Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 744233121 is a Data Line Filter with 2 functions, rated at 50V. It has a max operating temperature of 125°C and min of -40°C. Ideal for applications requiring a DC resistance of 0.3 ohm, output impedance of 120 OHM, and rated current of 0.28 A.
Median Price
$1.460
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.230
1k+ parts
$0.980
10k+ parts
$0.485
Mouser Electronics
-
Distrelec
$1.587
$1.239
$1.130
Newark
$1.670
$1.440
$1.400
Farnell
$0.947
$0.753
$0.560
Chip1Stop
Nova Conductors
$0.989
Chip Stock
VNN
Vyrian
ComSIT Distribution GmbH
Prism Electronics
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Ampacity Inc.
$0.326
Semicontronic
$0.318
$0.316
Argo Parts USA
Netroflash
$0.940
$0.920
Continental Prestige Electronics
$1.190
$0.992
$0.802
$0.785
Aztec Data Supply Inc.
$1.325
Corohmni
$2.277
GlobX GmbH
Perfect Parts
Authorized Procurement Solutions
Kepictronics
This product is IEC approved for reliable use with a rated voltage of 50 V.
Provides dual functionality for effective data line filtering.
Suitable for use with devices requiring a rated voltage of 50 V.
Offers four terminals for easy connectivity and installation.
Specifically designed for data line filtering applications.
Can operate efficiently in high temperature environments up to 125°C.
Ideal for use in cold settings down to -40°C.
Tin finish provides corrosion resistance and reliable electrical contacts.
Compact width of 1.2 mm facilitates space-saving installations.
Low resistance ensures minimal power loss and efficient operation.
Compact length of 2 mm makes it suitable for various applications.
Offers a high output impedance of 120 ohms for effective signal filtering.
Convenient tape and reel packaging for easy handling and storage.
Surface mount design enables simple and secure installation.
Compact dimensions of 2.0x1.2x1.2 mm (0.079x0.047x0.047 inch) for versatile use.
Rated current of 0.28 A makes it suitable for devices with low power requirements.
Low profile height of 1.2 mm ensures compatibility with compact designs.
Data Line Filters 744233121 attributes and parameters. Explore more Data Line Filters devices from Wurth Elektronik
Approvals (V):
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
744233121 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
General Transistor
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Bkc Semiconductors
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148WS
Meritek Electronics
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
CM1422-03CP
CM1422-03CP by Onsemi is a data line filter with 8 functions and 20 terminals. It has a max operating temperature of 85°C and min of -40°C. With dimensions of L4.0XB1.46XH0.65 (mm), it is ideal for applications requiring high capacitance filtering in compact spaces.
BLM31PG601SN1B
Murata Manufacturing
Murata Manufacturing's BLM31PG601SN1B is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in the frequency range of 100 MHz.
BLM15AX100SN1D
BLM15AX100SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 1.74A, and max operating temp of 125°C. It has a ferrite chip construction, DC resistance of 0.015 ohm, and output impedance of 10 ohm. Ideal for surface mount applications in electronics to suppress noise interference at frequencies ranging from 100 MHz.
BLM31PG330SN1L
Murata Manufacturing's BLM31PG330SN1L is a chip bead data line filter with 2 terminals, rated for 6A current. With dimensions of L3.2xB1.6xH1.1 mm, it offers an output impedance of 33 ohm and operates b/w -55 to 125°C. Ideal for surface mount applications in filtering frequencies from 100 MHz with a max DC resistance of 0.01 ohm.
ACM70V-701-2PL-TL00
ACM70V-701-2PL-TL00 by TDK is a data line filter with 2 functions and a rated voltage of 80V. It has a min insulation resistance of 10 Mohm and is suitable for applications requiring AEC-Q200 compliance.
DLW5AHN402SQ2L
Murata Manufacturing's DLW5AHN402SQ2L is a data line filter with 2 functions, rated at 50V and 0.2A. With dimensions of L5.0xB3.6xH4.3 (mm), it operates b/w -25°C to 85°C, offering max DC resistance of 3 ohm and output impedance of 4000 ohm. Ideal for surface mount applications requiring high insulation resistance up to 10 Mohm.
74279224551
Wuerth Elektronik & Kg
Wurth Elektronik 74279224551 is a FERRITE CHIP data line filter with 2 terminals. It operates b/w -55 to 125 °C, has a DC resistance of 0.035 ohm, and an output impedance of 550 OHM. Ideal for surface mount applications, it measures L5.59xB5.08xH1.8 mm and can handle a rated current of 4 A.
FBMJ2125HS420-T8
Taiyo Yuden
Taiyo Yuden's FBMJ2125HS420-T8 is a Ferrite Chip Data Line Filter with 2 terminals, 125°C max temp, -40°C min temp. It has 1.25mm width, 2mm length, and 0.008 ohm DC resistance. With an output impedance of 42Ω and rated current of 4A, it's ideal for surface mount applications in electronics to reduce electromagnetic interference.
BLM31PG601SN1K
BLM31PG601SN1K by Murata is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in circuits up to 100MHz frequency range. This ferrite chip filter comes in a compact 1206 case size for surface mounting method.
BLM18KG700TN1D
Murata Manufacturing's BLM18KG700TN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With a max DC resistance of 0.022 ohm and output impedance of 70 ohm, it is ideal for applications requiring filtering at frequencies up to 100 MHz. This surface mount ferrite chip filter has dimensions of L1.6xB0.8xH0.6 mm and can handle a rated current of 3.5 A.
CIM10U121NC
Samsung Electro-mechanics
Samsung Electro-mechanics CIM10U121NC is a chip bead data line filter with 2 terminals, rated for 0.5A current. With dimensions of L1.6XB0.8XH0.8 (mm), it operates b/w -55 to 125 °C and offers 120 OHM output impedance at 100 MHz frequency, making it ideal for surface mount applications in electronic devices.
BLM21BB750SN1D
Murata Manufacturing's BLM21BB750SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a DC resistance of 0.16 ohm and output impedance of 75 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
BLM21AG221SN1D
Murata Manufacturing's BLM21AG221SN1D is an 0805 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering, this ferrite chip has a DC resistance of 0.13 ohm and output impedance of 220 ohm.
MMZ1608B121CTAH0
The TDK MMZ1608B121CTAH0 is a chip bead data line filter with 1 function, FERRITE CHIP construction, and 2 terminals. It operates b/w -55°C to 125°C, has a max DC resistance of 0.15 ohm, and an output impedance of 120 OHM. Ideal for surface mount applications in electronics for noise suppression and signal filtering.
BLM21BB331SN1D
Murata's BLM21BB331SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a DC resistance of 0.33 ohm, it offers a max frequency of 100 MHz and output impedance of 330 OHM. Ideal for data line filtering applications due to its compact size and surface mounting type.
BLM18BB100SN1D
Murata's BLM18BB100SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.1 ohm. Ideal for surface mount applications, it provides an output impedance of 10Ω, making it suitable for noise suppression in electronic circuits.
FBMJ4516HS111-T
FBMJ4516HS111-T by Taiyo Yuden is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 85°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.
ACM9070-701-2PL-TL01
ACM9070-701-2PL-TL01 by TDK is a FERRITE CHIP data line filter with 2 functions, rated voltage of 80V, and 10 Mohm min insulation resistance. It operates b/w -40 to 85 °C, has 4 terminals, and dimensions of L9.0XB7.0XH4.5 mm. Ideal for applications requiring high impedance filtering in compact spaces.
NFM18CC101R1C3D
Murata Manufacturing's NFM18CC101R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 100uF capacitance. Ideal for applications requiring FEED THROUGH CAPACITOR filters in surface mount configurations.
MMZ1608B601CTAH0
The TDK MMZ1608B601CTAH0 is a 0603 chip bead data line filter with 2 terminals. It features a max operating temperature of 125°C, DC resistance of 0.4 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
744232090
Wurth Elektronik
Wurth Elektronik 744232090 Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 125°C. Ideal for applications requiring surface mount filters with dimensions L3.2xB1.6xH1.9mm in tape and reel packaging.
744242220
Wurth Elektronik 744242220 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 22uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.23 ohm. Ideal for applications requiring filtering on data lines with UL approval.
744231091
Wurth Elektronik 744231091 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has 4 terminals, tin finish, and dimensions of L2.0xB1.2xH1.2 (mm). Ideal for applications requiring filtering in data lines with a current rating of 0.37A.
744227S
744227S by Wurth Elektronik is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.16 ohm, and output impedance of 5500 ohm. Ideal for surface mount applications requiring a compact L9.2xB6.0xH5.0mm size and rated current of 1A.
744222
Wurth Elektronik 744222 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 1000uH and max DC resistance of 0.31 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0mm, such as electronic devices needing noise suppression on data lines.
744230900
Wurth Elektronik 744230900 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. Ideal for surface mount applications, it has dimensions of L1.6xB0.85xH1.1 (mm) and output impedance of 90 ohm.
744232222
Wurth Elektronik 744232222 is a Data Line Filter with 2 functions, rated at 50V. It has 4 terminals and operates b/w -40 to 125°C. With dimensions of L3.2xB1.6xH1.9 (mm), it offers an output impedance of 2200Ω and max DC resistance of 1.2Ω, suitable for surface mount applications in various electronic devices.
744227
Wurth Elektronik 744227 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. Ideal for applications requiring surface mount filters with dimensions of L9.2xB6.0xH5.0mm, it operates b/w -40°C to 125°C and has a max DC resistance of 0.16 ohm.
744226S
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: 1.6 A; Output Impedance (ohm): 920 OHM; Width (mm): 6.0; No. of Terminals: 4;
744242510
Wurth Elektronik 744242510 is a Data Line Filter with UL approval, rated voltage of 80V, and inductance of 51uH. It has 2 functions, operates b/w -40°C to 125°C, and offers a max DC resistance of 0.32 ohm. This filter is ideal for applications requiring noise suppression in data lines.
744272471
DATA LINE FILTER; Maximum DC Resistance: .065 ohm; Rated Current: 1.6 A; Mounting Type: SURFACE MOUNT; Length: 10 mm; Packing Method: TAPE AND REEL;
744223
Wurth Elektronik 744223 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 500uH and max DC resistance of 0.15 ohm, it's ideal for applications requiring output impedance of 3300 OHM. This surface mount filter operates b/w -40 to 125 °C, making it suitable for various electronic devices.
744273501
Wurth Elektronik 744273501 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 5uH. It operates b/w -40°C to 125°C, has Tin/Copper terminals, and dimensions of L9.5xB8.3xH5.3mm. Ideal for applications requiring a max current of 5A and output impedance of 500Ω in surface mount configurations.
744224
Wuerth Elektronik & Kg 744224 Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 250uH. UL approved for applications requiring output impedance of 1800 ohm and rated current of 1.2A. Ideal for surface mount installations in electronics to filter data lines efficiently.
744220203
Wurth Elektronik 744220203 is a Data Line Filter with 2 functions and rated voltage of 80V. It has inductance of 20000uH, max operating temp of 125°C, and DC resistance of 2.6 ohm. Ideal for applications requiring noise suppression in data lines with approval from IEC standards.
744226
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: 1.6 A; Width (mm): 6.0; No. of Functions: 2; Inductance: 10 uH;
744220
Wurth Elektronik 744220 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 4.7uH and max DC resistance of 0.75 ohm, it's ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0 (mm).
744220103
DATA LINE FILTER; Maximum DC Resistance: 1.2 ohm; Rated Current: .35 A; No. of Terminals: 4; Packing Method: TR, EMBOSSED, 13 INCH; Height: 5 mm;
744231371
DATA LINE FILTER; Maximum DC Resistance: .45 ohm; Rated Current: .28 A; Terminal Finish: Tin (Sn); Rated Voltage: 50 V; No. of Terminals: 4;
744272121
Wurth Elektronik 744272121 is a Data Line Filter with 2 functions, rated at 80V. It has inductance of 120uH and operates b/w -40 to 125°C. Ideal for applications requiring filtering of data lines, it offers low DC resistance of 0.025 ohm and output impedance of 460Ω.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved