Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ECL TO TTL TRANSLATOR; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Anansix
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Vyrian
Corphita
Voltage Level Translators 100325DCQR attributes and parameters. Explore more Voltage Level Translators devices from National Semiconductor
Maximum Delay:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Output Latch/Register:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
100325DCQR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
Promax-johnton
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
Zetex Plc
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
MC100EPT26DR2
MC100EPT26DR2 by Onsemi is a voltage level translator with a supply voltage range of 3V to 3.6V, operating temperature from -40 °C to 85°C, and max delay of 2.2ns. It is ideal for PECL to TTL translation in industrial applications requiring precise signal conversion and fast response times.
MAX9374EKA+T
Analog Devices
MAX9374EKA+T by Analog Devices is a PECL to LVDS translator with 8 terminals. It operates b/w -40 to 85 °C, with supply voltage range of 2.375V to 2.625V. This small outline package is ideal for industrial applications requiring low profile voltage level translation.
SN65LVDS17DRFRG4
SN65LVDS17DRFRG4 by Texas Instruments is a voltage level translator with 2.5/3.3V power supplies, PECL to LVDS interface, and 0.63ns max delay. It is used in industrial applications for signal conversion b/w different logic levels, featuring a small outline package with dual terminals and nickel palladium gold finish.
SN74GTL2107PWR
SN74GTL2107PWR by Texas Instruments is a voltage level translator with 13 functions, operating at 3.3V. It features a small outline package style and is suitable for industrial applications requiring GTL to TTL transceiver interface ICs. With a max supply voltage of 3.6V and output polarity as TRUE, it offers fast response times with a max delay of 10ns.
CD4504BPWRG4
CD4504BPWRG4 by Texas Instruments is a voltage level translator with 6 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 5-18 V and offers true output polarity. Ideal for TTL/CMOS to CMOS translation in military-grade applications due to its compact size and high temperature tolerance.
MC100ELT25MNR4G
MC100ELT25MNR4G by Onsemi is a voltage level translator with 8 terminals, operating at -40 to 85 °C. It has a max supply voltage of 5.5 V and delay of 4.1 ns, suitable for ECL to TTL translation in industrial applications.
SN100KT5543NT
SN100KT5543NT by Texas Instruments is a voltage level translator with 8 functions, operating b/w -4.5V to 5.5V. It features TTL to ECL translation, 3-STATE output characteristics, and a max delay of 3.6ns. Ideal for commercial applications requiring precise signal conversion in compact spaces due to its small form factor and high-speed performance.
MC10125L
MC10125L by Onsemi is a voltage level translator with 4 functions, ECL10K technology, and TOTEM-POLE output. It operates at -30 to 85 °C and has a max delay of 6 ns. Ideal for ECL to TTL translation in electronic applications.
CD4504BF
CD4504BF by Texas Instruments is a voltage level translator with 6 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 3-18 V and max delay of 550 ns. Ideal for TTL/CMOS to CMOS translation in military-grade applications due to its compact size and high reliability.
SN10KHT5541NTE4
SN10KHT5541NTE4 by Texas Instruments is a voltage level translator with 8 functions, operating at supply voltages of 4.5V to 5.5V. It features an ECL to TTL interface, with a max delay of 6.2ns and operates in commercial extended temperature range. Ideal for applications requiring precise signal translation in compact designs.
MC100EPT24DTR2
MC100EPT24DTR2 by Onsemi is a voltage level translator with max supply voltage of 3.6V, min operating temp -40 °C, and delay of 0.8ns. It's used for translating LVTTL/LVCMOS to LVECL signals in industrial applications.
NB100LVEP91DWG
NB100LVEP91DWG by Onsemi is a voltage level translator with a supply voltage range of 2.375V to 3.8V, operating temperature from -40°C to 85°C, and max delay of 0.65ns. It is used as a PECL to ECL translator in industrial applications requiring high-speed signal conversion.
SN74GTL2006PWR
SN74GTL2006PWR by Texas Instruments is a voltage level translator with 13 functions, operating at 3.3V supply voltage and supporting GTL to TTL transceiver interface. It has a max delay of 10ns, operates in industrial temperature grade range (-40 to 85°C), and comes in a small outline package suitable for surface mount applications.
SY89328LMG-TR
Micrel
PECL-TTL/TTL-PECL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVQCCN; Package Shape: SQUARE;
SN10KHT5574DW
SN10KHT5574DW by Texas Instruments is a voltage level translator with 8 functions, operating at 4.5-5.5V. It features a small outline package style, Gull Wing terminal form, and ECL to TTL translation interface. Ideal for commercial applications requiring fast signal conversion with true output polarity in a compact design.
SY89322VMGTR
Microchip Technology
Microchip Technology's SY89322VMGTR is a voltage level translator with 2 functions, operating at 3-3.6V. It features a small outline package, dual terminals, and PECL interface type. Ideal for industrial applications requiring fast signal translation with low power consumption.
MC10H350M
MC10H350M by Onsemi is a voltage translator with 4 functions, operating at 5V. It features PECL to TTL translation, 5ns delay, and 3-STATE output. Widely used in commercial applications requiring ECL technology for signal conversion.
MC100EPT21DG
MC100EPT21DG by Onsemi is a voltage level translator with a max supply voltage of 3.6V and a min operating temperature of -40°C. It is commonly used as a PECL to TTL translator in industrial applications.
FXLA101L6X
FXLA101L6X by Onsemi is a voltage level translator with 1.2/3.3V power supplies, 6 terminals, and 8.5ns max delay. It is used for TTL/CMOS to CMOS translation in industrial applications due to its small outline package and wide operating temperature range of -40°C to 85°C.
SN10KHT5543DW
SN10KHT5543DW by Texas Instruments is a voltage level translator with 8 functions, operating at supply voltages of 4.5V to 5.5V. It features a small outline package style and Gull Wing terminal form, suitable for TTL to ECL translation applications in commercial temperature grades.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved