Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing DLW5BSM302SQ2L is a Data Line Filter with 2 functions, rated at 50V and 0.5A. It offers high insulation resistance of 10 Mohm, suitable for applications requiring filtering in data lines with operating temperatures from -40 to 85°C.
Median Price
$1.630
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
$1.100
1k+ parts
$0.781
10k+ parts
$0.736
DigiKey
$1.640
$1.109
$0.930
$0.795
Mouser Electronics
$1.110
$0.860
Newark
$1.990
$1.600
$1.440
-
Element14
$2.130
Arrow
$0.789
Verical
TTI Europe
$0.623
$0.598
TTI
$0.850
$0.800
Nova Conductors
$1.120
TME
$1.400
$0.863
$0.548
$0.489
Chip Stock
NAC Semi
$0.892
$0.823
Vyrian
Cyclops Electronics Ltd
IBS Electronics
$1.255
$1.241
Holdelec - ElecDif-Pro
ACDS - Activité Composants Distribution Service
Bristol Electronics
$0.956
ComSIT Distribution GmbH
Contempo Components LLC
Semicontronic
$0.412
$0.402
$0.400
Aztec Data Supply Inc.
$0.510
Argo Parts USA
Netroflash
$1.064
$1.042
Advanced Electronics
$1.576
$1.434
$1.292
Continental Prestige Electronics
$1.750
$0.790
$0.699
Corohmni
$1.874
Microchip USA
$14.370
$14.280
$14.230
$14.190
Eastek
$0.710
Perfect Parts
Kepictronics
A-Z Elektronik GmbH
Abacus Technologies
Authorized Procurement Solutions
GreenTree Electronics
Speed Components Ltd (Excess)
High insulation resistance ensures signal integrity and prevents leakage, making this data line filter reliable for use in sensitive electronic applications.
With two functions in one device, this data line filter provides better filtering capabilities, leading to improved performance in reducing noise and interference.
Suitable for applications with a rated voltage of up to 50V, ensuring safe and efficient operation of electronic devices.
Having four terminals allows for easy and secure connections, enhancing the reliability of the data line filter in various electronic setups.
Specifically designed for filtering data lines, this filter is optimized to effectively eliminate unwanted noise and interference in data transmission.
With a high maximum operating temperature, this data line filter can withstand elevated temperatures without compromising performance, ensuring long-term reliability.
Capable of operating in extremely low temperatures, this data line filter is suitable for a wide range of environments, including industrial and outdoor applications.
The tin copper finish on the terminals provides excellent conductivity and corrosion resistance, ensuring stable connections and prolonged durability.
The compact width of 5.0mm allows for space-saving installation, making this data line filter suitable for devices with limited space.
Low DC resistance results in minimal power loss and efficient signal transmission, enhancing the overall performance of the data line filter.
The length of 5mm makes this data line filter small and easy to integrate into electronic circuits without adding bulk or complexity.
With an output impedance of 3000 ohms, this data line filter effectively reduces noise and interference, improving signal quality in data transmission.
The tape packing method provides convenient storage and handling of the data line filter, facilitating easy and organized deployment during installation.
Designed for surface mounting, this data line filter offers simple and secure installation on PCBs, ensuring stability and reliability in electronic systems.
The compact dimensions of this data line filter make it versatile for various applications, providing flexibility in design and integration.
With a rated current of 0.5A, this data line filter can handle moderate current loads, suitable for many electronic devices and systems.
The height of 4.5mm allows for low-profile installation, making this data line filter suitable for compact devices and applications where space is limited.
Data Line Filters DLW5BSM302SQ2L attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Maximum DC Resistance:
Filter Type:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
DLW5BSM302SQ2L Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
Taiwan Semiconductor
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
IRLML6401TRPBF
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
ROHM
MPZ1608S121ATAH0
TDK
The TDK MPZ1608S121ATAH0 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 120 ohms and rated current of 2A, suitable for surface mount applications in various electronic devices.
CIM10U121NC
Samsung Electro-mechanics
Samsung Electro-mechanics CIM10U121NC is a chip bead data line filter with 2 terminals, rated for 0.5A current. With dimensions of L1.6XB0.8XH0.8 (mm), it operates b/w -55 to 125 °C and offers 120 OHM output impedance at 100 MHz frequency, making it ideal for surface mount applications in electronic devices.
BLM15PX331SN1D
Murata Manufacturing
Murata Manufacturing's BLM15PX331SN1D is a FERRITE CHIP data line filter with dimensions of L1.0xB0.5xH0.5 (mm). It offers a max DC resistance of 0.15 ohm and an output impedance of 330 ohm, suitable for surface mount applications in electronics to suppress electromagnetic interference efficiently.
BLM18HE601SN1D
Murata's BLM18HE601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.25 ohm and an output impedance of 600 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
ACP3225-102-2P
DATA LINE FILTER;
PA4339.101NLT
Pulse Electronics
PA4339.101NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 1.8uH and can handle up to 9A current. Ideal for applications requiring noise filtering in automotive electronics due to its compact size and high impedance output.
NUF2450MUT2G
Onsemi
NUF2450MUT2G by Onsemi is a Data Line Filter with 2 functions, 8 terminals, and inductance of 0.0023 uH. It operates b/w -40 to 85 °C and has a max DC resistance of 1.7 ohm. Ideal for applications requiring data line filtering in compact dimensions (L1.8XB1.2XH0.55 mm).
DLW43SH510XK2L
Murata Manufacturing DLW43SH510XK2L is a FERRITE CHIP data line filter with 51uH inductance, 10 Mohm insulation resistance, and AEC-Q200 screening. It has 4 terminals, rated for 50V voltage and 0.23A current. Ideal for automotive applications due to its compact size (L4.5xB3.2xH2.6 mm) and surface mounting type.
503-2
West Coast Magnetics
Data Line Filters;
BLM18PG471SN1B
Murata Manufacturing's BLM18PG471SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.2 ohm, output impedance of 470 OHM, and rated current of 1 A. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM18AG221SN1D
Murata's BLM18AG221SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 220 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of 1.6x0.8x0.8mm.
4400-099LF
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 10 A; Capacitance: 50000 uF; Rated Voltage: 50 V; Terminal Finish: Silver (Ag); Maximum Insertion Loss: 70 dB;
BLM18KG331SN1D
Murata Manufacturing's BLM18KG331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 0.08 ohm and output impedance of 330 OHM at 100 MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression.
BLM18EG101TN1D
Murata's BLM18EG101TN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. It offers a DC resistance of 0.045 ohm, output impedance of 140Ω, and rated current of 2A. Ideal for surface mount applications in filtering frequencies from 100MHz to 1000MHz.
SRF0905-472Y
Bourns SRF0905-472Y is a Data Line Filter with 2 functions, rated at 50V and inductance of 4700uH. It operates b/w -40 to 105°C, has a max DC resistance of 0.9 ohm, and output impedance of 4000 ohm. Ideal for applications requiring surface mount filters for data lines.
PS1240P02BT
The TDK PS1240P02BT is a Data Line Filter with max operating temp of 70°C and min operating temp of -20°C. It has a diameter of 12.2mm and height of 6.5mm, suitable for through hole mounting applications in various electronic devices.
MPZ2012S101A
The TDK MPZ2012S101A is an 0805 chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.02 ohm and output impedance of 100 ohm at 100 MHz. Ideal for surface mount applications, it provides effective filtering in electronic circuits requiring noise suppression.
BLM31PG601SN1B
Murata Manufacturing's BLM31PG601SN1B is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in the frequency range of 100 MHz.
SRF0905-100Y
Bourns SRF0905-100Y is a Data Line Filter with 2 functions, rated voltage of 50V, and inductance of 10uH. It operates b/w -40°C to 105°C, has a max DC resistance of 0.08 ohm, and output impedance of 200 ohm. Ideal for surface mount applications requiring filtering in data lines with a current rating of 1.6A.
51-750-309
Spectrum Control
DATA LINE FILTER; Rated Current: 10 A; Mounting Type: THROUGH HOLE MOUNT; Dimensions: D4.95XH6.32 (mm)/D0.195XH0.249 (inch); Rated Voltage: 70 V; Height: 6.32 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DLW5BTM501SQ2L
DLW5BTM501SQ2L by Murata Mfg. is a Data Line Filter with 10 Mohm Min. Insulation Resistance, 50 V Rated Voltage, and 4 A Rated Current. It has 2 functions and operates b/w -40 to 85 °C, suitable for surface mount applications requiring impedance of 500 OHM in a compact size of L5.0XB5.0XH2.35 mm.
DLW5AHN402SQ2L
DATA LINE FILTER; Maximum DC Resistance: 3 ohm; Rated Current: .2 A; Additional Features: OPEN MAGNETIC ONE CIRCUIT TYPE; Dimensions: L5.0XB3.6XH4.3 (mm)/L0.197XB0.142XH0.169 (inch); Mounting Type: SURFACE MOUNT;
DLW5BTN101SQ2L
DLW5BTN101SQ2L by Murata Mfg: Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 6A Rated Current. Ideal for noise suppression in data lines due to its 100 OHM Output Impedance. Surface mount type suitable for various electronic applications.
DLW5BTM251SQ2L
Murata Manufacturing DLW5BTM251SQ2L is a Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 5A Rated Current. It has 2 functions and operates b/w -40°C to 85°C. Widely used in applications requiring filtering of data lines due to its low DC resistance and high output impedance of 250 ohms.
DLW5BSN302SQ2L
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Terminal Finish: Tin/Copper (Sn/Cu); Output Impedance (ohm): 3000 OHM; Maximum Operating Temperature: 85 Cel;
DLW5BTN102SQ2L
DATA LINE FILTER; Maximum DC Resistance: .024 ohm; Rated Current: 2 A; Minimum Insulation Resistance: 10 Mohm; No. of Functions: 2; No. of Terminals: 4;
DLW5BTN501SQ2L
DATA LINE FILTER; Maximum DC Resistance: .019 ohm; Rated Current: 4 A; Packing Method: TR, EMBOSSED, 7 INCH; Output Impedance (ohm): 500 OHM; Mounting Type: SURFACE MOUNT;
DLW5BTM102SQ2L
Murata Manufacturing DLW5BTM102SQ2L is a Data Line Filter with 2 functions, rated at 50V and 2A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 85 °C, and has a compact size of L5.0xB5.0xH2.35 mm. Ideal for applications requiring noise suppression in data lines.
DLW5BSN152SQ2L
DATA LINE FILTER; Maximum DC Resistance: .1 ohm; Rated Current: 1 A; Dimensions: L5.0XB5.0XH4.5 (mm)/L0.197XB0.197XH0.177 (inch); Output Impedance (ohm): 1500 OHM; JESD-609 Code: e2;
DLW5BTM142TQ2L
DLW5BTM142TQ2L by Murata is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. It has a min insulation resistance of 10 Mohm and output impedance of 1400 ohm. Ideal for applications requiring noise suppression in data lines.
DLW5BSN191SQ2L
DLW5BSN191SQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 50V and 5A. It has a min insulation resistance of 10 Mohm and operates b/w -40 to 85°C. Ideal for applications requiring noise suppression in data lines.
DLW5BTH501TQ2L
DATA LINE FILTER; Maximum DC Resistance: .027 ohm; Rated Current: 2.5 A; Length: 5 mm; No. of Functions: 2; Mounting Type: SURFACE MOUNT;
DLW5ATN272SQ2L
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: 1 A; Minimum Insulation Resistance: 10 Mohm; Packing Method: TAPE AND REEL; Height: 2.2 mm;
DLW5BTM142SQ2L
Murata Manufacturing's DLW5BTM142SQ2L is a Data Line Filter with 2 functions, rated at 50V and 1.5A. It offers high insulation resistance of 10 Mohm, low DC resistance of 0.04 ohm, and output impedance of 1400 ohm. Ideal for applications requiring noise suppression in data lines with surface mounting type.
DLW5BTM142TQ2B
DATA LINE FILTER; Maximum DC Resistance: .04 ohm; Rated Current: 2 A; Height: 2.35 mm; Output Impedance (ohm): 1400 OHM; Packing Method: BAG; BULK;
DLW5BTM142TQ2K
DATA LINE FILTER; Maximum DC Resistance: .04 ohm; Rated Current: 2 A; Minimum Operating Temperature: -40 Cel; Output Impedance (ohm): 1400 OHM; Rated Voltage: 50 V;
DLW5BSN351SQ2L
DLW5BSN351SQ2L by Murata Manufacturing is a data line filter with 2 functions and a rated voltage of 50V. It has a min insulation resistance of 10 Mohm and can operate at temperatures ranging from -40 to 85 °C. This surface mount filter is commonly used for noise suppression in data lines.
DLW5BSM191SQ2L
DATA LINE FILTER; Maximum DC Resistance: .02 ohm; Rated Current: 5 A; No. of Functions: 2; Minimum Operating Temperature: -40 Cel; Minimum Insulation Resistance: 10 Mohm;
DLW5BSM191SQ2K
DATA LINE FILTER; Maximum DC Resistance: .02 ohm; Rated Current: 5 A; No. of Functions: 2; Packing Method: TAPE; Minimum Operating Temperature: -40 Cel;
DLW5BSM302SQ2B
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Width (mm): 5.0; No. of Terminals: 4; Output Impedance (ohm): 3000 OHM;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved