Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK's ACM2012-900-2P-T001 is a Data Line Filter with 2 functions, AEC-Q200 screening. It has a rated voltage of 50V, max operating temp of 105°C, and DC resistance of 0.19 ohm. Ideal for applications requiring noise suppression in automotive electronics.
Median Price
$0.731
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.180
100+ parts
$0.798
1k+ parts
$0.668
10k+ parts
-
Mouser Electronics
$1.210
$0.821
$0.677
$0.624
TTI Europe
$0.232
Chip1Stop
$0.730
$0.575
$0.505
Farnell
$0.667
$0.539
$0.488
Element14
$1.191
$0.744
$0.662
Future Electronics
$1.250
TTI
$0.563
Arrow
$0.679
$0.461
Verical
Newark
$0.857
$0.733
Component Electronics Inc.
$0.380
$0.290
$0.250
TME
$0.620
$0.522
$0.404
$0.236
Nova Conductors
$0.775
Maritex
$0.945
$0.216
Ozdisan Elektronik
$1.367
Chip Stock
Vyrian
Bristol Electronics
ComSIT Distribution GmbH
ComSIT USA
NAC Semi
$2.270
IBS Electronics
$1.762
Sensible Micro Corp
VNN
Semi Source
Global Solutions Electronics Company
Sea View Technologies
Connector Distribution Corp
Right Parts Inc.
Cyclops Electronics Ltd
Semtec, LLC
Avant Electronics Limited
Semicontronic
$0.197
$0.192
$0.191
Ampacity Inc.
Advanced Electronics
$0.227
$0.207
$0.186
Argo Parts USA
$0.756
Modulus Dynamics
Corohmni
Netroflash
Continental Prestige Electronics
$0.929
$0.645
$0.588
$0.496
Aztec Data Supply Inc.
$1.985
Perfect Parts
Infinite Electronics LLP (Excess)
iodParts Technologies Inc.
Kepictronics
Futuretech Components
S.R.D Solutions
Benley Electronics
GreenTree Electronics
Robosynatics
$0.741
$0.726
Lucentia Tech
Formix International (Excess)
Having 2 functions allows for better filtering and protection for data lines, making this product a reliable choice.
AEC-Q200 screening level ensures high quality and reliability, making this product suitable for automotive applications.
Rated at 50V, this product is suitable for a wide range of applications and provides adequate voltage protection.
Being a data line filter, this product effectively reduces noise and interference on data lines, ensuring data integrity.
With a high maximum operating temperature of 105°C, this product can withstand harsh environmental conditions.
Surface mount design allows for easy and secure installation on PCBs, making integration hassle-free.
Data Line Filters ACM2012-900-2P-T001 attributes and parameters. Explore more Data Line Filters devices from TDK
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Screening Level:
Width (mm):
ACM2012-900-2P-T001 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Design/Specification - ACM2012-yyy-2P-T001 material chg 02/DEC/2019
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
1N4148WT
Changzhou Galaxy Century Microelectronics
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
PIC18F4550-I/PT
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
ECMF02-2AMX6
STMicroelectronics
STMicroelectronics ECMF02-2AMX6 is a DATA LINE FILTER with 2 functions and 6 terminals. It has approvals from UL and IEC, operates b/w -40 to 85°C, with max DC resistance of 2.5 ohm. This surface mount filter is compact at L1.75xB1.55xH0.55 mm, ideal for data line filtering applications.
FCFBMJ3216HS800-T
Taiyo Yuden
Taiyo Yuden's FCFBMJ3216HS800-T is a Ferrite Chip Data Line Filter with 2 terminals, 80 Ohm output impedance, and 4A rated current. Ideal for surface mount applications, it operates b/w -40°C to 85°C, offering low DC resistance of 0.01 ohm.
BLM21PG331SN1J
Murata Manufacturing
BLM21PG331SN1J by Murata Manufacturing is a chip bead data line filter with 2 terminals and an 0805 case code. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications to provide impedance of 330 OHM at a rated current of 1 A.
LI0805H151R-10
Steward
FERRITE CHIP; Construction: Chip; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
BLM18AG121SN1D
Murata Manufacturing's BLM18AG121SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. It operates b/w -55°C to 125°C, has a DC resistance of 0.18 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
RB6122-50-0M3
Schaffner Holding Ag
RB6122-50-0M3 by Schaffner Holding Ag is a UL-approved data line filter with 600V rated voltage and 50A rated current. Featuring inductance of 250uH, it operates b/w -40°C to 125°C. Ideal for applications requiring noise suppression in data lines, it measures L61.0xB57.8xH38.0mm and has a max DC resistance of 0.0009 ohm.
NFM3DCC223R1H3L
Murata Manufacturing's NFM3DCC223R1H3L is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 22000 uF capacitance. It is a surface mount feed through capacitor used in applications requiring filtering of data lines for protection against electromagnetic interference.
BLM18PG471SZ1D
Murata Manufacturing's BLM18PG471SZ1D is a FERRITE CHIP filter with 470 OHM output impedance, suitable for data line filtering applications. With AEC-Q200 screening and 1A rated current, it operates b/w -55 to 125 °C, making it ideal for automotive electronics. This surface mount chip has 2 terminals, measures 1.6mm in length and 0.8mm in width, with a max DC resistance of 0.2 ohm.
MPZ1608S601A
TDK
TDK's MPZ1608S601A is a FERRITE CHIP filter with 2 terminals, rated for 1A current. It offers low DC resistance of 0.15 ohm and output impedance of 600 ohm. Ideal for data line filtering in applications requiring compact surface mount components.
BLM21PG221SN1D
Murata Manufacturing's BLM21PG221SN1D is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max frequency of 100MHz and DC resistance of 0.05 ohm. Ideal for data line filtering applications due to its ferrite material and output impedance of 220 ohm.
BKP1005HS221-TV
Taiyo Yuden's BKP1005HS221-TV is a FERRITE CHIP filter with 2 terminals, rated for 0.8A current. With dimensions of L1.0XB0.5XH0.5 (mm), it offers an output impedance of 220 OHM and max operating temperature of 125°C. Ideal for data line filtering in surface mount applications due to its compact size and high resistance capabilities.
NFM18PS105R0J3D
Murata Manufacturing's NFM18PS105R0J3D is a data line filter with 6.3V rated voltage, 1000000uF capacitance, and 2A rated current. It features a feed through capacitor design and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring high insulation resistance.
MI0603L221R-10
Laird Technologies
MI0603L221R-10 by Laird Technologies is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min frequency of 25 MHz. This filter is used for surface mount applications to reduce noise in data lines.
SRF0905-472Y
Bourns
Bourns SRF0905-472Y is a Data Line Filter with 2 functions, rated at 50V and inductance of 4700uH. It operates b/w -40 to 105°C, has a max DC resistance of 0.9 ohm, and output impedance of 4000 ohm. Ideal for applications requiring surface mount filters for data lines.
AWCU00453228201XTE
Yageo
Yageo AWCU00453228201XTE is a Data Line Filter with 2 functions, AEC-Q200 screening. Features 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and -40 to 125 °C Operating Temp. Ideal for automotive applications requiring noise suppression in data lines.
74279263
Wuerth Elektronik & Kg
Wurth Elektronik 74279263 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of 1.6x0.8x0.8 mm and a max frequency of 350 MHz, it offers an output impedance of 220 ohm and can handle up to 1A rated current. Ideal for surface mount installations in electronic devices requiring noise suppression on data lines.
LI0805H151R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a max frequency of 1000 MHz and output impedance of 150 OHM. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.8 A and is designed for frequencies ranging from 25 MHz to 1000 MHz.
BKP1005HS121-T8
BKP1005HS121-T8 by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of 1mm length, 0.5mm width, and 0.5mm height, it offers an output impedance of 120Ω and rated current of 1A. Ideal for surface mount applications in various electronic devices requiring noise suppression.
BLM15AX221SN1D
BLM15AX221SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L1.0XB0.5XH0.5 (mm) and is commonly used in surface mount applications for impedance matching and noise suppression in data lines.
CM5441Z161B-10
The Laird Technologies CM5441Z161B-10 is a data line filter with 2 functions and 4 terminals. It has a max DC resistance of 0.0003 ohm and an output impedance of 160 OHM, suitable for applications requiring a rated current of 75 A. This through-hole mount filter measures L13.72XB10.41XH15.24 mm and is ideal for use in electronic devices to reduce electromagnetic interference.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACM2012-900-2P-T002
TDK's ACM2012-900-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.4A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics.
ACM2520-102-2P-T002
The TDK ACM2520-102-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.2A. With dimensions of L2.5xB2.0xH1.2 (mm), it offers high insulation resistance for data line filtering applications in electronics, operating b/w -40 to 85 °C.
ACM2012H-900-2P-T05
ACM2012H-900-2P-T05 by TDK is a data line filter with 2 functions, rated voltage of 20V, and max operating temp of 85°C. It has a min insulation resistance of 10 Mohm and is ideal for applications requiring noise suppression in electronic circuits.
ACM2012-361-2P-T002
TDK's ACM2012-361-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.22A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers insulation resistance of 10 Mohm for data line applications in temperatures ranging from -40 to 85 °C.
ACM2012-201-2P-T002
ACM2012-201-2P-T002 by TDK is a FERRITE CHIP data line filter with 2 functions. It has a rated voltage of 50V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications requiring a compact size (L2.0XB1.2XH1.3 mm) and offers a min insulation resistance of 10 Mohm.
ACM2012-121-2P-T002
FERRITE CHIP; Maximum DC Resistance: .22 ohm; Rated Current: .37 A; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; No. of Functions: 2;
ACM2012-361-2P-T001
TDK's ACM2012-361-2P-T001 is a 2-function data line filter with AEC-Q200 screening. It has a rated voltage of 50V, max operating temp of 105°C, and DC resistance of 0.5 ohm. Ideal for automotive applications due to its compact size (L2.0xB1.2xH1.3 mm) and surface mounting type.
ACM2012-900-2P-TL002
TDK's ACM2012-900-2P-TL002 is a FERRITE CHIP filter with 10 Mohm insulation resistance, 50V rated voltage, and 90 OHM output impedance. Ideal for data line filtering applications due to its compact dimensions of L2.0XB1.2XH1.2 (mm) and surface mounting type.
ACM2012-121-2P-T001
TDK's ACM2012-121-2P-T001 is a data line filter with 2 functions, AEC-Q200 screening level, and 50V rated voltage. It operates b/w -40 to 105 °C and has 0.22 ohm DC resistance. Ideal for automotive applications due to its compact size of L2.0XB1.2XH1.3 (mm) and surface mounting type.
ACM2012-900-2P-TL
The TDK ACM2012-900-2P-TL is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 85°C. It has 4 terminals, DC resistance of 0.19 ohm, and output impedance of 90 ohm. Ideal for surface mount applications in electronics to filter data lines efficiently.
ACM2012D-900-2P-T00
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .3 A; Mounting Type: SURFACE MOUNT; Length: 2 mm; JESD-609 Code: e3;
ACM2012-900-2P-T
ACM2012-900-2P-T by TDK is a data line filter with 2 functions and a rated voltage of 50V. It has a max operating temperature of 85°C and is suitable for surface mount applications.
ACM2520-301-2P-T002
TDK's ACM2520-301-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.4A. With dimensions of L2.5xB2.0xH1.2 (mm), it offers insulation resistance of 10 Mohm for data line filtering applications in electronics, ensuring reliable performance from -40 to 85 °C temperatures.
ACM2012H-900-2P-T03
TDK's ACM2012H-900-2P-T03 is a data line filter with 10 Mohm min insulation resistance, 50V rated voltage, and 105°C max operating temp. Ideal for automotive applications due to AEC-Q200 screening level and compact dimensions of L2.0xB1.2xH1.2 mm.
ACM2012-900-2P
DATA LINE FILTER; Maximum DC Resistance: .19 ohm; Rated Current: .4 A; No. of Functions: 2; Dimensions: L2.0XB1.2XH1.3 (mm)/L0.079XB0.047XH0.051 (inch); Length: 2 mm;
ACM2520-801-3P-T002
ACM2520-801-3P-T002 by TDK is a FERRITE CHIP data line filter with 3 functions. It has a rated voltage of 20V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications and has dimensions of L2.5XB2.0XH1.2 (mm).
ACM2012E-121-2P-T00
DATA LINE FILTER; Maximum DC Resistance: .45 ohm; Rated Current: .3 A; Height: 1 mm; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT;
ACM-21-361M-T
Abracon
DATA LINE FILTER; Maximum DC Resistance: .4 ohm; Rated Current: .28 A; Width (mm): 1.2; Minimum Insulation Resistance: 10 Mohm; Height: 1.2 mm;
ACM2520-601-2P-T002
ACM2520-601-2P-T002 by TDK is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.3A. With dimensions of L2.5xB2.0xH1.2 (mm), it's ideal for data line filtering applications requiring high insulation resistance and low DC resistance.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved