Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing DLW5BSM191SQ2K is a Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 5A Rated Current. It has 2 functions and operates b/w -40 to 85 °C, suitable for surface mount applications requiring output impedance of 190 ohm.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Semicontronic
$0.400
$0.390
$0.388
Aztec Data Supply Inc.
$1.370
Corohmni
$2.902
AZTECH Wire
$13.385
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
High insulation resistance ensures reliable performance and reduces the risk of electrical shortages or malfunctions.
Having multiple functions allows for better filtration and protection of data lines, enhancing overall performance.
Suitable for a wide range of applications that require a 50V rated voltage, making it versatile and adaptable.
Having 4 terminals enables easy and secure connection, ensuring stability and efficiency in data transmission.
Specifically designed for data line filtering, providing effective suppression of electromagnetic interference for clear data transmission.
Capable of operating at high temperatures without compromising performance, suitable for demanding environments.
Can withstand low temperatures, making it suitable for use in a wide range of temperature conditions.
Compact design with a width of 5mm allows for space-saving installation in various electronic devices or systems.
Low DC resistance ensures minimal power loss and efficient filtering of data lines, optimizing performance.
With a length of 5mm, it is compact and suitable for applications where space is limited.
Provides a consistent output impedance of 190 ohms, ensuring stable signal transmission and data integrity.
Packaged in tape for easy handling and integration into production processes, increasing efficiency.
Surface mount design allows for convenient installation on circuit boards, saving time and effort in assembly.
Compact dimensions make it suitable for various electronic applications while offering versatility in installation.
With a rated current of 5A, it can handle high current loads without any issues, ensuring reliable performance.
Low profile design with a height of 4.5mm allows for easy integration into compact electronic devices or systems.
Data Line Filters DLW5BSM191SQ2K attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Maximum DC Resistance:
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
DLW5BSM191SQ2K Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Bourns
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Continental Device India
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
MPZ1608S101AT
TDK
TDK's MPZ1608S101AT is a 0603 chip bead filter with 2 terminals. It offers a max operating temp of 125°C and min freq of 100 MHz. Ideal for data line filtering, it has a DC resistance of 0.03 ohm and output impedance of 100 ohm, suitable for surface mount applications.
BK1608HS220-TV
Taiyo Yuden
BK1608HS220-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 22 OHM output impedance. Ideal for data line filtering applications due to its compact dimensions of L1.6xB0.8xH0.8 (mm) and surface mounting type.
ACM4520-231-2P-T000
ACM4520-231-2P-T000 by TDK is a Data Line Filter with 2 functions, rated at 50V and 2.6A. It offers a min insulation resistance of 10 Mohm, operating b/w -40 to 85 °C. Ideal for applications requiring effective filtering in compact spaces.
744232222
Wuerth Elektronik & Kg
Wurth Elektronik 744232222 is a Data Line Filter with 2 functions, rated at 50V. It has 4 terminals and operates b/w -40 to 125°C. With dimensions of L3.2xB1.6xH1.9 (mm), it offers an output impedance of 2200Ω and max DC resistance of 1.2Ω, suitable for surface mount applications in various electronic devices.
4400-076
Cts
4400-076 by Cts is a Data Line Filter with FEED THROUGH CAPACITOR type, rated at 200V and 10A. It offers a max insertion loss of 28dB, operating b/w -55°C to 125°C. Ideal for panel mounting applications due to its silver terminal finish and capacitance of 100uF.
744235801
Wurth Elektronik 744235801 is a Data Line Filter with 2 functions, AEC-Q200 screening. Rated for 60V, it has an inductance of 1.3uH and max DC resistance of 0.12 ohm. Ideal for applications requiring surface mount filters with dimensions D4.53.2XH2.8mm and rated current of 1A.
MPZ1005S121CT
The TDK MPZ1005S121CT is a chip bead data line filter with 2 terminals, rated for 1.2A current and 120 ohm output impedance. It operates b/w -40°C to 85°C, suitable for applications requiring noise suppression in circuits up to 100MHz frequency range. Dimensions: L1.0xB0.5xH0.5 (mm).
7116
Jw Miller Magnetics
DATA LINE FILTER; Maximum DC Resistance: .6 ohm; Dimensions: L10.16XB5.08XH8.89 (mm)/L0.4XB0.2XH0.35 (inch); Width (mm): 5.08; Height: 8.89 mm; Length: 10.16 mm;
PA3747.905NL
Pulse Electronics
PA3747.905NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. It operates b/w -40 to 125 °C and has an inductance of 6030 uH. Ideal for applications requiring high output impedance and rated current of 1.45 A.
EMIF06-MSD02N16
STMicroelectronics
STMicroelectronics' EMIF06-MSD02N16 is a 16-terminal data line filter with max temp of 85°C and min temp of -30°C. It features nickel palladium gold finish, surface mounting type, and compact dimensions (L3.55xB1.25xH0.55 mm). Ideal for applications requiring effective filtering in compact spaces.
MMZ1608R301ATD25
TDK MMZ1608R301ATD25 is a chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min of -55°C. Ideal for applications requiring a compact surface mount solution with an output impedance of 300 ohms.
BLM18AG121SN1D
Murata Manufacturing
Murata Manufacturing's BLM18AG121SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. It operates b/w -55°C to 125°C, has a DC resistance of 0.18 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
BLM18RK102SN1D
Murata Manufacturing's BLM18RK102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.8 ohm. Ideal for surface mount applications, this ferrite chip filter has an output impedance of 1000Ω and rated current of 0.2A.
BLA31BD601SN4D
Murata Manufacturing's BLA31BD601SN4D is a FERRITE CHIP filter with 4 functions and 8 terminals. With dimensions of L3.2XB1.6XH0.8 (mm), it has a max operating temperature of 125°C and min of -55°C. Ideal for data line filtering applications, it offers a max DC resistance of 0.45 ohm and output impedance of 600 OHM at a rated current of 0.1 A.
CM3440Z171R-10
Steward
DATA LINE FILTER; Maximum DC Resistance: .001 ohm; Rated Current: 20 A; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Packing Method: TAPE AND REEL;
744220
Wurth Elektronik 744220 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 4.7uH and max DC resistance of 0.75 ohm, it's ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0 (mm).
MI0805K601R-10
Laird Technologies
MI0805K601R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 600 OHM. Ideal for surface mount applications, it has a max DC resistance of 0.1 ohm and can handle a rated current of 1.5 A efficiently.
ILHB0603ER600V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2 A; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 60 OHM; Terminal Finish: Nickel (Ni);
742792023
Wurth Elektronik 742792023 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It has a width of 1.2mm, length of 2mm, and height of 0.9mm. With an output impedance of 120 ohm, it operates b/w -55 to 125 °C and supports frequencies from 100 MHz to 250 MHz.
MPZ2012S101ATD25
TDK's MPZ2012S101ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 4A current. With dimensions of L2.0xB1.25xH0.85 (mm), it operates b/w -55 to 125 °C and has a max DC resistance of 0.02 ohm. Ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DLW5BTM501SQ2L
DLW5BTM501SQ2L by Murata Mfg. is a Data Line Filter with 10 Mohm Min. Insulation Resistance, 50 V Rated Voltage, and 4 A Rated Current. It has 2 functions and operates b/w -40 to 85 °C, suitable for surface mount applications requiring impedance of 500 OHM in a compact size of L5.0XB5.0XH2.35 mm.
DLW5AHN402SQ2L
DATA LINE FILTER; Maximum DC Resistance: 3 ohm; Rated Current: .2 A; Additional Features: OPEN MAGNETIC ONE CIRCUIT TYPE; Dimensions: L5.0XB3.6XH4.3 (mm)/L0.197XB0.142XH0.169 (inch); Mounting Type: SURFACE MOUNT;
DLW5BTN101SQ2L
DLW5BTN101SQ2L by Murata Mfg: Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 6A Rated Current. Ideal for noise suppression in data lines due to its 100 OHM Output Impedance. Surface mount type suitable for various electronic applications.
DLW5BTM251SQ2L
Murata Manufacturing DLW5BTM251SQ2L is a Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 5A Rated Current. It has 2 functions and operates b/w -40°C to 85°C. Widely used in applications requiring filtering of data lines due to its low DC resistance and high output impedance of 250 ohms.
DLW5BSN302SQ2L
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Terminal Finish: Tin/Copper (Sn/Cu); Output Impedance (ohm): 3000 OHM; Maximum Operating Temperature: 85 Cel;
DLW5BTN102SQ2L
DATA LINE FILTER; Maximum DC Resistance: .024 ohm; Rated Current: 2 A; Minimum Insulation Resistance: 10 Mohm; No. of Functions: 2; No. of Terminals: 4;
DLW5BTN501SQ2L
DATA LINE FILTER; Maximum DC Resistance: .019 ohm; Rated Current: 4 A; Packing Method: TR, EMBOSSED, 7 INCH; Output Impedance (ohm): 500 OHM; Mounting Type: SURFACE MOUNT;
DLW5BTM102SQ2L
Murata Manufacturing DLW5BTM102SQ2L is a Data Line Filter with 2 functions, rated at 50V and 2A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 85 °C, and has a compact size of L5.0xB5.0xH2.35 mm. Ideal for applications requiring noise suppression in data lines.
DLW5BSN152SQ2L
DATA LINE FILTER; Maximum DC Resistance: .1 ohm; Rated Current: 1 A; Dimensions: L5.0XB5.0XH4.5 (mm)/L0.197XB0.197XH0.177 (inch); Output Impedance (ohm): 1500 OHM; JESD-609 Code: e2;
DLW5BTM142TQ2L
DLW5BTM142TQ2L by Murata is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. It has a min insulation resistance of 10 Mohm and output impedance of 1400 ohm. Ideal for applications requiring noise suppression in data lines.
DLW5BSM302SQ2L
Murata Manufacturing DLW5BSM302SQ2L is a Data Line Filter with 2 functions, rated at 50V and 0.5A. It offers high insulation resistance of 10 Mohm, suitable for applications requiring filtering in data lines with operating temperatures from -40 to 85°C.
DLW5BSN191SQ2L
DLW5BSN191SQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 50V and 5A. It has a min insulation resistance of 10 Mohm and operates b/w -40 to 85°C. Ideal for applications requiring noise suppression in data lines.
DLW5BTH501TQ2L
DATA LINE FILTER; Maximum DC Resistance: .027 ohm; Rated Current: 2.5 A; Length: 5 mm; No. of Functions: 2; Mounting Type: SURFACE MOUNT;
DLW5ATN272SQ2L
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: 1 A; Minimum Insulation Resistance: 10 Mohm; Packing Method: TAPE AND REEL; Height: 2.2 mm;
DLW5BTM142SQ2L
Murata Manufacturing's DLW5BTM142SQ2L is a Data Line Filter with 2 functions, rated at 50V and 1.5A. It offers high insulation resistance of 10 Mohm, low DC resistance of 0.04 ohm, and output impedance of 1400 ohm. Ideal for applications requiring noise suppression in data lines with surface mounting type.
DLW5BTM142TQ2B
DATA LINE FILTER; Maximum DC Resistance: .04 ohm; Rated Current: 2 A; Height: 2.35 mm; Output Impedance (ohm): 1400 OHM; Packing Method: BAG; BULK;
DLW5BTM142TQ2K
DATA LINE FILTER; Maximum DC Resistance: .04 ohm; Rated Current: 2 A; Minimum Operating Temperature: -40 Cel; Output Impedance (ohm): 1400 OHM; Rated Voltage: 50 V;
DLW5BSN351SQ2L
DLW5BSN351SQ2L by Murata Manufacturing is a data line filter with 2 functions and a rated voltage of 50V. It has a min insulation resistance of 10 Mohm and can operate at temperatures ranging from -40 to 85 °C. This surface mount filter is commonly used for noise suppression in data lines.
DLW5BSM191SQ2L
DATA LINE FILTER; Maximum DC Resistance: .02 ohm; Rated Current: 5 A; No. of Functions: 2; Minimum Operating Temperature: -40 Cel; Minimum Insulation Resistance: 10 Mohm;
DLW5BSM102SQ2B
DATA LINE FILTER; Maximum DC Resistance: .06 ohm; Rated Current: 1.5 A; Height: 4.5 mm; No. of Functions: 2; Rated Voltage: 50 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved