Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EMI8143MUTAG by Onsemi is a data line filter with 16 terminals, operating b/w -40°C to 85°C. It has a power supply of 3.3V and features nickel palladium gold terminal finish. Ideal for applications requiring surface mount filters in plastic packages.
Median Price
$0.562
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.519
Flip Electronics
$0.330
Nova Conductors
$0.563
Bristol Electronics
$1.500
$0.555
$0.390
Chip Stock
Vyrian
Digiode
Semicontronic
$0.400
$0.388
Corohmni
$0.552
Netroflash
$0.535
$0.523
Argo Parts USA
$0.546
Continental Prestige Electronics
Aztec Data Supply Inc.
$1.250
Ampacity Inc.
$2.400
AZTECH Wire
$15.871
RC Electronics
ChipstoGo Electronic ltd
TANS Electronics
A-Z Elektronik GmbH
Kulean Microsystems
Kepictronics
Lixinc
Futuretech Components
Corphita
iodParts Technologies Inc.
SupplyDigital Components
Problanco Electronics
S.R.D Solutions
UHIMA Technologies
Having 16 terminals allows for a more stable and secure connection, reducing the risk of data loss or interference.
Being a data line filter, this product can effectively eliminate noise and interference from data signals, ensuring a clean and reliable data transmission.
With a high maximum operating temperature of 85°C, this product can withstand heat and operate efficiently in various environments.
The low minimum operating temperature of -40°C ensures that this product can function reliably even in cold conditions.
The nickel, palladium, and gold terminal finish provides excellent conductivity and corrosion resistance, ensuring long-term performance and durability.
Operating with a power supply of 3.3 volts, this product is energy-efficient and compatible with standard power sources.
The surface mount design allows for easy and secure installation on circuit boards, saving space and ensuring a reliable connection.
Made of plastic, this product is lightweight and durable, ideal for use in various applications without adding unnecessary weight.
Data Line Filters EMI8143MUTAG attributes and parameters. Explore more Data Line Filters devices from Onsemi
Filter Type:
JESD-609 Code:
Manufacturer Series:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Material:
Power Supply (V):
Sub-Category:
Terminal Finish:
EMI8143MUTAG Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Assembly/Origin - EMI8x 20/Apr/2022
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
Leshan Radio
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
Laube Technology
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
742792796
Wuerth Elektronik & Kg
Wurth Elektronik 742792796 is a FERRITE CHIP data line filter with 2 terminals, rated for 0.2A current. It operates b/w -55 to 125 °C and has a max DC resistance of 1.5 ohm. Ideal for surface mount applications requiring output impedance of 1000 OHM in compact spaces.
TLC/2.5A-101M-00
Fastron Electronics
Fastron Electronics' TLC/2.5A-101M-00 is a 100uH data line filter with 2 terminals, AEC-Q200 approval, and -55 to 115°C operating range. Ideal for applications requiring 2.5A rated current, it offers low 0.06 ohm DC resistance and through-hole mounting in a compact 14x31mm size.
FBMJ4516HS111-T
Taiyo Yuden
FBMJ4516HS111-T by Taiyo Yuden is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 85°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.
MPZ2012S102JTD25
TDK
The TDK MPZ2012S102JTD25 is a FERRITE CHIP data line filter with 2 terminals, AEC-Q200 screening. It has a max operating temp of 125°C, min of -55°C, and DC resistance of 0.15 ohm. Ideal for automotive applications due to its high output impedance of 1000 OHM and rated current of 1.5 A.
2773021447
Fair-rite Products
Fair-rite Products' 2773021447 is a FERRITE BEAD filter with 2 terminals, matte tin finish, and 70 OHM impedance. Ideal for data line filtering in surface mount applications due to its compact dimensions of L9.6XB3.05XH2.85 mm.
NFM18PC104R1C3D
Murata Manufacturing
Murata Manufacturing's NFM18PC104R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 100000 uF capacitance. It is a feed through capacitor used in applications requiring filtering of electrical signals.
BLM21BD222TN1D
Murata's BLM21BD222TN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125°C. With a DC resistance of 0.6 ohm and output impedance of 2200 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
BLM18SG700TN1D
Murata's BLM18SG700TN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. With dimensions of 1.6x0.8x0.5mm, it offers an output impedance of 70Ω and rated current of 4A. Ideal for surface mount applications, this ferrite chip filter has a max frequency of 100MHz, making it suitable for noise suppression in electronic circuits.
BLM18SG260TN1D
Murata's BLM18SG260TN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.5mm, it offers a max DC resistance of 0.007 ohm and output impedance of 26 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 6A and is commonly used in electronic devices for noise suppression.
54-844-001
Api Technologies
54-844-001 by Api Technologies is a UL/CSA approved data line filter with a rated voltage of 600V. Featuring a feed through capacitor, it offers max insertion loss of 50dB and capacitance of 4700uF. Ideal for panel mounting applications, this filter operates at temperatures up to 125°C.
ECMF4-20A42N10
STMicroelectronics
ECMF4-20A42N10 by STMicroelectronics is a data line filter with 4 functions and 10 terminals. It operates in temperatures ranging from -55°C to 125°C and has dimensions of 2.25mm x 1.4mm x 0.5mm. It is commonly used for IEC-approved applications requiring surface mounting type.
MMZ1608A252BTD25
TDK's MMZ1608A252BTD25 is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP construction, it has 2 terminals and operates b/w -55 to 125 °C. With dimensions of L1.6xB0.8xH0.8 (mm), it offers an output impedance of 2500 OHM and rated current of 0.2 A, making it ideal for automotive applications.
EXC3BB221H
The Panasonic EXC3BB221H is a 0603 multilayer chip data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -25 to 85 °C, and offers an output impedance of 220 OHM. Ideal for surface mount applications, it measures L1.6XB0.8XH0.8 (mm) and is suitable for filtering signals up to 100 MHz frequency range.
744226S
744226S by Wurth Elektronik is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 10uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.08 ohm, and an output impedance of 920 ohm. This surface mount filter is ideal for applications requiring noise suppression in data lines.
BLM18AG601SN1B
Murata's BLM18AG601SN1B is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.38 ohm and operates b/w -55°C to 125°C. This ferrite chip filter has an output impedance of 600 ohm and is rated for a current of 0.5A, making it suitable for noise suppression in circuits up to 100MHz frequency range.
BLM21AG151SN1D
BLM21AG151SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals and an 0805 case code. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications to reduce noise in data lines.
SRF2012-900YA
Bourns
Bourns SRF2012-900YA is a Data Line Filter with 2 functions, rated at 50V and 0.4A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 125 °C, and has a compact size of L2.0xB1.2XH1.2 (mm). Ideal for applications requiring effective filtering in limited space like consumer electronics and communication devices.
BLM21PG221SN1
Murata Manufacturing's BLM21PG221SN1 is a FERRITE CHIP filter with 2 terminals, rated for 2A current. With dimensions of L2.0XB1.25XH0.85 (mm), it offers an output impedance of 220 ohm and max DC resistance of 0.05 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C in surface mount configurations.
FLTR75V05Z
Abb
FLTR75V05Z by Abb is a 2-function data line filter module with UL, CAN, CSA, VDE, EN approvals. It operates at 75V and 5A with max DC resistance of 0.02 ohm. Ideal for applications requiring filtering in data lines due to its compact dimensions and wide temperature range (-40°C to 100°C).
7427927311
Wurth Elektronik 7427927311 is a FERRITE CHIP Data Line Filter with AEC-Q200 screening. It has 2 terminals, operates b/w -55 to 125 °C, and offers 0.09 ohm DC resistance. Ideal for surface mount applications, it measures L1.0xB0.5xH0.5 mm and handles a rated current of 1.2A while providing an output impedance of 120 OHM.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EMI8142MUTAG
EMI8142MUTAG by Onsemi is a data line filter with 10 terminals, operating b/w -40°C to 85°C. It has a power supply of 3.3V and features nickel palladium gold terminal finish. Ideal for applications requiring surface mount filters in plastic packages.
EMI8031MUTAG
DATA LINE FILTER; Rated Current: .1 A; Minimum Operating Temperature: -40 Cel; Length: 1.5 mm; Approvals (V): IEC61000-4-2; No. of Functions: 1;
EMI8032MUTAG
DATA LINE FILTER; Rated Current: .1 A; Approvals (V): IEC61000-4-2; Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 50 OHM; Width (mm): 1.35;
EMI8033MUTAG
DATA LINE FILTER; Rated Current: .1 A; Screening Level: AEC-Q101; Width (mm): 1.35; Mounting Type: SURFACE MOUNT; No. of Terminals: 6;
EMI8041BMUTAG
DATA LINE FILTER; Rated Current: 100 A; Output Impedance (ohm): 50 OHM; Height: .55 mm; Terminal Finish: NICKEL GOLD PALLADIUM; Packing Method: TR;
EMI8041MUTAG
DATA LINE FILTER; Package Material: PLASTIC; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e4; No. of Terminals: 6;
EMI8042MUTAG
DATA LINE FILTER; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e4; No. of Terminals: 10; Terminal Finish: NICKEL PALLADIUM GOLD; Minimum Operating Temperature: -40 Cel;
EMI8043MUTAG
EMI8043MUTAG by Onsemi is a data line filter with 16 terminals, operating temperature range of -40 to 85°C. It features nickel palladium gold silver finish, surface mounting type, and plastic package material. Ideal for applications requiring noise suppression in data transmission systems.
EMI8131MUTAG
DATA LINE FILTER; Rated Current: .1 A; Height: .5 mm; JESD-609 Code: e4; Output Impedance (ohm): 50 OHM; Approvals (V): IEC;
EMI8132MUTAG
DATA LINE FILTER; Height: .5 mm; Width (mm): 1.35; Length: 2.2 mm; JESD-609 Code: e4; Rated Voltage: 9 V;
EMI8133MUTAG
DATA LINE FILTER; Height: .5 mm; Width (mm): 1.35; No. of Terminals: 16; Length: 3.5 mm; JESD-609 Code: e4;
EMI8141MUTAG
DATA LINE FILTER; Manufacturer Series: EMI8141; No. of Terminals: 6; Maximum Operating Temperature: 85 Cel; Power Supply (V): 3.3; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved