Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NUF2114MNT1G by Onsemi is a Data Line Filter with 2 functions and 8 terminals. It has a max operating temperature of 85°C, DC resistance of 9.9 ohm, and output impedance of 50 ohm. Ideal for applications requiring data line filtering in compact spaces.
Median Price
$0.706
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
$0.396
100+ parts
-
1k+ parts
10k+ parts
Farnell
$0.432
$0.404
DigiKey
$0.910
$0.601
$0.491
Newark
$1.040
$0.737
$0.629
$0.604
Mouser Electronics
$1.100
$0.656
$0.466
$0.409
Chip1Stop
$3.810
$1.210
$0.828
Rochester
$0.485
$0.403
$0.359
Element14
$0.574
$0.476
$0.428
Verical
$0.390
Digiode
$0.374
Nova Conductors
$0.530
Vyrian
Flip Electronics
IBS Electronics
NAC Semi
$0.554
Chip Stock
Semicontronic
$0.335
$0.327
$0.325
Ampacity Inc.
Corphita
$0.355
Corohmni
$0.394
Advanced Electronics
$0.502
$0.477
Argo Parts USA
$0.514
Netroflash
$0.503
$0.492
Continental Prestige Electronics
$0.823
$0.442
$0.366
$0.316
Aztec Data Supply Inc.
$1.310
Authorized Procurement Solutions
GreenTree Electronics
Kepictronics
TANS Electronics
Problanco Electronics
Futuretech Components
Lixinc
Kulean Microsystems
SupplyDigital Components
UHIMA Technologies
Formix International (Excess)
Having IEC approval ensures that the product meets international standards for safety and performance.
Having 2 functions allows for effective filtering of data lines, providing reliable data transmission.
Having 8 terminals allows for secure connections and stable performance.
Being a data line filter, this product helps in reducing electromagnetic interference and noise for improved data quality.
With a maximum operating temperature of 85°C, the product can withstand high heat levels, ensuring durability.
With a minimum operating temperature of -40°C, the product remains functional in harsh cold environments.
Nickel, gold, and palladium finish ensures strong and reliable connections, preventing signal loss.
A slim width of 2.0mm makes this filter suitable for compact electronic devices.
A low DC resistance of 9.9 ohm ensures efficient power transfer and minimal energy loss.
A length of 2mm contributes to the compact design and easy integration of the filter into various devices.
An output impedance of 50 ohm helps in maintaining signal integrity and preventing reflections in data lines.
Packed in tape and reel, the product is convenient for automated assembly processes.
Surface mount design allows for easy and secure installation on PCBs.
Compact dimensions of L2.0xB2.0xH1.0 mm make it suitable for applications with space constraints.
Plastic package material provides durability and protection to the filter components.
A low height of 1mm ensures the filter can be easily accommodated in slim devices.
With a capacitance of 60uF, the filter effectively suppresses high-frequency noise and interference in data lines.
Data Line Filters NUF2114MNT1G attributes and parameters. Explore more Data Line Filters devices from Onsemi
Additional Features:
Approvals (V):
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Packing Method:
Dimensions:
Sub-Category:
Terminal Finish:
Width (mm):
NUF2114MNT1G Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Design/Specification - Lead Finish/BOM Update 10/Jul/2015
PCN Assembly/Origin - DFN Pkg Filters 18/Jun/2013
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
1554216004
Molex
WIRE AND CABLE;
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
74279277
Wuerth Elektronik & Kg
Wurth Elektronik 74279277 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.0XB0.5XH0.5 mm and output impedance of 70 OHM. Rated current is 0.5 A, making it ideal for surface mount installations in the frequency range of 100-500 MHz.
ILHB1206ER121V
Vishay Intertechnology
Vishay Intertechnology's ILHB1206ER121V is a 120 OHM FERRITE CHIP filter with 2 terminals, rated for 6A current. Ideal for data line filtering applications, it operates b/w -55 to 125 °C and has a DC resistance of 0.02 ohm. Measuring L3.2XB1.6XH1.1 (mm), it is designed for surface mount installation at frequencies up to 100 MHz.
BK1005HS102-T
Taiyo Yuden
BK1005HS102-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers a max operating temperature of 125°C and a min frequency of 100 MHz. With dimensions of L1.0xB0.5xH0.5 (mm), this filter has a max DC resistance of 0.58 ohm and an output impedance of 1000 OHM, making it suitable for high-frequency filtering tasks in electronic circuits.
PS1720P02
TDK
TDK PS1720P02 is a data line filter with max temp of 70°C and min temp of -20°C. With diameter of 17mm, it's mounted through hole and comes in tape and reel packing. Ideal for applications requiring noise suppression in data lines.
BLM18HE601SN1D
Murata Manufacturing
Murata's BLM18HE601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.25 ohm and an output impedance of 600 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BLM21PG300SN1D
BLM21PG300SN1D by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a DC resistance of 0.014 ohm, it offers output impedance of 30Ω at 100MHz. Ideal for data line filtering applications due to its compact size and high rated current of 2.3A.
74279204
Wurth Elektronik 74279204 is an AEC-Q200 rated FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with a DC resistance of 0.35 ohm and output impedance of 600 OHM. Its compact dimensions (L2.0XB1.2XH0.9 mm) make it ideal for surface mount installations in automotive electronics.
2743021447
Fair-rite Products
Fair-rite Products' 2743021447 is a chip bead data line filter with approvals from IEC. Featuring a max operating temperature of 125°C, it offers a min frequency of 10 MHz and max DC resistance of 0.0012 ohm. Ideal for applications requiring surface mount filters with dimensions L9.6XB3.05XH2.85 (mm).
74279215
Wurth Elektronik 74279215 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max operating temperature of 125°C and min frequency of 100 MHz, suitable for data line filtering applications due to its 80 OHM output impedance and surface mounting type.
HZ0805E601R-10
Laird Technologies
Laird Technologies' HZ0805E601R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 600 OHM. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 0.3 ohm and can handle up to 0.5 A rated current.
BLM21PG600SN1
Murata Manufacturing's BLM21PG600SN1 is a FERRITE CHIP data line filter with dimensions 2x1.25x0.85mm, rated current of 3A, and output impedance of 60 ohm. It operates b/w -55 to 125°C, has a max DC resistance of 0.025 ohm, and is designed for surface mount applications in electronic devices.
ACF451832-333-TD01
ACF451832-333-TD01 by TDK is a data line filter with 1 function and a rated voltage of 50V. It has a min insulation resistance of 1000 Mohm and can be used for applications requiring attenuation at max frequency of 25 dB, such as in electronic devices or communication systems.
DLW31SN601SQ2L
Murata Manufacturing's DLW31SN601SQ2L is a Data Line Filter with 2 functions, rated at 50V. It has a min insulation resistance of 10 Mohm and max operating temperature of 85°C. Ideal for applications requiring filtering in data lines, it features dimensions of L3.2xB1.6xH1.9mm and output impedance of 600 ohm.
NFA31CC102R1E4D
NFA31CC102R1E4D by Murata Manufacturing is a data line filter with 4 functions and a rated voltage of 25V. It has a capacitance of 1000uF and is commonly used in applications requiring noise suppression and EMI filtering.
744224
Wuerth Elektronik & Kg 744224 Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 250uH. UL approved for applications requiring output impedance of 1800 ohm and rated current of 1.2A. Ideal for surface mount installations in electronics to filter data lines efficiently.
1250F-003
Spectrum Control
DATA LINE FILTER; Maximum DC Resistance: .01 ohm; Rated Current: 10 A; Rated Voltage: 200 V; No. of Functions: 1; Additional Features: PI-TYPE CIRCUIT;
BLM18EG221TN1D
Murata Manufacturing's BLM18EG221TN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.5mm, it offers a DC resistance of 0.15 ohm and output impedance of 300 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications requiring a rated current of 1A in filtering electronic signals.
BLM31PG391SN1L
Murata Manufacturing's BLM31PG391SN1L is a 1206 chip bead filter with 2 terminals. It offers 390 ohm output impedance, -55 to 125°C operating temperature range, and 100 MHz frequency support. Ideal for data line filtering applications, this ferrite chip has matte tin over nickel finish and surface mounting type.
BLM18BD601SN1D
Murata Manufacturing's BLM18BD601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of 1.6x0.8x0.8 mm, it offers a max frequency of 100 MHz and DC resistance of 0.65 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 600 OHM at a rated current of 0.2 A.
NUF2450MUT2G
NUF2450MUT2G by Onsemi is a Data Line Filter with 2 functions, 8 terminals, and inductance of 0.0023 uH. It operates b/w -40 to 85 °C and has a max DC resistance of 1.7 ohm. Ideal for applications requiring data line filtering in compact dimensions (L1.8XB1.2XH0.55 mm).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NUF2101MT1G
NUF2101MT1G by Onsemi is a Data Line Filter with 6 terminals, operating b/w -55°C to 125°C. It has a max DC resistance of 33.7 ohm and capacitance of 55 uF. Ideal for surface mount applications, it comes in dimensions L3.1XB1.7XH1.1 mm and is packaged in plastic on tape and reel for ease of use.
NUF2230XV6T1G
NUF2230XV6T1G by Onsemi is a data line filter with 2 functions and 6 terminals. It has a max operating temperature of 85°C and min of -40°C. With dimensions of L1.7xB1.3xH0.6 (mm), it is ideal for surface mount applications in electronic devices.
NUF2441FCT1G
DATA LINE FILTER; Maximum DC Resistance: .35 ohm; Terminal Finish: TIN SILVER COPPER; Capacitance: 250 uF; Mounting Type: SURFACE MOUNT; Height: .7 mm;
NUF2070MNT1G
DATA LINE FILTER; Packing Method: TAPE AND REEL; Approvals (V): IEC; Package Material: PLASTIC; Terminal Finish: Tin (Sn); Maximum Operating Temperature: 85 Cel;
NUF2101MT1
DATA LINE FILTER; Maximum DC Resistance: 33.7 ohm; Length: 3.1 mm; Mounting Type: SURFACE MOUNT; Capacitance: 55 uF; Height: 1.1 mm;
NUF2101W1T1
DATA LINE FILTER; Maximum DC Resistance: 33 ohm; Manufacturer Series: NUF2101W1T1; Maximum Operating Temperature: 125 Cel; Height: 1.1 mm; Mounting Type: SURFACE MOUNT;
NUF2102UT1
DATA LINE FILTER; No. of Terminals: 16; Mounting Type: SURFACE MOUNT; Package Material: PLASTIC;
NUF2116MNT1G
DATA LINE FILTER; Terminal Finish: Nickel/Gold/Palladium (Ni/Au/Pd); Maximum Operating Temperature: 85 Cel; No. of Functions: 2; No. of Terminals: 8; Approvals (V): IEC;
NUF2220XV6T1
NUF2220XV6T1 by Onsemi is a data line filter with 2 functions and 6 terminals. It has a max operating temperature of 85°C and min of -40°C. With dimensions of L1.7xB1.3xH0.6 (mm), it is ideal for applications requiring surface mount filters with a capacitance of 7uF.
NUF2220XV6T1G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Height: .6 mm; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Package Material: PLASTIC;
NUF2222FCT1G
DATA LINE FILTER; Maximum DC Resistance: 38 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 8; Terminal Finish: Matte Tin (Sn); Capacitance: 36 uF;
NUF2230XV6T1
DATA LINE FILTER; Maximum DC Resistance: 110 ohm; Mounting Type: SURFACE MOUNT; Length: 1.7 mm; Dimensions: L1.7XB1.3XH0.6 (mm)/L0.066XB0.051XH0.023 (inch); Packing Method: TAPE AND REEL;
NUF2240W1T1G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Minimum Operating Temperature: -40 Cel; Height: 1.1 mm; Additional Features: CUT-OFF FREQUENCY 125 MHZ; Maximum Operating Temperature: 85 Cel;
NUF2441FCT1
DATA LINE FILTER; Maximum DC Resistance: .35 ohm; Packing Method: TAPE AND REEL; No. of Terminals: 6; Capacitance: 250 uF; Mounting Type: SURFACE MOUNT;
NUF2900MNT1G
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Height: 1 mm; JESD-609 Code: e3; Length: 2 mm; Package Material: PLASTIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved