Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ACM2012-201-2P-T002 by TDK is a FERRITE CHIP data line filter with 2 functions. It has a rated voltage of 50V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications requiring a compact size (L2.0XB1.2XH1.3 mm) and offers a min insulation resistance of 10 Mohm.
Median Price
$0.221
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Master Electronics
1+ parts
$0.210
100+ parts
-
1k+ parts
10k+ parts
$0.186
Mouser Electronics
$0.330
$0.242
$0.175
DigiKey
$0.360
$0.199
Adafruit Industries
$0.940
$0.855
$0.771
TTI Europe
$0.180
TTI
$0.162
Newark
$0.287
$0.255
Element14
$0.348
$0.336
$0.332
Chip1Stop
$0.168
Farnell
$0.215
$0.212
$0.209
Arrow
$0.181
$0.169
Verical
Nova Conductors
$0.243
Chip Stock
ComSIT USA
Bristol Electronics
Cyclops Electronics Ltd
ComSIT Distribution GmbH
Vyrian
VNN
NAC Semi
$0.240
IBS Electronics
$0.216
Atlantic Semiconductor
Elcom Components
Inventory MP
Velocity Electronics
Lantek
Prism Electronics
Contempo Components LLC
Ampacity Inc.
$0.112
Argo Parts USA
$0.203
Netroflash
$0.231
$0.226
Semicontronic
$0.244
$0.238
$0.237
Modulus Dynamics
$0.263
$0.260
$0.253
Advanced Electronics
Aztec Data Supply Inc.
$1.624
Corohmni
$3.403
Perfect Parts
Kepictronics
Authorized Procurement Solutions
Continental Prestige Electronics
$0.165
$0.163
$0.161
Futuretech Components
Glotronic Ltd.
Assy Fe
GreenTree Electronics
Robosynatics
$0.022
Lucentia Tech
High insulation resistance ensures reliable performance and minimizes the risk of electrical failures.
Having 2 functions allows for more efficient filtering of data, leading to cleaner signals and better overall performance.
Suitable for a wide range of data line applications that operate within the specified voltage range.
Ferrite chip filters are known for their high performance in filtering out unwanted noise and interference from data signals.
Can withstand high temperatures, making it suitable for use in various environments without compromising performance.
Capable of operating in low temperature conditions, providing consistent protection and filtering in extreme environments.
The use of tin, nickel, and copper terminal finish ensures good conductivity and durability for long-lasting performance.
Compact width allows for easy integration into different electronic devices without taking up much space.
Low DC resistance helps in minimizing energy loss and heat generation, improving overall efficiency.
Optimal length for effective filtering while maintaining a small footprint in the design of data line filters.
Output impedance of 200 ohms helps to match impedance levels for better signal transmission and reception.
TR packing method ensures easy handling and protection during transportation and storage, while the 7-inch size provides a sufficient quantity for various applications.
Surface mount design simplifies installation and PCB assembly, making it convenient for manufacturers to use in their products.
Compact dimensions make it suitable for small electronic devices where space is limited, without compromising on performance.
Rated for a current of 0.35 A, making it suitable for a wide range of data line applications without the risk of overload.
Low height profile enables easy integration into compact devices while providing efficient filtering capabilities.
Data Line Filters ACM2012-201-2P-T002 attributes and parameters. Explore more Data Line Filters devices from TDK
Maximum DC Resistance:
Filter Type:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
ACM2012-201-2P-T002 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
Vishay Sprague
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
BAV99-7-F
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
Meritek Electronics
742792631
Wuerth Elektronik & Kg
Wurth Elektronik 742792631 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 240 ohm at frequencies ranging from 100 MHz to 400 MHz. Ideal for surface mounting, it has a DC resistance of 0.4 ohm and rated current of 0.2 A.
ACT45B-101-2P-TL003
TDK
TDK's ACT45B-101-2P-TL003 is a FERRITE CHIP filter with 100uH inductance, 1.5ohm DC resistance, and 50V rated voltage. Ideal for data line filtering applications due to its compact dimensions of L4.5xB3.2xH2.8mm and surface mounting type capability.
BLM18AG121SN1D
Murata Manufacturing
Murata Manufacturing's BLM18AG121SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. It operates b/w -55°C to 125°C, has a DC resistance of 0.18 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
742863160
Wurth Elektronik 742863160 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.5A. It has a max operating temperature of 125°C and min of -55°C. Ideal for IEC-approved applications requiring output impedance of 600Ω in a compact size of L1.6xB0.8xH0.8mm.
744242471
Wurth Elektronik 744242471 is a Data Line Filter with UL approval, rated at 80V. It features 2 functions, inductance of 470uH, and max operating temp of 125°C. Ideal for applications requiring filtering in data lines with surface mounting type.
MMZ2012R102AT
The TDK MMZ2012R102AT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.3 ohm and output impedance of 1000 OHM, suitable for surface mount applications in various electronic devices.
FBMJ1608HS220NTR
Taiyo Yuden
Taiyo Yuden's FBMJ1608HS220NTR is a chip bead data line filter with dimensions 1.6x0.8x0.8mm, suitable for surface mount applications. Featuring a max operating temperature of 125°C and rated current of 7.5A, it offers a min frequency of 100MHz and max DC resistance of 0.004 ohm, making it ideal for noise suppression in electronic circuits.
PA4339.102NLT
Pulse Electronics
PA4339.102NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 8uH and operates b/w -40°C to 125°C. Ideal for applications requiring surface mount filters with a max current rating of 3A.
28F0121-0SR-10
Laird Technologies
Laird Technologies' 28F0121-0SR-10 is a chip bead data line filter with FERRITE CHIP technology. It operates b/w -45°C to 125°C, has a DC resistance of 0.0007 ohm, and an output impedance of 48 OHM. Ideal for surface mount applications in electronics requiring noise suppression up to 800 MHz.
BLM21PG221SN1B
BLM21PG221SN1B by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max frequency of 100MHz and DC resistance of 0.05 ohm. Ideal for data line filtering applications due to its ferrite chip construction and output impedance of 220 ohm at rated current of 2A.
CM1402-03CP
CM1402-03CP by Onsemi is a data line filter with 5 functions and 10 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This surface mount filter has dimensions of L2.005XB1.375XH0.714 (mm) and is suitable for applications requiring a capacitance of 20 uF and an output impedance of 50 ohm.
ACM2012-900-2P-TL
The TDK ACM2012-900-2P-TL is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 85°C. It has 4 terminals, DC resistance of 0.19 ohm, and output impedance of 90 ohm. Ideal for surface mount applications in electronics to filter data lines efficiently.
MMZ2012S121AT000
MMZ2012S121AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.15 ohm and output impedance of 120 ohm, suitable for surface mount applications in electronics to suppress electromagnetic interference.
BKP1005HS121-T8
BKP1005HS121-T8 by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of 1mm length, 0.5mm width, and 0.5mm height, it offers an output impedance of 120Ω and rated current of 1A. Ideal for surface mount applications in various electronic devices requiring noise suppression.
BLM18EG221SN1D
Murata Manufacturing's BLM18EG221SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.05 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 260 ohm at frequencies ranging from 100 MHz to 1000 MHz.
MPZ1608S221AT
The TDK MPZ1608S221AT is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1.6x0.8x0.8mm, it offers a max operating temperature of 125°C and DC resistance of 0.05 ohm. This ferrite chip filter has an output impedance of 220 ohm and is suitable for frequencies ranging from 100 MHz, making it perfect for noise suppression in electronic circuits.
EMI2121MTTAG
EMI2121MTTAG by Onsemi is a Data Line Filter with 8 terminals, rated for 0.1A current. With a compact size of L2.2xB2.0xH0.8mm, it offers an output impedance of 50 ohms and capacitance of 0.8uF. Ideal for IEC-approved applications requiring surface mount filters in data lines.
BLM21BB750SN1D
Murata Manufacturing's BLM21BB750SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a DC resistance of 0.16 ohm and output impedance of 75 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
NFM21CC223R1H3D
Murata Manufacturing's NFM21CC223R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 22000 uF capacitance. It is a feed-through capacitor suitable for applications requiring filtering in temperatures ranging from -55 to 125 °C.
MI0603L221R-10
MI0603L221R-10 by Laird Technologies is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min frequency of 25 MHz. This filter is used for surface mount applications to reduce noise in data lines.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACM2012-900-2P-T002
TDK's ACM2012-900-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.4A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics.
ACM2012-900-2P-T001
TDK's ACM2012-900-2P-T001 is a Data Line Filter with 2 functions, AEC-Q200 screening. It has a rated voltage of 50V, max operating temp of 105°C, and DC resistance of 0.19 ohm. Ideal for applications requiring noise suppression in automotive electronics.
ACM2520-102-2P-T002
The TDK ACM2520-102-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.2A. With dimensions of L2.5xB2.0xH1.2 (mm), it offers high insulation resistance for data line filtering applications in electronics, operating b/w -40 to 85 °C.
ACM2012H-900-2P-T05
ACM2012H-900-2P-T05 by TDK is a data line filter with 2 functions, rated voltage of 20V, and max operating temp of 85°C. It has a min insulation resistance of 10 Mohm and is ideal for applications requiring noise suppression in electronic circuits.
ACM2012-361-2P-T002
TDK's ACM2012-361-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.22A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers insulation resistance of 10 Mohm for data line applications in temperatures ranging from -40 to 85 °C.
ACM2012-121-2P-T002
FERRITE CHIP; Maximum DC Resistance: .22 ohm; Rated Current: .37 A; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; No. of Functions: 2;
ACM2012-361-2P-T001
TDK's ACM2012-361-2P-T001 is a 2-function data line filter with AEC-Q200 screening. It has a rated voltage of 50V, max operating temp of 105°C, and DC resistance of 0.5 ohm. Ideal for automotive applications due to its compact size (L2.0xB1.2xH1.3 mm) and surface mounting type.
ACM2012-900-2P-TL002
TDK's ACM2012-900-2P-TL002 is a FERRITE CHIP filter with 10 Mohm insulation resistance, 50V rated voltage, and 90 OHM output impedance. Ideal for data line filtering applications due to its compact dimensions of L2.0XB1.2XH1.2 (mm) and surface mounting type.
ACM2012-121-2P-T001
TDK's ACM2012-121-2P-T001 is a data line filter with 2 functions, AEC-Q200 screening level, and 50V rated voltage. It operates b/w -40 to 105 °C and has 0.22 ohm DC resistance. Ideal for automotive applications due to its compact size of L2.0XB1.2XH1.3 (mm) and surface mounting type.
ACM2012D-900-2P-T00
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .3 A; Mounting Type: SURFACE MOUNT; Length: 2 mm; JESD-609 Code: e3;
ACM2012-900-2P-T
ACM2012-900-2P-T by TDK is a data line filter with 2 functions and a rated voltage of 50V. It has a max operating temperature of 85°C and is suitable for surface mount applications.
ACM2520-301-2P-T002
TDK's ACM2520-301-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.4A. With dimensions of L2.5xB2.0xH1.2 (mm), it offers insulation resistance of 10 Mohm for data line filtering applications in electronics, ensuring reliable performance from -40 to 85 °C temperatures.
ACM2012H-900-2P-T03
TDK's ACM2012H-900-2P-T03 is a data line filter with 10 Mohm min insulation resistance, 50V rated voltage, and 105°C max operating temp. Ideal for automotive applications due to AEC-Q200 screening level and compact dimensions of L2.0xB1.2xH1.2 mm.
ACM2012-900-2P
DATA LINE FILTER; Maximum DC Resistance: .19 ohm; Rated Current: .4 A; No. of Functions: 2; Dimensions: L2.0XB1.2XH1.3 (mm)/L0.079XB0.047XH0.051 (inch); Length: 2 mm;
ACM2520-801-3P-T002
ACM2520-801-3P-T002 by TDK is a FERRITE CHIP data line filter with 3 functions. It has a rated voltage of 20V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications and has dimensions of L2.5XB2.0XH1.2 (mm).
ACM2012E-121-2P-T00
DATA LINE FILTER; Maximum DC Resistance: .45 ohm; Rated Current: .3 A; Height: 1 mm; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT;
ACM-21-361M-T
Abracon
DATA LINE FILTER; Maximum DC Resistance: .4 ohm; Rated Current: .28 A; Width (mm): 1.2; Minimum Insulation Resistance: 10 Mohm; Height: 1.2 mm;
ACM2520-601-2P-T002
ACM2520-601-2P-T002 by TDK is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.3A. With dimensions of L2.5xB2.0xH1.2 (mm), it's ideal for data line filtering applications requiring high insulation resistance and low DC resistance.
ACM2012-201-2P-TL
DATA LINE FILTER; Maximum DC Resistance: .25 ohm; Rated Current: .35 A; No. of Functions: 2; Minimum Operating Temperature: -25 Cel; Rated Voltage: 50 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved