Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's DLW31SH222SQ2L is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 32V rated voltage. With dimensions of L3.2XB1.6XH1.9 (mm), it offers 10 Mohm min insulation resistance for automotive applications at temperatures ranging from -40 to 125 °C.
Median Price
$0.506
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.950
100+ parts
$0.628
1k+ parts
$0.519
10k+ parts
$0.465
DigiKey
$0.970
$0.655
$0.539
-
TTI
$0.426
Avnet
$0.393
Future Electronics
$0.875
Farnell
Element14
TTI Europe
$0.339
Newark
$0.724
$0.619
Arrow
$0.409
Verical
Chip1Stop
$0.293
RS (Exports)
$0.960
$0.882
Greenchips
$0.315
$0.295
Nova Conductors
$0.556
TME
$0.710
$0.454
$0.310
$0.300
IBS Electronics
$1.234
NAC Semi
$1.750
Vyrian
Rebound Electronics
Rutronik
$0.263
ComSIT Distribution GmbH
Bristol Electronics
SIE Connect GmbH - GreenChips
PC Components Company LLC
ACDS - Activité Composants Distribution Service
Semtec, LLC
Advanced Electronics
$0.132
$0.120
$0.108
Semicontronic
$0.212
$0.207
$0.206
Argo Parts USA
Continental Prestige Electronics
$0.590
$0.417
$0.383
$0.352
CoreStaff
$0.696
$0.374
$0.337
Aztec Data Supply Inc.
$1.120
Corohmni
$1.804
Kepictronics
Eastek
$0.370
Glotronic Ltd.
GreenTree Electronics
Perfect Parts
Abacus Technologies
Metaverse IC Inc.
Authorized Procurement Solutions
S.R.D Solutions
Netroflash
$0.545
$0.528
$0.517
High insulation resistance ensures reliable and safe operation of the data line filter.
Having 2 functions allows for effective filtering of data lines, reducing interference and noise.
AEC-Q200 screening ensures high quality and reliability, making it suitable for automotive applications.
Suitable for applications with a rated voltage of up to 32 V, providing flexibility in usage.
4 terminals allow for easy and secure connections, enhancing the overall usability of the data line filter.
Specifically designed for filtering data lines, ensuring optimal performance in data transmission.
Capable of operating at high temperatures, making it suitable for a wide range of environments and applications.
Able to function in low temperatures, making it versatile and reliable in various operating conditions.
Tin terminal finish offers good conductivity and protection against corrosion, ensuring long-term performance.
Compact width allows for easy integration into existing systems without taking up much space.
Low DC resistance minimizes signal loss and ensures efficient filtering of data lines.
Optimal length for accommodating the necessary components and circuitry for effective filtering.
Output impedance of 2200 ohms helps in matching impedance for better signal transmission.
Convenient packing method for easy handling, storage, and automated assembly processes.
Surface mount design simplifies installation and ensures secure attachment to circuit boards.
Compact dimensions make it versatile for integration in various electronic systems or PCB designs.
Rated current of 0.08 A indicates the maximum safe operating current for the data line filter.
Low profile height allows for flexible placement within electronic devices or systems.
Data Line Filters DLW31SH222SQ2L attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Maximum DC Resistance:
Filter Type:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Screening Level:
Terminal Finish:
Width (mm):
DLW31SH222SQ2L Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Infineon Technologies
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
742792656
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 742792656 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.35 ohm, and an output impedance of 750 OHM. Ideal for surface mount applications in electronics requiring filtering at frequencies ranging from 100 MHz to 150 MHz.
PA4339.501NLT
Pulse Electronics
PA4339.501NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 4uH and operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with a max current rating of 5A.
BLM21AG102SN1D
Murata Manufacturing
Murata Manufacturing's BLM21AG102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125 °C, offering 0.28 ohm DC resistance and 1000 OHM output impedance at 100 MHz. Ideal for data line filtering applications, it measures L2.0XB1.25XH0.85 mm and has a rated current of 0.5 A.
MH2029-301Y
Bourns
Bourns MH2029-301Y is a chip bead data line filter with 2 terminals. It offers 0.2 Mohm min insulation resistance, 100 MHz min frequency, and 1 A rated current. Ideal for applications requiring surface mount filters in compact dimensions like L2.0XB1.2XH0.9 (mm).
MMZ2012S102AT000
TDK
MMZ2012S102AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.35 ohm and rated current of 0.5 A, making it suitable for surface mount applications in electronic devices requiring noise suppression.
ILBB0603ER121V
Vishay Intertechnology's ILBB0603ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, offering a max DC resistance of 0.2 ohm and output impedance of 120 OHM at 100 MHz. Ideal for surface mount applications, it measures L1.6xB0.8xH0.8 (mm) and is approved by IEC for various electronic devices requiring noise suppression in data lines.
LI0402C221R-10
Laird Technologies
Laird Technologies' LI0402C221R-10 is a chip bead data line filter with 220 OHM output impedance, 0.35 ohm max DC resistance, and 25-1000 MHz frequency range. Ideal for surface mount applications in electronics to suppress electromagnetic interference (EMI) and ensure signal integrity.
4206-001LF
Cts
4206-001LF by Cts is a Data Line Filter with 10000 Mohm Min Insulation Resistance, 500 V Rated Voltage, and 70 dB Max Insertion Loss. Ideal for applications requiring noise suppression in data lines, it has a capacitance of 3000 uF and can handle up to 25 A current at temperatures up to 125 °C.
742792640
Wurth Elektronik 742792640 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.35 ohm, and output impedance of 300 OHM. Ideal for surface mount applications in electronics to filter frequencies from 100 MHz to 250 MHz.
MMZ2012Y301BTD25
TDK's MMZ2012Y301BTD25 is a chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.15 ohm, output impedance of 300 ohm, and rated current of 0.6 A, making it ideal for automotive applications requiring noise suppression in compact spaces.
NFZ15SG462SN10D
NFZ15SG462SN10D by Murata is a FERRITE CHIP filter with 2 terminals, rated at 0.27A. It has an output impedance of 4600Ω and operates b/w -40°C to 85°C. Ideal for data line filtering in surface mount applications.
742792114
Wurth Elektronik 742792114 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It operates b/w -55 to 125 °C, has a DC resistance of 0.025 ohm, and output impedance of 50 OHM. Ideal for data line filtering applications with a frequency range from 100 MHz to 1000 MHz.
744272332
Wurth Elektronik 744272332 is a Data Line Filter with UL approval, rated at 80V and inductance of 3300uH. It has 2 functions, operates b/w -40 to 125°C, and offers 0.36 ohm DC resistance. Ideal for applications requiring high output impedance of 8900 OHM in a compact L10.0xB8.7xH6.5 mm size for surface mount installation.
ACM4520V-142-2P-T00
ACM4520V-142-2P-T00 by TDK is a data line filter with 2 functions, rated voltage of 50V, and max operating temp of 125°C. Ideal for applications requiring high output impedance and insulation resistance in compact surface mount design.
ACP3225-501-2P-T000
TDK's ACP3225-501-2P-T000 is a FERRITE CHIP filter with 2 functions, rated at 60V and 2A. With dimensions of L3.2xB2.5xH1.9 (mm), it offers high insulation resistance for data line filtering applications in various electronic devices.
P0473NL
Pulse Electronics P0473NL is a data line filter with 2 functions, AEC-Q200 screening level. It offers inductance of 880uH, max operating temp of 120°C, and rated current of 1.63A. Ideal for applications requiring surface mount filters with dimensions L12.7xB12.7xH5.46mm such as automotive electronics.
ELKE103FA
Panasonic
Panasonic ELKE103FA is a 3-terminal data line filter with 50V rated voltage and 2A rated current. With dimensions of L3.2XB1.8XH2.2 (mm), it's ideal for surface mount applications, offering max DC resistance of 0.02 ohm and capacitance of 10000 uF. Operating b/w -20 to 85 °C, it ensures efficient filtering in electronic devices.
BMB2A1000LN2
TE Connectivity
TE Connectivity's BMB2A1000LN2 is an 0805 multilayer chip data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. With a DC resistance of 0.3 ohm, it has an output impedance of 1000 OHM and rated current of 0.35 A. Ideal for surface mount applications, this ferrite chip filter is commonly used in electronic devices requiring noise suppression on data lines.
MMZ2012Y202BTD25
MMZ2012Y202BTD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP construction, it has 2 terminals and operates b/w -55 to 125 °C. With a max DC resistance of 0.5 ohm, it is ideal for automotive applications requiring an output impedance of 2000 OHM.
4300-009LF
The Cts 4300-009LF is a Data Line Filter with FEED THROUGH CAPACITOR type, rated for 200V and 5A. It offers high insulation resistance of 10000 Mohm, low insertion loss of 25 dB, and capacitance of 25 uF. Ideal for applications requiring panel mounting in environments ranging from -55 to 125 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DLW31SN222SQ2L
Murata Manufacturing's DLW31SN222SQ2L is a Data Line Filter with 2 functions, rated at 50V. It offers a max DC resistance of 1.2 ohm and an output impedance of 2200 ohm. This surface mount filter operates b/w -40 to 85 °C and is ideal for applications requiring high insulation resistance.
DLW32MH101XT2L
DLW32MH101XT2L by Murata Manufacturing is a data line filter with 2 functions. It has a min insulation resistance of 10 Mohm and can operate at temperatures ranging from -40 to 125 °C. This filter is commonly used in automotive applications due to its AEC-Q200 screening level.
DLW31SN601SQ2L
DATA LINE FILTER; Maximum DC Resistance: .8 ohm; Rated Current: .26 A; Width (mm): 1.6; No. of Terminals: 4; Height: 1.9 mm;
DLW31SN261SQ2L
DATA LINE FILTER; Maximum DC Resistance: .5 ohm; Rated Current: .31 A; Additional Features: MAGNETICALLY SHIELDED ONE CIRCUIT TYPE; Output Impedance (ohm): 260 OHM; Rated Voltage: 50 V;
DLW32MH201XK2L
Murata Manufacturing DLW32MH201XK2L is a Data Line Filter with 200uH inductance, 10 Mohm insulation resistance, and AEC-Q200 screening. It operates b/w -40 to 125 °C, rated at 50V and 0.07A. Ideal for automotive applications requiring noise suppression in data lines.
DLW31SN102SQ2L
DLW31SN102SQ2L by Murata Mfg. is a Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 0.23A Rated Current. It has 2 functions and operates b/w -40 to 85 °C. Ideal for applications requiring high output impedance in compact spaces.
DLW32SH510XK2L
DATA LINE FILTER; Maximum DC Resistance: .7 ohm; Rated Current: .2 A; Width (mm): 2.5; No. of Terminals: 4; Inductance: 51 uH;
DLW31SN222SQ2B
Murata Manufacturing's DLW31SN222SQ2B is a data line filter with 2 functions, rated at 50V and 0.2A. It offers a max DC resistance of 1.2 ohm and an output impedance of 2200 ohm. This surface mount filter operates b/w -40°C to 85°C, ideal for applications requiring high insulation resistance and effective noise filtering.
DLW31SN900SQ2L
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .37 A; Maximum Operating Temperature: 85 Cel; Dimensions: L3.2XB1.6XH1.9 (mm)/L0.126XB0.063XH0.075 (inch); Packing Method: TAPE AND REEL;
DLW32MH101XK2L
DATA LINE FILTER; Maximum DC Resistance: 3.36 ohm; Rated Current: .1 A; Screening Level: AEC-Q200; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel;
DLW32SH101XF2L
DLW32SH101XF2L by Murata Mfg. is a Data Line Filter with 100uH inductance, 10 Mohm min insulation resistance, and AEC-Q200 screening level. Ideal for applications requiring filtering of data lines in automotive electronics due to its 50V rated voltage and -40 to 125 °C operating temperature range.
DLW32SH101XK2L
DATA LINE FILTER; Maximum DC Resistance: 1.5 ohm; Rated Current: .15 A; Height: 2.35 mm; Mounting Type: SURFACE MOUNT; Length: 3.2 mm;
DLW31SN102SQ2B
DATA LINE FILTER; Maximum DC Resistance: 1 ohm; Rated Current: .23 A; Additional Features: BAG; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT;
DLW31SN161SQ2B
DATA LINE FILTER; Maximum DC Resistance: .4 ohm; Rated Current: .34 A; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; No. of Terminals: 4;
DLW31SN161SQ2L
DATA LINE FILTER; Maximum DC Resistance: .4 ohm; Rated Current: .34 A; Height: 1.9 mm; Mounting Type: SURFACE MOUNT; Width (mm): 1.6;
DLW31SN601SQ2B
DATA LINE FILTER; Maximum DC Resistance: .8 ohm; Rated Current: .26 A; Width (mm): 1.6; Height: 1.9 mm; Output Impedance (ohm): 600 OHM;
DLW31SN900SQ2B
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .37 A; Additional Features: BAG; Rated Voltage: 50 V; Dimensions: L3.2XB1.6XH1.9 (mm)/L0.126XB0.063XH0.075 (inch);
DLW31SN222SQ2
DATA LINE FILTER; Maximum DC Resistance: 1.2 ohm; Rated Current: .2 A; Maximum Operating Temperature: 85 Cel; Length: 3.2 mm; Terminal Finish: TIN;
DLW31SH222SQ2
DATA LINE FILTER; Maximum DC Resistance: 1.6 ohm; Rated Current: .08 A; Maximum Operating Temperature: 125 Cel; Manufacturer Series: DLW31SH; Length: 3.2 mm;
DLW31SH222SQ2B
DATA LINE FILTER; Maximum DC Resistance: 1.6 ohm; Rated Current: .08 A; Packing Method: BULK; JESD-609 Code: e3; Output Impedance (ohm): 2200 OHM;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved