Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 744242101 is a Data Line Filter with UL approval, rated at 80V. Featuring inductance of 100uH, it has a max DC resistance of 0.58 ohm and output impedance of 4000 ohm. Ideal for applications requiring noise suppression in data lines with surface mounting type.
Median Price
$3.590
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Distrelec
1+ parts
$2.460
100+ parts
-
1k+ parts
10k+ parts
Bürklin Elektronik
$3.340
$2.700
$2.500
DigiKey
$2.902
$2.273
Mouser Electronics
$2.910
$2.480
Farnell
$3.857
$3.111
$2.622
$2.314
Newark
$4.070
$3.390
$2.960
Element14
$3.204
$2.699
$2.633
Greenchips
$2.221
$2.115
$2.014
$1.818
Nova Conductors
$2.549
ComSIT Distribution GmbH
Chip Stock
Vyrian
LIBRA Elektronik GmbH
SIE Connect GmbH - GreenChips
ComSIT USA
Sunrise Surplus Inc.
VNN
Rebound Electronics
ACDS - Activité Composants Distribution Service
Advanced Electronics
$0.409
$0.372
$0.335
Aztec Data Supply Inc.
$1.808
Ampacity Inc.
$2.090
Semicontronic
$2.038
$2.027
Corohmni
$2.471
Argo Parts USA
Netroflash
$2.421
$2.370
Continental Prestige Electronics
$2.498
Perfect Parts
Authorized Procurement Solutions
Kepictronics
Robosynatics
$77.930
Lucentia Tech
Component Connect
UL approval ensures that the product meets safety and quality standards set by a reputable organization.
Suitable for use with devices that operate within a voltage range of up to 80V, providing protection for various data lines.
Having 4 terminals allows for secure connections and stable data transmission.
With a high maximum operating temperature, this filter is reliable in diverse operating conditions.
The inductance value of 100 uH helps in reducing electromagnetic interference and ensuring clean data transmission.
A compact width of 3.3mm makes this filter suitable for space-constrained applications.
The high output impedance of 4000 ohms helps in attenuating unwanted signals and noise from data lines.
The surface mount design makes installation easy and provides a secure and compact integration into electronic devices.
With a rated current of 0.3 A, this filter can effectively handle the current demands of data lines without overheating.
Being low-profile at 3.3mm, this filter can be easily accommodated in various electronic devices without taking up much space.
Data Line Filters 744242101 attributes and parameters. Explore more Data Line Filters devices from Wurth Elektronik
Approvals (V):
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
744242101 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
MPZ1608B471ATA00
TDK
The TDK MPZ1608B471ATA00 is a Ferrite Chip Data Line Filter with 2 terminals, rated for 1A current. It offers an output impedance of 47 ohms and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring effective filtering in compact spaces.
NFE31PT222Z1E9L
Murata Manufacturing
NFE31PT222Z1E9L by Murata Manufacturing is a data line filter with a rated voltage of 25V and a capacitance of 2200uF. It has a min insulation resistance of 1000 Mohm and is suitable for surface mount applications.
BLM18KG221SN1D
Murata Manufacturing's BLM18KG221SN1D is a chip bead data line filter with 2 terminals, rated for 2.2A current and 220 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
744220
Wuerth Elektronik & Kg
Wurth Elektronik 744220 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 4.7uH and max DC resistance of 0.75 ohm, it's ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0 (mm).
NFM21CC471R1H3D
Murata Manufacturing's NFM21CC471R1H3D is a data line filter with 470uF capacitance, 50V rated voltage, and 1A rated current. It features a feed through capacitor design for high insulation resistance applications. Ideal for surface mount installations in various electronic devices operating b/w -55°C to 125°C.
BLM21BD471SN1D
Murata's BLM21BD471SN1D is an 0805 chip bead filter with 470 OHM output impedance, 0.35 ohm DC resistance, and 100 MHz frequency range. Ideal for data line filtering applications due to its compact size (L2.0XB1.25XH0.85 mm) and surface mounting type.
MI0603J601R-10
Laird Technologies
Laird Technologies' MI0603J601R-10 is a chip bead data line filter with 2 terminals, operating from -40 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.2 ohm and an output impedance of 600 ohm for frequencies ranging from 25MHz to 1000MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 1A and is commonly used in electronic devices requiring noise suppression on data lines.
74279220601
FERRITE CHIP; Maximum DC Resistance: .08 ohm; Rated Current: 2.1 A; Minimum Operating Temperature: -55 Cel; Mounting Type: SURFACE MOUNT; No. of Functions: 1;
BKP1005HS221-TV
Taiyo Yuden
Taiyo Yuden's BKP1005HS221-TV is a FERRITE CHIP filter with 2 terminals, rated for 0.8A current. With dimensions of L1.0XB0.5XH0.5 (mm), it offers an output impedance of 220 OHM and max operating temperature of 125°C. Ideal for data line filtering in surface mount applications due to its compact size and high resistance capabilities.
MMZ1608B601CTDH5
TDK's MMZ1608B601CTDH5 is a chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min of -55°C. With an output impedance of 600 ohms, it is ideal for automotive applications due to its AEC-Q200 screening level.
742792151
Wurth Elektronik 742792151 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has 100-600 MHz frequency range, and 70 OHM output impedance. Ideal for surface mount applications in electronics for noise suppression.
ILHB1206ER121V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .02 ohm; Rated Current: 6 A; Width (mm): 1.6; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Maximum Operating Temperature: 125 Cel;
742792031
Wurth Elektronik 742792031 is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L2.0XB1.25XH0.9 (mm), it operates b/w -55 to 125 °C and has an output impedance of 300 OHM. Ideal for data line filtering applications due to its surface mount construction and frequency range of 100-200 MHz.
DLM11SN900HY2L
Murata's DLM11SN900HY2L is a Data Line Filter with 2 functions, rated at 5V. It offers a min insulation resistance of 100 Mohm and operates b/w -40 to 85 °C. Ideal for applications requiring filtering in data lines due to its compact dimensions of L1.25xB1.0xH0.5 mm and surface mounting type.
BLM31PG121SH1L
Murata's BLM31PG121SH1L is a chip bead data line filter with AEC-Q200 screening. Featuring 120 OHM output impedance, it operates b/w -55 to 125 °C and has a DC resistance of 0.02 ohm. Ideal for surface mount applications in automotive electronics due to its compact size and high-rated current of 3 A.
74279265
Wurth Elektronik 74279265 is a 0603 multi-layer FERRITE CHIP filter with dimensions of L1.6xB0.8xH0.8 mm. It has a max operating temp of 125°C, min freq of 100 MHz, and DC resistance of 0.45 ohm. Ideal for data line filtering applications due to its surface mounting type and ferrite material construction.
FLT007A0Z
Ge Power Electronics
DATA LINE FILTER MODULE; Rated Current: 7 A; Height: 12.2 mm; No. of Terminals: 5; Length: 25.41 mm; No. of Functions: 2;
BLM31SN500SN1L
Murata Manufacturing's BLM31SN500SN1L is a FERRITE CHIP filter with 2 terminals, rated for 10A current. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55 to 125 °C and has a max DC resistance of 0.0021 ohm. Ideal for data line filtering applications due to its 50 OHM output impedance and surface mounting type.
IP4256CZ5-W,115
Nexperia
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Rated Voltage: 5.6 V; Length: 1.7 mm; No. of Functions: 1; Approvals (V): IEC;
ACF321825-471-TD01
TDK ACF321825-471-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 180 MHz. It offers 1000 Mohm insulation resistance, rated voltage of 20 V, and 0.15 ohm max DC resistance. Ideal for data line filtering in surface mount applications due to its compact dimensions (L3.2XB1.8XH2.5 mm).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
744232090
Wurth Elektronik
Wurth Elektronik 744232090 Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 125°C. Ideal for applications requiring surface mount filters with dimensions L3.2xB1.6xH1.9mm in tape and reel packaging.
744242220
Wurth Elektronik 744242220 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 22uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.23 ohm. Ideal for applications requiring filtering on data lines with UL approval.
744231091
Wurth Elektronik 744231091 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has 4 terminals, tin finish, and dimensions of L2.0xB1.2xH1.2 (mm). Ideal for applications requiring filtering in data lines with a current rating of 0.37A.
744227S
744227S by Wurth Elektronik is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.16 ohm, and output impedance of 5500 ohm. Ideal for surface mount applications requiring a compact L9.2xB6.0xH5.0mm size and rated current of 1A.
744222
Wurth Elektronik 744222 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 1000uH and max DC resistance of 0.31 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0mm, such as electronic devices needing noise suppression on data lines.
744230900
Wurth Elektronik 744230900 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. Ideal for surface mount applications, it has dimensions of L1.6xB0.85xH1.1 (mm) and output impedance of 90 ohm.
744232222
Wurth Elektronik 744232222 is a Data Line Filter with 2 functions, rated at 50V. It has 4 terminals and operates b/w -40 to 125°C. With dimensions of L3.2xB1.6xH1.9 (mm), it offers an output impedance of 2200Ω and max DC resistance of 1.2Ω, suitable for surface mount applications in various electronic devices.
744227
Wurth Elektronik 744227 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. Ideal for applications requiring surface mount filters with dimensions of L9.2xB6.0xH5.0mm, it operates b/w -40°C to 125°C and has a max DC resistance of 0.16 ohm.
744226S
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: 1.6 A; Output Impedance (ohm): 920 OHM; Width (mm): 6.0; No. of Terminals: 4;
744242510
Wurth Elektronik 744242510 is a Data Line Filter with UL approval, rated voltage of 80V, and inductance of 51uH. It has 2 functions, operates b/w -40°C to 125°C, and offers a max DC resistance of 0.32 ohm. This filter is ideal for applications requiring noise suppression in data lines.
744272471
DATA LINE FILTER; Maximum DC Resistance: .065 ohm; Rated Current: 1.6 A; Mounting Type: SURFACE MOUNT; Length: 10 mm; Packing Method: TAPE AND REEL;
744223
Wurth Elektronik 744223 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 500uH and max DC resistance of 0.15 ohm, it's ideal for applications requiring output impedance of 3300 OHM. This surface mount filter operates b/w -40 to 125 °C, making it suitable for various electronic devices.
744273501
Wurth Elektronik 744273501 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 5uH. It operates b/w -40°C to 125°C, has Tin/Copper terminals, and dimensions of L9.5xB8.3xH5.3mm. Ideal for applications requiring a max current of 5A and output impedance of 500Ω in surface mount configurations.
744224
Wuerth Elektronik & Kg 744224 Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 250uH. UL approved for applications requiring output impedance of 1800 ohm and rated current of 1.2A. Ideal for surface mount installations in electronics to filter data lines efficiently.
744220203
Wurth Elektronik 744220203 is a Data Line Filter with 2 functions and rated voltage of 80V. It has inductance of 20000uH, max operating temp of 125°C, and DC resistance of 2.6 ohm. Ideal for applications requiring noise suppression in data lines with approval from IEC standards.
744226
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: 1.6 A; Width (mm): 6.0; No. of Functions: 2; Inductance: 10 uH;
744220103
DATA LINE FILTER; Maximum DC Resistance: 1.2 ohm; Rated Current: .35 A; No. of Terminals: 4; Packing Method: TR, EMBOSSED, 13 INCH; Height: 5 mm;
744231371
DATA LINE FILTER; Maximum DC Resistance: .45 ohm; Rated Current: .28 A; Terminal Finish: Tin (Sn); Rated Voltage: 50 V; No. of Terminals: 4;
744272121
Wurth Elektronik 744272121 is a Data Line Filter with 2 functions, rated at 80V. It has inductance of 120uH and operates b/w -40 to 125°C. Ideal for applications requiring filtering of data lines, it offers low DC resistance of 0.025 ohm and output impedance of 460Ω.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved