Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ACM2012-900-2P-T by TDK is a data line filter with 2 functions and a rated voltage of 50V. It has a max operating temperature of 85°C and is suitable for surface mount applications.
Median Price
$0.195
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Avnet
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.171
RS (Exports)
$0.219
Component Electronics Inc.
$0.540
$0.400
$0.350
VNN
TME
$0.214
$0.182
$0.167
SPM Sales
Speed Components Ltd
ACDS - Activité Composants Distribution Service
Vyrian
NexGen Digital
Bristol Electronics
Prism Electronics
A&K Electronics
Rotakorn
Nova Conductors
Atlantic Semiconductor
QIE Inc.
Semtec, LLC
NPI Materials, Inc.
Elcom Components
Ampacity Inc.
$0.186
Advanced Electronics
$2.761
$2.623
Argo Parts USA
Authorized Procurement Solutions
Continental Prestige Electronics
Cyclops Electronics Ltd (Excess)
Kepictronics
Assy Fe
Glotronic Ltd.
GreenTree Electronics
Bastille Electronics
2 - This product offers two functions, making it versatile and capable of handling various data line filtering requirements.
50 V - With a high rated voltage, this product can effectively handle data line filtering for devices with higher voltage requirements.
4 - The four terminals of this product allow for easy and secure connections, ensuring a reliable data line filtering solution.
DATA LINE FILTER - This filter type specifically targets data line interference, making it an excellent choice for maintaining data integrity and reducing signal noise.
85 °C - With a maximum operating temperature of 85°C, this product can withstand demanding environments without compromising its filtering capabilities.
25 °C - This product remains effective even under extremely low temperatures, making it suitable for various applications in different climates.
Matte Tin (Sn) - with Nickel (Ni) barrier - The matte tin finish, along with a nickel barrier, provides excellent electrical conductivity and corrosion resistance for long-term reliability.
1.2 - The compact width of 1.2mm allows for easy integration into space-constrained systems, making it ideal for applications with size limitations.
0.19 ohm - With a low maximum DC resistance, this product minimizes signal loss and ensures efficient data transmission through the filtered line.
2 mm - The small length of 2mm adds to the overall compactness and ease of installation, making it a practical choice for various equipment designs.
90 OHM - The output impedance of 90 ohms helps to match impedance levels and maintain signal integrity, making it an excellent choice for high-quality data transmission.
TAPE AND REEL - This packing method allows for convenient handling and automated assembly, ensuring faster production processes and reducing labor costs.
SURFACE MOUNT - The surface mount capability of this product simplifies the installation process and enables placement on printed circuit boards, enhancing overall design flexibility.
L2.0XB1.2XH1.3 (mm)/L0.079XB0.047XH0.051 (inch) - The compact dimensions of this product make it suitable for applications with tight space constraints, providing a versatile solution without sacrificing performance.
0.4 A - With a rated current of 0.4 A, this product can handle moderate power requirements, making it suitable for a wide range of data line applications.
1.3 mm - The low height of 1.3mm ensures compatibility with slim designs while maintaining the necessary filtering capabilities, making it an excellent choice for space-restricted environments.
Data Line Filters ACM2012-900-2P-T attributes and parameters. Explore more Data Line Filters devices from TDK
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
ACM2012-900-2P-T Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
Semiconductors
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
CRCW06030000Z0EAHP
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
Philips Semiconductors
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
LM358D-T
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMZ2012Y202BTD25
TDK
MMZ2012Y202BTD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP construction, it has 2 terminals and operates b/w -55 to 125 °C. With a max DC resistance of 0.5 ohm, it is ideal for automotive applications requiring an output impedance of 2000 OHM.
742792093
Wuerth Elektronik & Kg
Wurth Elektronik 742792093 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C and has a DC resistance of 0.6 ohm. With dimensions of L2.0XB1.2XH0.9 (mm), it offers an output impedance of 2200 OHM at frequencies ranging from 80-100 MHz.
BLM18SG121TN1D
Murata Manufacturing
Murata Manufacturing's BLM18SG121TN1D is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, offering 120 ohm output impedance at 100MHz frequency. Ideal for surface mount applications requiring effective filtering in compact spaces.
BLM15AG102SN1D
Murata Manufacturing's BLM15AG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.0XB0.5XH0.5 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.65 ohm, suitable for surface mount applications in electronics for impedance matching and noise suppression.
MPZ2012S331AT
TDK's MPZ2012S331AT is an 0805 chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for surface mount applications, it has a DC resistance of 0.05 ohm and output impedance of 330 ohm, suitable for noise suppression in electronic circuits.
2463-002-X5S0-471M
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 10 A; Manufacturer Series: 2463-002; Diameter (mm): 2.51; Dimensions: D2.51XL3.94 (mm)/D0.099XL0.155 (inch); Mounting Type: THROUGH HOLE MOUNT;
HF70ACC575032-T
The TDK HF70ACC575032-T is a chip bead data line filter with 2 terminals, operating b/w -40 to 125°C. With dimensions of L5.7xB5.0xH3.2 mm, it offers a max DC resistance of 0.04 ohm and output impedance of 300 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter is commonly used in electronic devices requiring noise suppression on data lines.
742792651
Wurth Elektronik 742792651 is a surface mount data line filter with AEC-Q200 screening. Featuring multi-layer construction, it has 2 terminals and FERRITE BEAD filter type. With dimensions of L1.6xB0.8xH0.8 mm, it operates b/w -55 to 125°C and offers an output impedance of 600 ohm for applications requiring noise suppression in automotive electronics.
ACM2012H-900-2P-T03
TDK's ACM2012H-900-2P-T03 is a data line filter with 10 Mohm min insulation resistance, 50V rated voltage, and 105°C max operating temp. Ideal for automotive applications due to AEC-Q200 screening level and compact dimensions of L2.0xB1.2xH1.2 mm.
HI1206T500R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
DSS1NB32A103Q91A
Murata Manufacturing's DSS1NB32A103Q91A is a 3-terminal data line filter with 1000 Mohm insulation resistance, 100 V rated voltage, and 6 A rated current. It operates b/w -40 to 85 °C and has a capacitance of 10000 uF. Ideal for applications requiring noise suppression in data lines.
7448229004
7448229004 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 350uH, making it suitable for applications requiring noise suppression in data lines.
742792062
Wurth Elektronik 742792062 is an 0805 multi-layer ferrite chip data line filter with dimensions of L2.0xB1.2xH0.9 (mm). It has a max operating temperature of 125°C and min frequency of 100 MHz, suitable for surface mount applications in electronic circuits requiring noise suppression up to 400 MHz.
BLM18SG121TN1J
BLM18SG121TN1J by Murata Manufacturing is a chip bead data line filter with 2 terminals and a case code of 0603. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used for noise suppression in electronic circuits.
ACM2012D-900-2P-T00
TDK's ACM2012D-900-2P-T00 is a FERRITE CHIP filter with 10 Mohm insulation resistance, 20V rated voltage, and 0.3A rated current. Ideal for data line applications due to its compact dimensions of L2.0xB1.2xH1.2 (mm) and surface mounting type.
ACM9070-701-2PL-TL
ACM9070-701-2PL-TL by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and insulation resistance of 10 Mohm. It operates b/w -25 to 85 °C and has a DC resistance of 0.01 ohm. Ideal for applications requiring filtering in data lines with surface mounting type.
4700-008LF
Cts
Cts 4700-008LF is a Data Line Filter with 100V rated voltage, 0.1uH inductance, and 70dB max insertion loss. Ideal for applications requiring high insulation resistance, such as data transmission systems or electronic devices. Dimensions: L8XB2.29XH2.29 (mm), Mounting Type: SURFACE MOUNT.
MPZ1608B471ATD25
MPZ1608B471ATD25 by TDK is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it's ideal for applications requiring a 470 OHM output impedance in surface mount configurations up to 1A rated current.
BLM18KG471SN1D
Murata Manufacturing's BLM18KG471SN1D is a chip bead data line filter with 470 OHM output impedance, suitable for surface mount applications. With dimensions of 1.6x0.8x0.8 mm and rated current of 1.5 A, it operates b/w -55 to 125 °C, making it ideal for noise suppression in electronic circuits up to 100 MHz frequency range.
NFM18CC222R1C3D
Murata Manufacturing's NFM18CC222R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 2200uF capacitance. It is a feed through capacitor suitable for applications requiring filtering of electrical signals in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACM2012-900-2P-T002
TDK's ACM2012-900-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.4A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics.
ACM2012-900-2P-T001
TDK's ACM2012-900-2P-T001 is a Data Line Filter with 2 functions, AEC-Q200 screening. It has a rated voltage of 50V, max operating temp of 105°C, and DC resistance of 0.19 ohm. Ideal for applications requiring noise suppression in automotive electronics.
ACM2520-102-2P-T002
The TDK ACM2520-102-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.2A. With dimensions of L2.5xB2.0xH1.2 (mm), it offers high insulation resistance for data line filtering applications in electronics, operating b/w -40 to 85 °C.
ACM2012H-900-2P-T05
ACM2012H-900-2P-T05 by TDK is a data line filter with 2 functions, rated voltage of 20V, and max operating temp of 85°C. It has a min insulation resistance of 10 Mohm and is ideal for applications requiring noise suppression in electronic circuits.
ACM2012-361-2P-T002
TDK's ACM2012-361-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.22A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers insulation resistance of 10 Mohm for data line applications in temperatures ranging from -40 to 85 °C.
ACM2012-201-2P-T002
ACM2012-201-2P-T002 by TDK is a FERRITE CHIP data line filter with 2 functions. It has a rated voltage of 50V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications requiring a compact size (L2.0XB1.2XH1.3 mm) and offers a min insulation resistance of 10 Mohm.
ACM2012-121-2P-T002
FERRITE CHIP; Maximum DC Resistance: .22 ohm; Rated Current: .37 A; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; No. of Functions: 2;
ACM2012-361-2P-T001
TDK's ACM2012-361-2P-T001 is a 2-function data line filter with AEC-Q200 screening. It has a rated voltage of 50V, max operating temp of 105°C, and DC resistance of 0.5 ohm. Ideal for automotive applications due to its compact size (L2.0xB1.2xH1.3 mm) and surface mounting type.
ACM2012-900-2P-TL002
TDK's ACM2012-900-2P-TL002 is a FERRITE CHIP filter with 10 Mohm insulation resistance, 50V rated voltage, and 90 OHM output impedance. Ideal for data line filtering applications due to its compact dimensions of L2.0XB1.2XH1.2 (mm) and surface mounting type.
ACM2012-121-2P-T001
TDK's ACM2012-121-2P-T001 is a data line filter with 2 functions, AEC-Q200 screening level, and 50V rated voltage. It operates b/w -40 to 105 °C and has 0.22 ohm DC resistance. Ideal for automotive applications due to its compact size of L2.0XB1.2XH1.3 (mm) and surface mounting type.
ACM2012-900-2P-TL
The TDK ACM2012-900-2P-TL is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 85°C. It has 4 terminals, DC resistance of 0.19 ohm, and output impedance of 90 ohm. Ideal for surface mount applications in electronics to filter data lines efficiently.
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .3 A; Mounting Type: SURFACE MOUNT; Length: 2 mm; JESD-609 Code: e3;
ACM2520-301-2P-T002
TDK's ACM2520-301-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.4A. With dimensions of L2.5xB2.0xH1.2 (mm), it offers insulation resistance of 10 Mohm for data line filtering applications in electronics, ensuring reliable performance from -40 to 85 °C temperatures.
ACM2012-900-2P
DATA LINE FILTER; Maximum DC Resistance: .19 ohm; Rated Current: .4 A; No. of Functions: 2; Dimensions: L2.0XB1.2XH1.3 (mm)/L0.079XB0.047XH0.051 (inch); Length: 2 mm;
ACM2520-801-3P-T002
ACM2520-801-3P-T002 by TDK is a FERRITE CHIP data line filter with 3 functions. It has a rated voltage of 20V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications and has dimensions of L2.5XB2.0XH1.2 (mm).
ACM2012E-121-2P-T00
DATA LINE FILTER; Maximum DC Resistance: .45 ohm; Rated Current: .3 A; Height: 1 mm; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT;
ACM-21-361M-T
Abracon
DATA LINE FILTER; Maximum DC Resistance: .4 ohm; Rated Current: .28 A; Width (mm): 1.2; Minimum Insulation Resistance: 10 Mohm; Height: 1.2 mm;
ACM2520-601-2P-T002
ACM2520-601-2P-T002 by TDK is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.3A. With dimensions of L2.5xB2.0xH1.2 (mm), it's ideal for data line filtering applications requiring high insulation resistance and low DC resistance.
ACM2012-361-2P
DATA LINE FILTER; Maximum DC Resistance: .5 ohm; Rated Current: .22 A; Minimum Operating Temperature: -25 Cel; Height: 1.3 mm; Rated Voltage: 50 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved