Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's BLM03AG121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It has a max frequency of 100 MHz, DC resistance of 0.5 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
Median Price
$0.100
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.018
1k+ parts
$0.013
10k+ parts
$0.009
Mouser Electronics
$0.012
$0.008
TTI
-
Chip1Stop
Future Electronics
Arrow
Verical
Newark
$0.015
Nova Conductors
Bristol Electronics
$0.056
$0.028
$0.006
Dan-Mar Components
Vyrian
J2 Sourcing AB
NexGen Digital
IBS Electronics
Sea View Technologies
VNN
Prism Electronics
Argo Parts USA
Continental Prestige Electronics
Advanced Electronics
Semicontronic
$0.085
$0.083
$0.082
Aztec Data Supply Inc.
$1.730
Corohmni
$2.465
Perfect Parts
Authorized Procurement Solutions
Kepictronics
iBuyXS LLC
Chip bead construction allows for compact and efficient filtering in a small form factor, making it ideal for space-constrained applications.
Having 2 terminals provides a simple and straightforward connection setup, ensuring ease of installation.
Ferrite chip technology offers high-performance noise suppression and filtering capabilities, ensuring reliable signal quality.
With a high maximum operating temperature, this data line filter can withstand a wide range of environmental conditions without compromising its functionality.
The low minimum operating temperature ensures that the filter remains operational even in extremely cold environments.
Tin terminal finish provides corrosion resistance and ensures a secure electrical connection, contributing to the longevity of the product.
The narrow width of 0.3mm allows for easy integration into tight spaces, enabling versatile placement options.
Being able to filter frequencies as low as 100 MHz makes this data line filter suitable for a wide range of applications requiring effective noise suppression.
The low DC resistance of 0.5 ohm minimizes signal loss and ensures efficient power delivery throughout the filtering process.
The compact length of 0.6mm allows for a space-saving design, making this filter ideal for applications where size constraints are a concern.
Capable of handling frequencies up to 100 MHz, this filter provides effective noise suppression across a broad frequency range.
With an output impedance of 120 ohm, this filter helps maintain signal integrity by matching impedance levels and reducing reflections.
Tape packaging allows for easy handling, storage, and deployment of multiple filters, enhancing convenience and efficiency during production.
Surface mounting type ensures easy and secure attachment to PCBs, streamlining the assembly process and increasing reliability.
Compact dimensions make this filter suitable for small-scale applications while providing compatibility with both metric and imperial measurement systems.
With a rated current of 0.2A, this filter can safely handle moderate levels of electrical current, ensuring reliable performance in various electronic systems.
The low height profile of 0.3mm allows for a sleek and unobtrusive design, making it suitable for applications where space is limited.
Constructed from ferrite material, this filter offers excellent magnetic properties for effective noise suppression, ensuring optimal signal quality in electronic devices.
Data Line Filters BLM03AG121SN1D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
BLM03AG121SN1D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
Sangdest Microelectronics (Nanjing)
Intersil
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
ACM4520V-142-2P-T00
TDK
ACM4520V-142-2P-T00 by TDK is a data line filter with 2 functions, rated voltage of 50V, and max operating temp of 125°C. Ideal for applications requiring high output impedance and insulation resistance in compact surface mount design.
MPZ1608S101AT
TDK's MPZ1608S101AT is a 0603 chip bead filter with 2 terminals. It offers a max operating temp of 125°C and min freq of 100 MHz. Ideal for data line filtering, it has a DC resistance of 0.03 ohm and output impedance of 100 ohm, suitable for surface mount applications.
742792602
Wuerth Elektronik & Kg
Wurth Elektronik 742792602 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 60 ohm at frequencies ranging from 100 MHz to 600 MHz.
742792093
Wurth Elektronik 742792093 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C and has a DC resistance of 0.6 ohm. With dimensions of L2.0XB1.2XH0.9 (mm), it offers an output impedance of 2200 OHM at frequencies ranging from 80-100 MHz.
MPZ1608S102ATA00
TDK's MPZ1608S102ATA00 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temp of 125°C and min of -55°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 1000Ω, making it ideal for surface mount applications in various electronic devices.
744235110
Wurth Elektronik 744235110 is a Data Line Filter with 2 functions, AEC-Q200 screening. It has a rated voltage of 60V, inductance of 11uH, and max operating temp of 125°C. Ideal for applications requiring noise suppression in automotive electronics.
YFF31AH2A105MT0Y0N
YFF31AH2A105MT0Y0N by TDK is a data line filter with 100 V rated voltage, 4 A rated current, and 1000000 uF capacitance. It is ideal for automotive applications due to its AEC-Q200 screening level and compact dimensions of 1.6mm x 3.2mm x 1.3mm for surface mount installation.
7427920415
Wurth Elektronik 7427920415 is a multi-layer data line filter with FERRITE BEAD construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers 100-150 MHz frequency range. Ideal for surface mount applications in electronics to reduce electromagnetic interference at 600 OHM impedance.
MMZ1608R601ATA00
TDK MMZ1608R601ATA00 is a 0603 chip bead filter with 2 terminals. It offers max operating temp of 125°C and min of -55°C, with DC resistance of 0.4 ohm. Ideal for data line filtering applications due to its compact size and high output impedance of 600 OHM.
7427927310
7427927310 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, has a max DC resistance of 0.03 ohm, and an output impedance of 10 ohm. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
4206-001LF
Cts
4206-001LF by Cts is a Data Line Filter with 10000 Mohm Min Insulation Resistance, 500 V Rated Voltage, and 70 dB Max Insertion Loss. Ideal for applications requiring noise suppression in data lines, it has a capacitance of 3000 uF and can handle up to 25 A current at temperatures up to 125 °C.
CM5441Z161B-10
Laird Technologies
The Laird Technologies CM5441Z161B-10 is a data line filter with 2 functions and 4 terminals. It has a max DC resistance of 0.0003 ohm and an output impedance of 160 OHM, suitable for applications requiring a rated current of 75 A. This through-hole mount filter measures L13.72XB10.41XH15.24 mm and is ideal for use in electronic devices to reduce electromagnetic interference.
742792116
Wuerth Elektronik & Kg 742792116 is a FERRITE CHIP filter with 2 terminals, rated for 2.5A current and output impedance of 500 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C, with dimensions L3.2xB1.6xH1.1 mm and surface mounting type.
ACP3225-102-2P-T
Epcos Ag
DATA LINE FILTER; Maximum DC Resistance: .05 ohm; Rated Current: 1.5 A; No. of Functions: 2; Maximum Operating Temperature: 85 Cel; Height: 1.9 mm;
BLM18HE601SN1D
Murata Manufacturing
Murata's BLM18HE601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.25 ohm and an output impedance of 600 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
MPZ2012S300ATD25
MPZ2012S300ATD25 by TDK is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C, with dimensions of L2.0xB1.25xH0.85 (mm). Ideal for applications requiring a rated current of 6A and output impedance of 30 ohms in surface mount configurations.
742792064
Wurth Elektronik 742792064 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.3A current. It operates b/w -55 to 125 °C and has a max DC resistance of 0.2 ohm. Ideal for applications requiring a compact surface mount filter with 75 OHM output impedance.
SRF0905-652Y
Bourns
Bourns SRF0905-652Y is a Data Line Filter with 2 functions, rated voltage of 50V, and inductance of 6500uH. It operates b/w -40°C to 105°C, has a max DC resistance of 1.05 ohm, and output impedance of 5000 ohm. This filter is ideal for applications requiring noise suppression in data lines.
ACT45B-110-2P-TL003
The TDK ACT45B-110-2P-TL003 is a FERRITE CHIP filter with 2 functions, rated for 50V and 0.25A. With dimensions of L4.5XB3.2XH2.8 (mm), it offers high insulation resistance suitable for data line applications at temperatures ranging from -40 to 150 °C.
744223
Wurth Elektronik 744223 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 500uH and max DC resistance of 0.15 ohm, it's ideal for applications requiring output impedance of 3300 OHM. This surface mount filter operates b/w -40 to 125 °C, making it suitable for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLM03AX102SN1D
FERRITE BEAD; Construction: Chip Bead; Maximum DC Resistance: 1.25 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
BLM03AX241SN1D
FERRITE BEAD; Construction: Chip Bead; Maximum DC Resistance: .38 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .35 A;
BLM03AX601SN1D
FERRITE BEAD; Construction: Chip Bead; Maximum DC Resistance: .85 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .25 A;
BLM03HD331SN1D
Murata's BLM03HD331SN1D is a chip bead data line filter with 330 Ohm output impedance, suitable for surface mount applications. With dimensions of L0.6xB0.3xH0.3 mm, it operates b/w -55 to 125°C and supports frequencies from 100 MHz to 1 GHz, offering low DC resistance of 1 ohm for effective filtering in electronic circuits.
BLM03AG241SN1D
Murata's BLM03AG241SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 0.6x0.3x0.3mm, it offers a max DC resistance of 0.8 ohm and output impedance of 240 ohm at frequencies up to 100 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BLM03BD121SN1D
Murata's BLM03BD121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of L0.6xB0.3xH0.3 mm, it offers a max frequency of 100 MHz and DC resistance of 0.5 ohm. Ideal for surface mount applications in electronic devices requiring impedance control at 120 ohms.
BLM03HB191SN1D
BLM03HB191SN1D by Murata Manufacturing is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter is commonly used for impedance matching in electronic devices.
BLM03BD241SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .8 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
BLM03HD102SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 2.9 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .12 A;
BLM03HD471SN1D
BLM03HD471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter is commonly used for surface mount applications to reduce electromagnetic interference in data lines.
BLM03AG601SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 1.5 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .1 A;
BLM03BD471SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 1.5 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .215 A;
BLM03BD601SN1D
BLM03BD601SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used for surface mount applications to reduce noise in data lines.
BLM03BB121SN1D
BLM03HG601SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 1.6 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .15 A;
BLM03HD601SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 1.7 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .15 A;
BLM03HG102SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 2.6 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .125 A;
BLM03AG102SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 2.5 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .1 A;
BLM03AX121SN1D
FERRITE BEAD; Construction: Chip Bead; Maximum DC Resistance: .23 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .45 A;
BLM03AG121SN1B
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .5 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved