Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EMI8133MUTAG by Onsemi is a Data Line Filter with 16 terminals and rated voltage of 9V. It features nickel palladium gold terminal finish, dimensions of L3.5xB1.35xH0.5 mm, and surface mounting type. Ideal for applications requiring data line filtering in compact spaces due to its small size and high terminal count.
Median Price
$1.142
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
$0.753
100+ parts
$0.708
1k+ parts
$0.640
10k+ parts
-
Mouser Electronics
$1.530
$1.010
$0.704
$0.645
Digiode
$0.715
Vyrian
Flip Electronics
Chip Stock
Corphita
$0.678
Corohmni
Native Components
$1.018
Northwest PG Solutions
$1.119
Perfect Parts
Problanco Electronics
Futuretech Components
A-Z Elektronik GmbH
Authorized Procurement Solutions
SupplyDigital Components
Kulean Microsystems
Kepictronics
TANS Electronics
UHIMA Technologies
Low voltage requirement makes it suitable for a wide range of electronic devices.
Multiple terminals allow for versatile connectivity options.
Effective filtering of data lines to reduce noise and interference.
High-quality terminal finish ensures reliable connections and durability.
Compact width allows for space-efficient installation in various devices.
Optimal length for effective filtration and signal integrity.
Convenient surface mount design for easy integration into circuit boards.
Compact dimensions make it suitable for compact electronic devices.
Low profile design for space-saving installation in various applications.
Data Line Filters EMI8133MUTAG attributes and parameters. Explore more Data Line Filters devices from Onsemi
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Terminals:
Dimensions:
Rated Voltage:
Terminal Finish:
Width (mm):
EMI8133MUTAG Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Assembly/Origin - EMI8x 20/Apr/2022
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Weitron Technology
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Semitronics
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Formosa Microsemi
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BLM18EG391TN1D
Murata Manufacturing
Murata Manufacturing's BLM18EG391TN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.5mm, it offers a frequency range of 100-1000 MHz and DC resistance of 0.3 ohm. Ideal for surface mount applications, providing an output impedance of 520 ohm at a rated current of 0.5A.
FCFBMJ3216HS800-T
Taiyo Yuden
Taiyo Yuden's FCFBMJ3216HS800-T is a Ferrite Chip Data Line Filter with 2 terminals, 80 Ohm output impedance, and 4A rated current. Ideal for surface mount applications, it operates b/w -40°C to 85°C, offering low DC resistance of 0.01 ohm.
KBMF01SC6
STMicroelectronics
STMicroelectronics KBMF01SC6 is a DATA LINE FILTER with 2 functions and 5 terminals. It has a max operating temperature of 70°C, DC resistance of 39 ohm, and capacitance of 120 uF. Ideal for IEC-approved applications requiring surface mount filters in compact dimensions L3.05xB1.75xH1.45 mm.
742792602
Wuerth Elektronik & Kg
Wurth Elektronik 742792602 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 60 ohm at frequencies ranging from 100 MHz to 600 MHz.
LFBK1608TS102-T
LFBK1608TS102-T by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of 1.6x0.8x0.8mm, it's ideal for surface mount applications requiring an output impedance of 1000Ω and rated current of 0.3A.
LI0805H151R-10
Steward
FERRITE CHIP; Construction: Chip; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
744231091
Wurth Elektronik 744231091 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has 4 terminals, tin finish, and dimensions of L2.0xB1.2xH1.2 (mm). Ideal for applications requiring filtering in data lines with a current rating of 0.37A.
BLM18KG101TN1D
Murata Manufacturing's BLM18KG101TN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.6mm, it offers a max DC resistance of 0.03 ohm and output impedance of 100 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications requiring a rated current of 3A in filtering electronic signals.
BLA31AG601SN4D
Murata Manufacturing's BLA31AG601SN4D is a Ferrite Chip Data Line Filter with 4 functions and 8 terminals. It has a max operating temperature of 125°C, DC resistance of 0.35 ohm, and output impedance of 600 ohm. Ideal for surface mount applications in electronics to reduce electromagnetic interference.
BLM15BD601SN1D
Murata's BLM15BD601SN1D is a 0402 chip bead filter with 2 terminals, operating from -55 to 125°C. With a DC resistance of 0.65 ohm and output impedance of 600 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
744242471
Wurth Elektronik 744242471 is a Data Line Filter with UL approval, rated at 80V. It features 2 functions, inductance of 470uH, and max operating temp of 125°C. Ideal for applications requiring filtering in data lines with surface mounting type.
742792037
Wurth Elektronik 742792037 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with a DC resistance of 0.08 ohm and output impedance of 330 OHM. Measuring L2.0XB1.2XH0.9 (mm), it has a max frequency of 250 MHz and rated current of 2 A, making it ideal for surface mount installations in electronic devices.
MI1206K601R-10
Laird Technologies
MI1206K601R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L3.2XB1.6XH1.1 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 600 OHM. Ideal for surface mount applications, it has a max DC resistance of 0.08 ohm and can handle a rated current of 1.5 A.
BLM31PG121SN1B
Murata's BLM31PG121SN1B is a chip bead filter with 2 terminals, rated for 3A current. With dimensions of L3.2xB1.6xH1.1mm, it operates b/w -55 to 125°C and offers an output impedance of 120Ω at frequencies ranging from 100MHz to DC. Ideal for data line filtering applications due to its ferrite construction and surface mounting type.
BLM18PG121SN1D
Murata's BLM18PG121SN1D is a chip bead data line filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, offering 120 ohm impedance at 100MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
BLM18AG601SN1J
Murata Manufacturing's BLM18AG601SN1J is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it operates b/w -55 to 125 °C and has a max DC resistance of 0.38 ohm. With dimensions of L1.6xB0.8xH0.8 (mm), it is ideal for applications requiring a 600 OHM output impedance at frequencies ranging from 100 MHz, packed in tape for surface mount installation.
BLM21PG331BH1D
Murata Manufacturing's BLM21PG331BH1D is a FERRITE CHIP filter with 2 terminals, AEC-Q200 compliant. It offers 330 OHM output impedance, 0.07 ohm DC resistance, and 0.01 A rated current. Ideal for data line filtering applications with a temperature range of -55 to 150 °C.
BLM18EG221SN1D
Murata Manufacturing's BLM18EG221SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.05 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 260 ohm at frequencies ranging from 100 MHz to 1000 MHz.
ACM2520-301-2P-T002
TDK's ACM2520-301-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.4A. With dimensions of L2.5xB2.0xH1.2 (mm), it offers insulation resistance of 10 Mohm for data line filtering applications in electronics, ensuring reliable performance from -40 to 85 °C temperatures.
320-0548
C & K Components
The C & K Components 320-0548 is a UL-approved data line filter with 2 functions and 11 terminals. Featuring an inductance of 3800 uH, it has a max DC resistance of 0.21 ohm. This filter, measuring 31.75mm in width and 35.56mm in length, is ideal for applications requiring a rated current of 1.25A such as data transmission systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EMI8143MUTAG
DATA LINE FILTER; Terminal Finish: NICKEL PALLADIUM GOLD; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Power Supply (V): 3.3; No. of Terminals: 16;
EMI8142MUTAG
EMI8142MUTAG by Onsemi is a data line filter with 10 terminals, operating b/w -40°C to 85°C. It has a power supply of 3.3V and features nickel palladium gold terminal finish. Ideal for applications requiring surface mount filters in plastic packages.
EMI8031MUTAG
DATA LINE FILTER; Rated Current: .1 A; Minimum Operating Temperature: -40 Cel; Length: 1.5 mm; Approvals (V): IEC61000-4-2; No. of Functions: 1;
EMI8032MUTAG
DATA LINE FILTER; Rated Current: .1 A; Approvals (V): IEC61000-4-2; Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 50 OHM; Width (mm): 1.35;
EMI8033MUTAG
DATA LINE FILTER; Rated Current: .1 A; Screening Level: AEC-Q101; Width (mm): 1.35; Mounting Type: SURFACE MOUNT; No. of Terminals: 6;
EMI8041BMUTAG
DATA LINE FILTER; Rated Current: 100 A; Output Impedance (ohm): 50 OHM; Height: .55 mm; Terminal Finish: NICKEL GOLD PALLADIUM; Packing Method: TR;
EMI8041MUTAG
DATA LINE FILTER; Package Material: PLASTIC; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e4; No. of Terminals: 6;
EMI8042MUTAG
DATA LINE FILTER; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e4; No. of Terminals: 10; Terminal Finish: NICKEL PALLADIUM GOLD; Minimum Operating Temperature: -40 Cel;
EMI8043MUTAG
EMI8043MUTAG by Onsemi is a data line filter with 16 terminals, operating temperature range of -40 to 85°C. It features nickel palladium gold silver finish, surface mounting type, and plastic package material. Ideal for applications requiring noise suppression in data transmission systems.
EMI8131MUTAG
DATA LINE FILTER; Rated Current: .1 A; Height: .5 mm; JESD-609 Code: e4; Output Impedance (ohm): 50 OHM; Approvals (V): IEC;
EMI8132MUTAG
DATA LINE FILTER; Height: .5 mm; Width (mm): 1.35; Length: 2.2 mm; JESD-609 Code: e4; Rated Voltage: 9 V;
EMI8141MUTAG
DATA LINE FILTER; Manufacturer Series: EMI8141; No. of Terminals: 6; Maximum Operating Temperature: 85 Cel; Power Supply (V): 3.3; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved