Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PULSE; RECTANGULAR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Median Price
$1.699
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.890
100+ parts
$0.845
1k+ parts
10k+ parts
-
Texas Instruments
$1.270
$0.977
$0.514
Chip1Stop
$1.640
$1.010
Arrow
$1.199
$0.951
$0.887
Newark
$1.720
$0.884
$0.852
Mouser Electronics
$1.770
$1.150
$1.040
DigiKey
$1.880
$1.206
$0.984
$0.929
Farnell
$1.890
$1.372
$1.333
Element14
$2.660
$1.570
$1.370
$1.310
Verical
Rochester
$1.000
$0.830
$0.740
Digiode
$0.678
Nova Conductors
TME
$1.610
$0.870
Vyrian
Semtec, LLC
Chip Stock
Anansix
Prism Electronics
Bristol Electronics
Atlantic Semiconductor
ACDS - Activité Composants Distribution Service
Carlin Systems, Inc.
PC Components Company LLC
North Shore Components
LittleDiode
Cyclops Electronics Ltd
Ampacity Inc.
$0.600
Semicontronic
$0.585
$0.582
Corphita
$0.643
Continental Prestige Electronics
$0.813
Argo Parts USA
Netroflash
$0.788
$0.772
Corohmni
$0.864
Advanced Electronics
Parana Technologies
$19.373
$19.388
DigiPath Technology Company
$21.332
$19.625
ChromeModa Solutions
$21.767
$17.849
IDEA Electronic Components Group
$20.679
$19.590
Perfect Parts
Lixinc
CPlus Electronics
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
A-Z Elektronik GmbH
Metaverse IC Inc.
Allen Electronics Distributors
$0.953
Glotronic Ltd.
Analog Waveform Generation LMC555CN/NOPB attributes and parameters. Explore more Analog Waveform Generation devices from National Semiconductor
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Frequency:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LMC555CN/NOPB Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Assembly Site 17/Dec/2021
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NE556J/P4
NE556J/P4 by Texas Instruments is a dual terminal analog waveform generator with 14 terminals. It operates at temperatures from 0 to 70°C and requires power supplies of 5/15V. This bipolar technology device in ceramic package is ideal for commercial applications requiring precise waveform generation.
NA555D
NA555D by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and operating temperature from -40°C to 105°C. It features a small outline package, dual terminals, and gull wing form factor making it ideal for industrial applications requiring pulse generation in compact spaces.
MIC1555YM5-TR
Microchip Technology
MIC1555YM5-TR by Microchip: 5V nominal supply, 5 GHz max output freq, -40 to 85°C temp range. Analog waveform gen for industrial applications with CMOS tech in small outline package.
M38510/10901BPX
M38510/10901BPX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating b/w -55 to 125 °C. It has a supply voltage range of 4.5V to 18V and a max current of 30mA. This military-grade IC in ceramic package is ideal for pulse generation applications.
ICM7555ID-T
ICM7555ID-T by NXP Semiconductors is a CMOS analog waveform generator with a max output frequency of 0.5 GHz and operates b/w -40 °C to 85 °C. It features an 8-terminal, dual-position design in a compact SO package. Ideal for industrial applications requiring precise pulse generation at supply voltages from 3V to 16V.
ICM7240IPE+
Maxim Integrated
PULSE; RECTANGULAR; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SAE0530
Infineon Technologies
Analog Waveform Generation Functions; Temperature Grade: OTHER; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
5962-89503022X
The Texas Instruments 5962-89503022X is a CMOS analog waveform generator with 2 functions, operating at up to 1.2 GHz. It is designed for military applications, featuring a package style of chip carrier and MIL-STD-883 screening level. The IC has a terminal pitch of 1.27 mm and operates within a temperature range of -55 to 125 °C.
NE566F
SQUARE; TRIANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TLC556CDG4
TLC556CDG4 by Texas Instruments is a dual-function analog waveform generator with a max output frequency of 1.2 GHz. It operates on a nominal voltage of 5 V and is suitable for applications requiring pulse and rectangular waveforms in commercial temperature grades.
ID82C54/+
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SE555CN
SQUARE; Temperature Grade: MILITARY; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ICM7556/W
Analog Devices
Analog Devices' ICM7556/W is a dual-function analog waveform generator with 8 terminals, operating from 2V to 16.5V at temperatures b/w 0 °C to 70°C. It can output up to 0.5 GHz frequency and is ideal for pulse generation in commercial applications.
5962-01-420-4926
The Texas Instruments 5962-01-420-4926 is an Analog Waveform Generation IC with a supply voltage of 5V. It features a square package shape, 60 terminals in a flatpack style, and operates b/w -20°C to 45°C. Ideal for applications requiring precise waveform generation in commercial-grade environments.
NE555D-T
NE555D-T by NXP Semiconductors is an Analog Waveform Generation IC with 8 terminals, operating voltage range of 4.5V to 16V, and temp range of 0-70°C. It's a versatile component for applications requiring precise timing control in commercial-grade electronics.
EF68A40J
STMicroelectronics EF68A40J is a MOS Analog Waveform Generator with 28 terminals, operating at 0-70 °C. It has a supply voltage of 5V and rectangular ceramic package shape. Ideal for commercial applications requiring precise waveform generation at 5V power supply.
TLC555CDBLE
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ICL8038BCJD
General Electric Solid State
WAVEFORM GENERATION; Temperature Grade: COMMERCIAL; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NE556NR
NE556NR by Texas Instruments is an Analog Waveform Generation IC with 14 terminals. It operates b/w 4.5V to 16V, suitable for commercial temperature grades. The package is rectangular in shape, made of plastic/epoxy material, and has a terminal finish of nickel palladium gold, ideal for pulse and rectangular wave applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LMC555CMM
LMC555CMM by Texas Instruments is a CMOS analog waveform generator with a 3 GHz max output frequency and 8 terminals. It operates b/w -40 to 85 °C, suitable for industrial applications requiring pulse or rectangular waveforms. The package is small outline, thin profile, ideal for surface mount designs in various electronic systems.
PULSE; RECTANGULAR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LMC555CM
LMC555CM by Texas Instruments is a CMOS analog waveform generator with 8 terminals. It operates at a supply voltage range of 1.5V to 15V, producing output frequencies up to 3GHz. Ideal for industrial applications requiring precise timing and pulse generation in compact designs.
PULSE; RECTANGULAR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMC555CMX/NOPB
LMC555CMX/NOPB by Texas Instruments is a CMOS analog waveform generator with 8 terminals. It operates b/w -40 to 85 °C, with Vsup ranging from 1.5V to 15V. Ideal for industrial applications, it has a max output frequency of 3 GHz and consumes only 0.4 mA at peak supply voltage.
LMC555CMX
LMC555CMX by Texas Instruments is a CMOS analog waveform generator with a supply voltage range of 1.5V to 15V and max output frequency of 3GHz. This IC, in a small outline package, operates b/w -40°C to 85°C making it suitable for industrial applications requiring precise pulse generation at high frequencies.
LMC555CMMX/NOPB
LMC555CMMX/NOPB by Texas Instruments is a CMOS analog waveform generator with a 3 GHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C and has a supply voltage range of 1.5-15 V. With a small outline package and dual terminals, it offers versatile usage in pulse and rectangular signal generation.
LMC555CMM/NOPB
LMC555CMM/NOPB by Texas Instruments is a CMOS analog waveform generator with a max output frequency of 3 GHz. It operates within an industrial temperature range of -40 to 85°C and has a nominal voltage of 5V. This IC, in a small outline package, is ideal for pulse and rectangular waveform generation in various electronic applications.
LMC555CMMX
LMC555CMMX by Texas Instruments is a CMOS analog waveform generator with a max output frequency of 3 GHz. Operating temperature ranges from -40 to 85 °C, suitable for industrial applications. With a small outline package and dual terminals, it's ideal for pulse and rectangular wave generation in various electronic devices.
LMC555CN
LMC555CN by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates b/w -40 to 85 °C, suitable for industrial applications. With a supply voltage range of 1.5V to 12V and max output frequency of 3 GHz, it is ideal for pulse generation in various electronic circuits.
LMC555CM/NOPB
LMC555CM/NOPB by Texas Instruments is a CMOS analog waveform generator with 5V supply voltage, 3 GHz output frequency, and -40 to 85°C operating temperature range. Ideal for industrial applications requiring pulse generation in a compact rectangular package.
LMC555CN/NOPB
LMC555J/883
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved