Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's DLW5BSM191SQ2L is a Data Line Filter with 2 functions, rated at 50V and 5A. It offers a max operating temperature of 85°C and insulation resistance of 10 Mohm. Ideal for applications requiring noise suppression in data lines.
Median Price
$1.650
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.600
100+ parts
$1.080
1k+ parts
$0.851
10k+ parts
$0.702
Farnell
-
Mouser Electronics
$1.660
$1.120
$0.860
$0.811
DigiKey
Element14
$1.930
Newark
$1.980
$1.400
$1.220
TTI
$0.880
$0.810
Verical
$1.098
$0.935
Future Electronics
$1.610
$1.590
Nova Conductors
$1.110
TME
$1.380
$0.914
$0.684
$0.572
Bristol Electronics
$1.800
$1.116
$0.900
Maritex
$2.116
Chip Stock
Vyrian
IBS Electronics
$1.255
$1.241
ACDS - Activité Composants Distribution Service
NAC Semi
$1.520
Cyclops Electronics Ltd
ComSIT Distribution GmbH
Prism Electronics
Semicontronic
$0.487
$0.475
$0.472
Corohmni
$0.969
Argo Parts USA
$1.016
Netroflash
Advanced Electronics
$1.169
$1.064
$0.959
Continental Prestige Electronics
$0.886
$0.748
Aztec Data Supply Inc.
$2.560
Microchip USA
$14.370
$14.280
$14.230
$14.190
Eastek
$0.710
Kepictronics
Abacus Technologies
A-Z Elektronik GmbH
GreenTree Electronics
Authorized Procurement Solutions
Glotronic Ltd.
iodParts Technologies Inc.
Perfect Parts
High insulation resistance ensures a reliable and safe operation of the data line filter.
Having 2 functions allows for better filtering and protection of the data lines.
Suitable for filtering data lines with voltage up to 50V, making it versatile for various applications.
Having 4 terminals provides a secure connection for the data lines.
Specifically designed for filtering data lines, ensuring optimal performance.
Can withstand high temperatures, making it suitable for a wide range of operating conditions.
Can operate in low temperatures, ensuring reliability in various environments.
Tin copper finish on terminals provides good conductivity and corrosion resistance.
Compact width allows for space-saving installation.
Low DC resistance ensures minimal power loss and efficient filtering.
Optimal length for efficient filtering of data lines.
Output impedance is within the acceptable range for effective filtering.
Convenient tape packing for easy handling and storage.
Surface mount design allows for easy and secure installation on circuit boards.
Compact dimensions make it suitable for various applications with space constraints.
Rated for up to 5A current, providing ample capacity for data line filtering.
Low height allows for easy integration into compact electronic devices.
Data Line Filters DLW5BSM191SQ2L attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Maximum DC Resistance:
Filter Type:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
DLW5BSM191SQ2L Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rochester Electronics
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Hy Electronic
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
BLM21PG331SN1J
Murata Manufacturing
BLM21PG331SN1J by Murata Manufacturing is a chip bead data line filter with 2 terminals and an 0805 case code. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications to provide impedance of 330 OHM at a rated current of 1 A.
EMI9408MUTAG
EMI9408MUTAG by Onsemi is a data line filter with 8 functions and 16 terminals. It offers an inductance of 0.07uH, capacitance of 24uF, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a temperature range from -40 to 85°C.
NUF2450MUT2G
NUF2450MUT2G by Onsemi is a Data Line Filter with 2 functions, 8 terminals, and inductance of 0.0023 uH. It operates b/w -40 to 85 °C and has a max DC resistance of 1.7 ohm. Ideal for applications requiring data line filtering in compact dimensions (L1.8XB1.2XH0.55 mm).
744229
Wuerth Elektronik & Kg
Wurth Elektronik 744229 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 6.5uH. It operates b/w -40 to 125°C, has a max DC resistance of 0.95 ohm, and output impedance of 18400 ohm. This surface mount filter is ideal for applications requiring noise suppression in data lines.
BLM41PG181SN1L
BLM41PG181SN1L by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers 180 OHM output impedance, 0.025 ohm DC resistance, and supports frequencies from 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression.
742792510
Wurth Elektronik 742792510 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with a frequency range of 100-1000 MHz and DC resistance of 0.03 ohm. This surface mount component has dimensions L4.5xB3.2xH1.5 mm and rated current of 6A, ideal for noise suppression in electronic circuits.
ACM1513-551-2PL-TLHF
TDK
ACM1513-551-2PL-TLHF by TDK is a Data Line Filter with 10A rated current, 50V rated voltage, and 550 ohm output impedance. It has 2 functions and operates b/w -40°C to 85°C. Ideal for applications requiring noise filtering in data lines.
MMZ2012Y202BT
The TDK MMZ2012Y202BT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.5 ohm and output impedance of 2000 ohm, making it ideal for surface mount applications requiring effective filtering in electronic circuits.
BLM21PG600SN1
Murata Manufacturing's BLM21PG600SN1 is a FERRITE CHIP data line filter with dimensions 2x1.25x0.85mm, rated current of 3A, and output impedance of 60 ohm. It operates b/w -55 to 125°C, has a max DC resistance of 0.025 ohm, and is designed for surface mount applications in electronic devices.
744822120
The Wurth Elektronik 744822120 Data Line Filter has a rated voltage of 250V, inductance of 20000uH, and max operating temperature of 125°C. It is UL approved with 2 functions and suitable for applications requiring noise suppression in data lines.
ILHB0603RK600V
Vishay Intertechnology's ILHB0603RK600V is a FERRITE CHIP filter with 2 terminals, 60 OHM output impedance, and 2A rated current. Operating b/w -55°C to 125°C, it has a max DC resistance of 0.1 ohm. Ideal for data line filtering in compact surface mount applications.
EMI5204MUTAG
EMI5204MUTAG by Onsemi is a data line filter with 4 functions and 8 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This surface mount filter is suitable for applications requiring a capacitance of 14 uF and an output impedance of 50 ohm.
BLM15BD121SN1D
Murata Manufacturing's BLM15BD121SN1D is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.3 ohm, and an output impedance of 120 ohm at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression on data lines.
RB6122-50-0M3
Schaffner Holding Ag
RB6122-50-0M3 by Schaffner Holding Ag is a UL-approved data line filter with 600V rated voltage and 50A rated current. Featuring inductance of 250uH, it operates b/w -40°C to 125°C. Ideal for applications requiring noise suppression in data lines, it measures L61.0xB57.8xH38.0mm and has a max DC resistance of 0.0009 ohm.
HI1206T500R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
74270055
Wurth Elektronik 74270055 is a FERRITE BEAD Data Line Filter with 225 OHM Output Impedance. Operating temperatures range from -25 to 125 °C, suitable for noise suppression in electronic circuits. Featuring a diameter of 18.6mm and stud mount design, it's ideal for applications requiring effective filtering and impedance matching.
PEMI2STD/HT,115
NXP Semiconductors' PEMI2STD/HT,115 is a 5-terminal DATA LINE FILTER with -40 to 85°C operating range. It is surface mountable and made of plastic. Ideal for applications requiring data line filtering in electronic devices.
HI1206T161R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .018 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
7448261418
Wurth Elektronik 7448261418 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 1800uH. It operates b/w -40 to 125°C, has a max DC resistance of 0.0079 ohm, and can handle up to 14A current. Ideal for applications requiring noise suppression in data lines.
BLM18HE152SN1D
BLM18HE152SN1D by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. It offers a DC resistance of 0.5 ohm, output impedance of 1500 ohm, and rated current of 0.4 A. Ideal for applications requiring surface mount filters in the frequency range of 100-1000 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DLW5BTM501SQ2L
DLW5BTM501SQ2L by Murata Mfg. is a Data Line Filter with 10 Mohm Min. Insulation Resistance, 50 V Rated Voltage, and 4 A Rated Current. It has 2 functions and operates b/w -40 to 85 °C, suitable for surface mount applications requiring impedance of 500 OHM in a compact size of L5.0XB5.0XH2.35 mm.
DLW5AHN402SQ2L
DATA LINE FILTER; Maximum DC Resistance: 3 ohm; Rated Current: .2 A; Additional Features: OPEN MAGNETIC ONE CIRCUIT TYPE; Dimensions: L5.0XB3.6XH4.3 (mm)/L0.197XB0.142XH0.169 (inch); Mounting Type: SURFACE MOUNT;
DLW5BTN101SQ2L
DLW5BTN101SQ2L by Murata Mfg: Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 6A Rated Current. Ideal for noise suppression in data lines due to its 100 OHM Output Impedance. Surface mount type suitable for various electronic applications.
DLW5BTM251SQ2L
Murata Manufacturing DLW5BTM251SQ2L is a Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 5A Rated Current. It has 2 functions and operates b/w -40°C to 85°C. Widely used in applications requiring filtering of data lines due to its low DC resistance and high output impedance of 250 ohms.
DLW5BSN302SQ2L
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Terminal Finish: Tin/Copper (Sn/Cu); Output Impedance (ohm): 3000 OHM; Maximum Operating Temperature: 85 Cel;
DLW5BTN102SQ2L
DATA LINE FILTER; Maximum DC Resistance: .024 ohm; Rated Current: 2 A; Minimum Insulation Resistance: 10 Mohm; No. of Functions: 2; No. of Terminals: 4;
DLW5BTN501SQ2L
DATA LINE FILTER; Maximum DC Resistance: .019 ohm; Rated Current: 4 A; Packing Method: TR, EMBOSSED, 7 INCH; Output Impedance (ohm): 500 OHM; Mounting Type: SURFACE MOUNT;
DLW5BTM102SQ2L
Murata Manufacturing DLW5BTM102SQ2L is a Data Line Filter with 2 functions, rated at 50V and 2A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 85 °C, and has a compact size of L5.0xB5.0xH2.35 mm. Ideal for applications requiring noise suppression in data lines.
DLW5BSN152SQ2L
DATA LINE FILTER; Maximum DC Resistance: .1 ohm; Rated Current: 1 A; Dimensions: L5.0XB5.0XH4.5 (mm)/L0.197XB0.197XH0.177 (inch); Output Impedance (ohm): 1500 OHM; JESD-609 Code: e2;
DLW5BTM142TQ2L
DLW5BTM142TQ2L by Murata is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. It has a min insulation resistance of 10 Mohm and output impedance of 1400 ohm. Ideal for applications requiring noise suppression in data lines.
DLW5BSM302SQ2L
Murata Manufacturing DLW5BSM302SQ2L is a Data Line Filter with 2 functions, rated at 50V and 0.5A. It offers high insulation resistance of 10 Mohm, suitable for applications requiring filtering in data lines with operating temperatures from -40 to 85°C.
DLW5BSN191SQ2L
DLW5BSN191SQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 50V and 5A. It has a min insulation resistance of 10 Mohm and operates b/w -40 to 85°C. Ideal for applications requiring noise suppression in data lines.
DLW5BTH501TQ2L
DATA LINE FILTER; Maximum DC Resistance: .027 ohm; Rated Current: 2.5 A; Length: 5 mm; No. of Functions: 2; Mounting Type: SURFACE MOUNT;
DLW5ATN272SQ2L
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: 1 A; Minimum Insulation Resistance: 10 Mohm; Packing Method: TAPE AND REEL; Height: 2.2 mm;
DLW5BTM142SQ2L
Murata Manufacturing's DLW5BTM142SQ2L is a Data Line Filter with 2 functions, rated at 50V and 1.5A. It offers high insulation resistance of 10 Mohm, low DC resistance of 0.04 ohm, and output impedance of 1400 ohm. Ideal for applications requiring noise suppression in data lines with surface mounting type.
DLW5BTM142TQ2B
DATA LINE FILTER; Maximum DC Resistance: .04 ohm; Rated Current: 2 A; Height: 2.35 mm; Output Impedance (ohm): 1400 OHM; Packing Method: BAG; BULK;
DLW5BTM142TQ2K
DATA LINE FILTER; Maximum DC Resistance: .04 ohm; Rated Current: 2 A; Minimum Operating Temperature: -40 Cel; Output Impedance (ohm): 1400 OHM; Rated Voltage: 50 V;
DLW5BSN351SQ2L
DLW5BSN351SQ2L by Murata Manufacturing is a data line filter with 2 functions and a rated voltage of 50V. It has a min insulation resistance of 10 Mohm and can operate at temperatures ranging from -40 to 85 °C. This surface mount filter is commonly used for noise suppression in data lines.
DLW5BSM191SQ2K
DATA LINE FILTER; Maximum DC Resistance: .02 ohm; Rated Current: 5 A; No. of Functions: 2; Packing Method: TAPE; Minimum Operating Temperature: -40 Cel;
DLW5BSM102SQ2B
DATA LINE FILTER; Maximum DC Resistance: .06 ohm; Rated Current: 1.5 A; Height: 4.5 mm; No. of Functions: 2; Rated Voltage: 50 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved