has 14 terminals and operates in a temperature range of -55 to 125°C. This military-grade IC is commonly used for waveform generation applications.
EF6840C
STMicroelectronics EF6840C is a 28-terminal MOS analog waveform generator with 5V supply voltage. It operates b/w 0-70 °C, ideal for commercial applications requiring precise signal generation in ceramic package.
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
TLC556CD
TLC556CD by Texas Instruments is a dual-function analog waveform generator with a max output frequency of 1.2 GHz, suitable for applications requiring precise timing control. Operating at a nominal voltage of 5 V, this CMOS technology-based IC offers versatile functionality in a small outline package ideal for surface mount designs.
ICM7556MJD
TIMER; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
933975610623
PULSE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ICL8038CCJD
Harris Semiconductor
SQUARE; TRIANGULAR; SINE; SAWTOOTH; PULSE; Temperature Grade: COMMERCIAL; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SA555D
SQUARE; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
UPD5555G
Renesas Electronics
PULSE; RECTANGULAR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC1455DR2G
Onsemi
MC1455DR2G by Onsemi is an Analog Waveform Generation IC with 8 terminals and a supply voltage range of 4.5V to 16V. It operates in temperatures from 0°C to 70°C, making it suitable for commercial applications requiring pulse generation at a peak reflow temperature of 260°C. The small outline package with gull wing terminals and surface mount capability enhances its versatility in various electronic designs.
EF68A40EM
STMicroelectronics EF68A40EM is a MOS technology Analog Waveform Generation chip with 28 terminals, operating b/w -55 °C to 125°C. It has a supply voltage of 5V and comes in a square-shaped plastic/epoxy package suitable for military-grade applications.
TS3V556ID
STMicroelectronics' TS3V556ID is a 2-function analog waveform generator with a max output frequency of 2 GHz. Operating at temperatures from -40 to 125 °C, it's ideal for automotive applications. This CMOS technology IC has a supply voltage range of 2.7-16 V and comes in a small outline package.
LMC555M
LMC555M by Texas Instruments is an 8-terminal CMOS analog waveform generator with a supply voltage range of 1.5V to 12V. It operates b/w -40°C to 85°C, offering a max output frequency of 3GHz. Ideal for industrial applications requiring pulse generation in compact spaces due to its small outline package style.
LM122H/883C
LM122H/883C by National Semiconductor is a military-grade analog waveform generator with a temperature range of -55 to 125°C. It operates on power supplies ranging from 4.5V to 40V and has a cylindrical package style with 10 terminals. This device, made of metal, is suitable for various military applications requiring precise waveform generation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LMC555CMM
LMC555CMM by Texas Instruments is a CMOS analog waveform generator with a 3 GHz max output frequency and 8 terminals. It operates b/w -40 to 85 °C, suitable for industrial applications requiring pulse or rectangular waveforms. The package is small outline, thin profile, ideal for surface mount designs in various electronic systems.
PULSE; RECTANGULAR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LMC555CM
LMC555CM by Texas Instruments is a CMOS analog waveform generator with 8 terminals. It operates at a supply voltage range of 1.5V to 15V, producing output frequencies up to 3GHz. Ideal for industrial applications requiring precise timing and pulse generation in compact designs.
LMC555CMX/NOPB
LMC555CMX/NOPB by Texas Instruments is a CMOS analog waveform generator with 8 terminals. It operates b/w -40 to 85 °C, with Vsup ranging from 1.5V to 15V. Ideal for industrial applications, it has a max output frequency of 3 GHz and consumes only 0.4 mA at peak supply voltage.
LMC555CMX
LMC555CMX by Texas Instruments is a CMOS analog waveform generator with a supply voltage range of 1.5V to 15V and max output frequency of 3GHz. This IC, in a small outline package, operates b/w -40°C to 85°C making it suitable for industrial applications requiring precise pulse generation at high frequencies.
LMC555CMMX/NOPB
LMC555CMMX/NOPB by Texas Instruments is a CMOS analog waveform generator with a 3 GHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C and has a supply voltage range of 1.5-15 V. With a small outline package and dual terminals, it offers versatile usage in pulse and rectangular signal generation.
LMC555CMM/NOPB
LMC555CMM/NOPB by Texas Instruments is a CMOS analog waveform generator with a max output frequency of 3 GHz. It operates within an industrial temperature range of -40 to 85°C and has a nominal voltage of 5V. This IC, in a small outline package, is ideal for pulse and rectangular waveform generation in various electronic applications.
LMC555CMMX
LMC555CMMX by Texas Instruments is a CMOS analog waveform generator with a max output frequency of 3 GHz. Operating temperature ranges from -40 to 85 °C, suitable for industrial applications. With a small outline package and dual terminals, it's ideal for pulse and rectangular wave generation in various electronic devices.
LMC555CN
LMC555CN by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates b/w -40 to 85 °C, suitable for industrial applications. With a supply voltage range of 1.5V to 12V and max output frequency of 3 GHz, it is ideal for pulse generation in various electronic circuits.
PULSE; RECTANGULAR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LMC555CM/NOPB
LMC555CM/NOPB by Texas Instruments is a CMOS analog waveform generator with 5V supply voltage, 3 GHz output frequency, and -40 to 85°C operating temperature range. Ideal for industrial applications requiring pulse generation in a compact rectangular package.
LMC555CN/NOPB
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved