Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DLW5ATZ500MQ2L by Murata Mfg is a Data Line Filter with 50V rated voltage, 4A rated current, and 10 Mohm min insulation resistance. It has 2 functions and operates b/w -40 to 105 °C. Ideal for applications requiring noise suppression in automotive electronics.
Median Price
$1.022
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.590
100+ parts
$0.956
1k+ parts
$0.813
10k+ parts
$0.767
Chip1Stop
-
$0.454
$0.413
Chip Stock
Vyrian
Velocity Electronics
Nova Conductors
Corohmni
$0.709
AZTECH Wire
$18.960
Netroflash
iodParts Technologies Inc.
High insulation resistance ensures reliable performance and helps prevent malfunctions due to leakage currents.
Multiple functions allow for efficient filtering of data lines, reducing interference and improving signal clarity.
AEC-Q200 compliance ensures that the product meets automotive electronics quality standards, ideal for automotive applications.
Suitable for applications requiring a voltage rating of up to 50 V, providing flexibility in usage scenarios.
Having 4 terminals allows for secure and stable connections, enhancing overall product reliability.
Specifically designed as a data line filter, offering precise filtering capabilities for data transmission lines.
High maximum operating temperature ensures product reliability even under harsh operating conditions.
Low minimum operating temperature allows for use in a wide range of environments, suitable for various applications.
Compact width allows for space-saving installation, making it suitable for applications with limited space.
Low DC resistance helps minimize power loss and ensures efficient signal transmission through the filter.
Optimal length for convenient installation and integration into different electronic systems.
Output impedance of 50 ohms helps match impedance levels, reducing signal reflections and maintaining signal integrity.
Convenient packing method ensures safe transportation and storage of the product, reducing the risk of damage.
Surface mount design allows for easy and secure installation on circuit boards, ideal for modern electronic applications.
Rated current of 4 A allows for handling moderate power loads, making it suitable for various electronic devices.
Low height profile enables compact designs and easy integration into electronic systems with limited space.
Data Line Filters DLW5ATZ500MQ2L attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Maximum DC Resistance:
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Rated Current:
Rated Voltage:
Screening Level:
Width (mm):
DLW5ATZ500MQ2L Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
4554
Jw Miller Magnetics
Other Semiconductors;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Semitronics
NFM21PC105B1A3D
Murata Manufacturing
Murata Manufacturing's NFM21PC105B1A3D is a data line filter with 500 Mohm insulation resistance, 10V rated voltage, and 1000000uF capacitance. Ideal for applications requiring noise suppression in electronic circuits.
EMI8142MUTAG
EMI8142MUTAG by Onsemi is a data line filter with 10 terminals, operating b/w -40°C to 85°C. It has a power supply of 3.3V and features nickel palladium gold terminal finish. Ideal for applications requiring surface mount filters in plastic packages.
ACM2012-900-2P-T002
TDK's ACM2012-900-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.4A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics.
BLM18EG221SN1D
Murata Manufacturing's BLM18EG221SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.05 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 260 ohm at frequencies ranging from 100 MHz to 1000 MHz.
MMZ2012Y601BT000
MMZ2012Y601BT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.2 ohm and output impedance of 600 OHM, suitable for surface mount applications in electronics for noise suppression.
BLM15PD121SN1D
BLM15PD121SN1D by Murata is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.09 ohm, and output impedance of 120 ohm. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
BNX023-01L
Murata Manufacturing's BNX023-01L is a data line filter with 2 functions and 4 terminals. It offers 35 dB attenuation at 1000 MHz, rated for 100 V and 20 A. Ideal for applications requiring noise suppression in data lines, it operates b/w -40 to 125 °C.
BLM31SN500SN1L
Murata Manufacturing's BLM31SN500SN1L is a FERRITE CHIP filter with 2 terminals, rated for 10A current. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55 to 125 °C and has a max DC resistance of 0.0021 ohm. Ideal for data line filtering applications due to its 50 OHM output impedance and surface mounting type.
MMZ2012Y202B
The TDK MMZ2012Y202B is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, matte tin finish, and dimensions of L2.0xB1.25xH0.85 (mm). With a max operating temperature of 125°C and rated current of 0.4A, it is ideal for surface mount applications requiring an output impedance of 2000 ohm.
MPZ2012S101AT000
TDK's MPZ2012S101AT000 is an 0805 chip bead filter with 2 terminals, ideal for data line applications. With a max operating temp of 125°C and min freq of 100 MHz, it offers low DC resistance at 0.02 ohm. This ferrite chip filter has dimensions of L2.0xB1.25xH0.85 mm and rated current of 4A, suitable for surface mounting in various electronic devices.
742792716
Wuerth Elektronik & Kg
Wurth Elektronik 742792716 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temp of 125°C and min of -55°C. With dimensions of L1.0xB0.5xH0.5 (mm), it's ideal for surface mount applications requiring output impedance of 60 ohm and rated current of 0.3A.
SRF0905-251Y
Bourns
Bourns SRF0905-251Y is a data line filter with 2 functions, rated voltage of 50V, and inductance of 250uH. It operates b/w -40°C to 105°C, has a max DC resistance of 0.13 ohm, and output impedance of 600 ohm. Ideal for applications requiring surface mount filters with dimensions L9.2xB6.0xH5.0mm such as data communication systems.
BLM31PG601SN1D
BLM31PG601SN1D by Murata is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 600 OHM output impedance. Operating b/w -55 to 125 °C, it's ideal for data line filtering in surface mount applications due to its compact L3.2XB1.6XH1.1 (mm) dimensions and low DC resistance of 0.09 ohm.
BLM31PG121SN1L
Murata Manufacturing's BLM31PG121SN1L is a chip bead data line filter with 2 terminals, rated for 3A current. It offers 120 OHM output impedance, -55 to 125 °C operating temperature range, and 0.025 ohm DC resistance. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
NFM3DCC102R1H3L
Murata Manufacturing's NFM3DCC102R1H3L is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and FEED THROUGH CAPACITOR type. Ideal for applications requiring surface mount filters with dimensions of L3.2XB1.25XH0.7mm such as electronic devices or communication equipment.
74279228111
Wurth Elektronik 74279228111 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 4.1A current and 110 ohm output impedance. Operating b/w -55 to 125 °C, it's ideal for surface mount applications requiring noise suppression in electronic circuits.
BMB2A0060LN2
TE Connectivity
TE Connectivity's BMB2A0060LN2 is a 0805 multilayer chip data line filter with 2 terminals. Featuring ferrite chip construction, it offers 60 OHM output impedance and operates b/w -55 to 125 °C. Ideal for surface mount applications, this compact filter measures L2XB1.2XH.9 mm and is rated for 0.85 A current, making it suitable for noise suppression in high-frequency circuits up to 100 MHz.
NFA31CC102R1E4D
NFA31CC102R1E4D by Murata Manufacturing is a data line filter with 4 functions and a rated voltage of 25V. It has a capacitance of 1000uF and is commonly used in applications requiring noise suppression and EMI filtering.
BLM18AG601SH1D
Murata Manufacturing's BLM18AG601SH1D is an AEC-Q200 compliant chip bead filter with 2 terminals, ideal for data line applications. With a max operating temperature of 125°C and DC resistance of 0.38 ohm, it offers effective filtering at frequencies ranging from 100 MHz. This surface mount ferrite chip measures L1.6xB0.8xH0.8 (mm) and is suitable for use in automotive electronics due to its high output impedance of 600 OHM.
DLW43SH101XK2B
Murata Manufacturing's DLW43SH101XK2B is a FERRITE CHIP filter with 100uH inductance, 10 Mohm insulation resistance, and 2 ohm max DC resistance. It has 4 terminals, rated for 0.2A current at 50V. Ideal for automotive applications due to AEC-Q200 screening level.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DLW5BTM501SQ2L
DLW5BTM501SQ2L by Murata Mfg. is a Data Line Filter with 10 Mohm Min. Insulation Resistance, 50 V Rated Voltage, and 4 A Rated Current. It has 2 functions and operates b/w -40 to 85 °C, suitable for surface mount applications requiring impedance of 500 OHM in a compact size of L5.0XB5.0XH2.35 mm.
DLW5AHN402SQ2L
DATA LINE FILTER; Maximum DC Resistance: 3 ohm; Rated Current: .2 A; Additional Features: OPEN MAGNETIC ONE CIRCUIT TYPE; Dimensions: L5.0XB3.6XH4.3 (mm)/L0.197XB0.142XH0.169 (inch); Mounting Type: SURFACE MOUNT;
DLW5BTN101SQ2L
DLW5BTN101SQ2L by Murata Mfg: Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 6A Rated Current. Ideal for noise suppression in data lines due to its 100 OHM Output Impedance. Surface mount type suitable for various electronic applications.
DLW5BTM251SQ2L
Murata Manufacturing DLW5BTM251SQ2L is a Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 5A Rated Current. It has 2 functions and operates b/w -40°C to 85°C. Widely used in applications requiring filtering of data lines due to its low DC resistance and high output impedance of 250 ohms.
DLW5BSN302SQ2L
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Terminal Finish: Tin/Copper (Sn/Cu); Output Impedance (ohm): 3000 OHM; Maximum Operating Temperature: 85 Cel;
DLW5BTN102SQ2L
DATA LINE FILTER; Maximum DC Resistance: .024 ohm; Rated Current: 2 A; Minimum Insulation Resistance: 10 Mohm; No. of Functions: 2; No. of Terminals: 4;
DLW5BTN501SQ2L
DATA LINE FILTER; Maximum DC Resistance: .019 ohm; Rated Current: 4 A; Packing Method: TR, EMBOSSED, 7 INCH; Output Impedance (ohm): 500 OHM; Mounting Type: SURFACE MOUNT;
DLW5BTM102SQ2L
Murata Manufacturing DLW5BTM102SQ2L is a Data Line Filter with 2 functions, rated at 50V and 2A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 85 °C, and has a compact size of L5.0xB5.0xH2.35 mm. Ideal for applications requiring noise suppression in data lines.
DLW5BSN152SQ2L
DATA LINE FILTER; Maximum DC Resistance: .1 ohm; Rated Current: 1 A; Dimensions: L5.0XB5.0XH4.5 (mm)/L0.197XB0.197XH0.177 (inch); Output Impedance (ohm): 1500 OHM; JESD-609 Code: e2;
DLW5BTM142TQ2L
DLW5BTM142TQ2L by Murata is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. It has a min insulation resistance of 10 Mohm and output impedance of 1400 ohm. Ideal for applications requiring noise suppression in data lines.
DLW5BSM302SQ2L
Murata Manufacturing DLW5BSM302SQ2L is a Data Line Filter with 2 functions, rated at 50V and 0.5A. It offers high insulation resistance of 10 Mohm, suitable for applications requiring filtering in data lines with operating temperatures from -40 to 85°C.
DLW5BSN191SQ2L
DLW5BSN191SQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 50V and 5A. It has a min insulation resistance of 10 Mohm and operates b/w -40 to 85°C. Ideal for applications requiring noise suppression in data lines.
DLW5BTH501TQ2L
DATA LINE FILTER; Maximum DC Resistance: .027 ohm; Rated Current: 2.5 A; Length: 5 mm; No. of Functions: 2; Mounting Type: SURFACE MOUNT;
DLW5ATN272SQ2L
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: 1 A; Minimum Insulation Resistance: 10 Mohm; Packing Method: TAPE AND REEL; Height: 2.2 mm;
DLW5BTM142SQ2L
Murata Manufacturing's DLW5BTM142SQ2L is a Data Line Filter with 2 functions, rated at 50V and 1.5A. It offers high insulation resistance of 10 Mohm, low DC resistance of 0.04 ohm, and output impedance of 1400 ohm. Ideal for applications requiring noise suppression in data lines with surface mounting type.
DLW5BTM142TQ2B
DATA LINE FILTER; Maximum DC Resistance: .04 ohm; Rated Current: 2 A; Height: 2.35 mm; Output Impedance (ohm): 1400 OHM; Packing Method: BAG; BULK;
DLW5BTM142TQ2K
DATA LINE FILTER; Maximum DC Resistance: .04 ohm; Rated Current: 2 A; Minimum Operating Temperature: -40 Cel; Output Impedance (ohm): 1400 OHM; Rated Voltage: 50 V;
DLW5BSN351SQ2L
DLW5BSN351SQ2L by Murata Manufacturing is a data line filter with 2 functions and a rated voltage of 50V. It has a min insulation resistance of 10 Mohm and can operate at temperatures ranging from -40 to 85 °C. This surface mount filter is commonly used for noise suppression in data lines.
DLW5BSM191SQ2L
DATA LINE FILTER; Maximum DC Resistance: .02 ohm; Rated Current: 5 A; No. of Functions: 2; Minimum Operating Temperature: -40 Cel; Minimum Insulation Resistance: 10 Mohm;
DLW5BSM191SQ2K
DATA LINE FILTER; Maximum DC Resistance: .02 ohm; Rated Current: 5 A; No. of Functions: 2; Packing Method: TAPE; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved