Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata's BLM03BD241SN1D is a chip bead data line filter with 2 terminals, operating from -55°C to 125°C. It offers a DC resistance of 0.8 ohm, output impedance of 240 ohm, and rated current of 0.2 A. Ideal for surface mount applications in filtering frequencies b/w 100 MHz, it comes in compact dimensions of L0.6xB0.3xH0.3 mm and is packed in tape and reel format.
Median Price
$0.100
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.018
1k+ parts
$0.012
10k+ parts
$0.008
DigiKey
$0.013
$0.009
TTI
-
Chip1Stop
$0.015
$0.011
Arrow
Verical
Nova Conductors
$0.010
Bristol Electronics
$0.056
$0.028
$0.006
IBS Electronics
NAC Semi
Vyrian
Prism Electronics
SPM Sales
Legend Electronics Inc.
Dan-Mar Components
VNN
Semicontronic
$0.004
Corohmni
Netroflash
Argo Parts USA
Advanced Electronics
$0.173
$0.157
$0.142
Aztec Data Supply Inc.
$3.179
Perfect Parts
Futuretech Components
Continental Prestige Electronics
$0.007
Chip bead construction provides compact size and high performance in filtering unwanted noise and interference.
Having 2 terminals allows for easy connection and installation in circuit boards.
Standard case code ensures compatibility with various mounting techniques.
Ferrite chip filters are known for their effectiveness in reducing electromagnetic interference.
High maximum operating temperature ensures reliable performance even in demanding environments.
Low minimum operating temperature allows for use in a wide range of temperature conditions.
Tin terminal finish provides good conductivity and solderability for secure connections.
Slim width makes the filter suitable for applications with space constraints.
Supports filtering at low frequencies to eliminate unwanted signals effectively.
Low DC resistance ensures minimal power loss in the circuit.
Compact length contributes to the overall small footprint of the filter.
High maximum frequency capability enables effective filtering of higher frequency signals.
Output impedance of 240 ohms helps in matching impedance levels for optimal signal transfer.
Tape and reel packaging facilitates automated assembly processes, saving time and costs.
Surface mount design simplifies installation on PCBs and improves space utilization.
Compact dimensions make it suitable for miniaturized electronic designs.
Rated current of 0.2A allows for use in low-power applications without overheating.
Low height profile helps in fitting the filter in tight spaces within the circuit.
Ferrite material provides high magnetic permeability for effective noise suppression.
Data Line Filters BLM03BD241SN1D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
BLM03BD241SN1D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200253
Molex
WIRE AND CABLE;
General Diode
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USB3320C-EZK-TR
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
BL02RN2R1M2B
Murata Manufacturing
Murata Manufacturing's BL02RN2R1M2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range, and Through Hole Mount. Ideal for noise suppression in electronic circuits.
ILHB0603ER121V
Vishay Intertechnology's ILHB0603ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C and has a DC resistance of 0.1 ohm. Ideal for applications requiring a 120 OHM output impedance at frequencies up to 100 MHz, this chip is compact at L1.6xB0.8xH0.8 mm and mounts easily on surfaces.
744230900
Wuerth Elektronik & Kg
Wurth Elektronik 744230900 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. Ideal for surface mount applications, it has dimensions of L1.6xB0.85xH1.1 (mm) and output impedance of 90 ohm.
NUF4401MNT1G
Onsemi
NUF4401MNT1G by Onsemi is a data line filter with 4 functions and a rated voltage of 5V. It has a max attenuation frequency of 900MHz and can operate at temperatures ranging from -40 to 85°C. This surface mount device is commonly used for filtering data lines in various electronic applications.
35F0121-0SR-10
Steward
DATA LINE FILTER; Construction: Chip Bead; Maximum DC Resistance: .0007 ohm; Maximum Frequency: 10 MHz; Material: Ferrite; Rated Current: 10 A;
BK2125HM102-T
Taiyo Yuden
BK2125HM102-T by Taiyo Yuden is a chip bead data line filter with 400V rated voltage, -55 to 125°C operating temperature range, and 1000 ohm output impedance. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100MHz.
1806J0500204MXTE07
Knowles Precision Devices
1806J0500204MXTE07 by Knowles Precision Devices is a feed through capacitor with 50V rated voltage, 200000uF capacitance, and 2A rated current. It is used in data line filters for applications requiring high insulation resistance and operating temperatures ranging from -55 to 85°C.
MPZ2012S101AT000
TDK
TDK's MPZ2012S101AT000 is an 0805 chip bead filter with 2 terminals, ideal for data line applications. With a max operating temp of 125°C and min freq of 100 MHz, it offers low DC resistance at 0.02 ohm. This ferrite chip filter has dimensions of L2.0xB1.25xH0.85 mm and rated current of 4A, suitable for surface mounting in various electronic devices.
MPZ2012S300AT000
TDK's MPZ2012S300AT000 is a chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.01 ohm and output impedance of 30 ohm at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
744242220
Wurth Elektronik 744242220 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 22uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.23 ohm. Ideal for applications requiring filtering on data lines with UL approval.
ACT1210-101-2P-TL00
TDK's ACT1210-101-2P-TL00 is a data line filter with 10 Mohm insulation resistance, 80V rated voltage, and 100uH inductance. It has 2 functions and operates b/w -40 to 150 °C, making it ideal for automotive applications meeting AEC-Q200 standards.
MMZ1608Y601BTA00
TDK's MMZ1608Y601BTA00 is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it has a max operating temp of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 mm, it offers an output impedance of 600 ohm and rated current of 0.5 A, ideal for surface mount applications in electronics.
BLM31AJ601SN1L
BLM31AJ601SN1L by Murata Manufacturing is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter measures L3.2XB1.6XH1.1 (mm) and is commonly used for impedance matching in electronic circuits.
744242471
Wurth Elektronik 744242471 is a Data Line Filter with UL approval, rated at 80V. It features 2 functions, inductance of 470uH, and max operating temp of 125°C. Ideal for applications requiring filtering in data lines with surface mounting type.
BNX024H01L
Murata Manufacturing's BNX024H01L is a 50V data line filter with 100 Mohm insulation resistance. AEC-Q200 screening level ensures high quality for automotive applications. With dimensions of L12.1xB9.1xH3.5 mm, it offers 15A rated current and 50 ohm output impedance for surface mount installation.
RB6122-16-1M0
Schaffner Holding Ag
RB6122-16-1M0 by Schaffner Holding Ag is a UL-approved data line filter with 1000uH inductance, 16A rated current, and 1000V rated voltage. It operates b/w -40°C to 125°C and is ideal for applications requiring noise suppression in data lines.
ACF321825-102-TD01
TDK's ACF321825-102-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 140 MHz. It has a rated voltage of 20 V, 0.15 ohm DC resistance, and dimensions of L3.2XB1.8XH2.5 mm. Ideal for data line filtering applications due to its high insulation resistance and compact surface mount design.
MMZ2012S102ATD25
MMZ2012S102ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP construction, it has 2 terminals and operates b/w -55 to 125 °C. With dimensions of L2.0XB1.25XH0.85 (mm), it offers a max DC resistance of 0.35 ohm and output impedance of 1000 OHM, making it ideal for automotive applications due to its high rated current of 0.5 A.
BLM31PG330SN1L
Murata Manufacturing's BLM31PG330SN1L is a chip bead data line filter with 2 terminals, rated for 6A current. With dimensions of L3.2xB1.6xH1.1 mm, it offers an output impedance of 33 ohm and operates b/w -55 to 125°C. Ideal for surface mount applications in filtering frequencies from 100 MHz with a max DC resistance of 0.01 ohm.
BLM18PG471SN1D
BLM18PG471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLM03AX102SN1D
FERRITE BEAD; Construction: Chip Bead; Maximum DC Resistance: 1.25 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
BLM03AX241SN1D
FERRITE BEAD; Construction: Chip Bead; Maximum DC Resistance: .38 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .35 A;
BLM03AX601SN1D
FERRITE BEAD; Construction: Chip Bead; Maximum DC Resistance: .85 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .25 A;
BLM03HD331SN1D
Murata's BLM03HD331SN1D is a chip bead data line filter with 330 Ohm output impedance, suitable for surface mount applications. With dimensions of L0.6xB0.3xH0.3 mm, it operates b/w -55 to 125°C and supports frequencies from 100 MHz to 1 GHz, offering low DC resistance of 1 ohm for effective filtering in electronic circuits.
BLM03AG121SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .5 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
BLM03AG241SN1D
Murata's BLM03AG241SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 0.6x0.3x0.3mm, it offers a max DC resistance of 0.8 ohm and output impedance of 240 ohm at frequencies up to 100 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BLM03BD121SN1D
Murata's BLM03BD121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of L0.6xB0.3xH0.3 mm, it offers a max frequency of 100 MHz and DC resistance of 0.5 ohm. Ideal for surface mount applications in electronic devices requiring impedance control at 120 ohms.
BLM03HB191SN1D
BLM03HB191SN1D by Murata Manufacturing is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter is commonly used for impedance matching in electronic devices.
BLM03HD102SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 2.9 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .12 A;
BLM03HD471SN1D
BLM03HD471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter is commonly used for surface mount applications to reduce electromagnetic interference in data lines.
BLM03AG601SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 1.5 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .1 A;
BLM03BD471SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 1.5 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .215 A;
BLM03BD601SN1D
BLM03BD601SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used for surface mount applications to reduce noise in data lines.
BLM03BB121SN1D
BLM03HG601SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 1.6 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .15 A;
BLM03HD601SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 1.7 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .15 A;
BLM03HG102SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 2.6 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .125 A;
BLM03AG102SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 2.5 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .1 A;
BLM03AX121SN1D
FERRITE BEAD; Construction: Chip Bead; Maximum DC Resistance: .23 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .45 A;
BLM03BD241SN1J
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .8 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved