Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata's BLM03AG601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 0.6x0.3x0.3mm, it offers a max DC resistance of 1.5 ohm and output impedance of 600 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter is commonly used in electronic devices requiring noise suppression on data lines.
Median Price
$0.014
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Arrow
1+ parts
$0.038
100+ parts
$0.005
1k+ parts
$0.003
10k+ parts
DigiKey
$0.100
$0.018
$0.013
$0.009
Mouser Electronics
$0.012
$0.008
Chip1Stop
-
$0.007
$0.004
Element14
$0.011
TTI
Future Electronics
Verical
$0.010
Farnell
Newark
$0.015
DF Sales Co.
Nova Conductors
Bristol Electronics
$0.056
$0.028
$0.006
Maritex
$0.087
Vyrian
Dan-Mar Components
Connector Distribution Corp
Right Parts Inc.
R&J Components
Cyclops Electronics Ltd
VNN
Prism Electronics
ComSIT Distribution GmbH
Semicontronic
Aranea Global
Argo Parts USA
Aztec Data Supply Inc.
$1.350
Advanced Electronics
$1.500
$1.365
$1.230
Corohmni
$3.139
Perfect Parts
Kepictronics
Futuretech Components
Continental Prestige Electronics
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
$0.254
$0.235
Chip beads are known for their compact size and efficient filtering capabilities, making this product suitable for applications where space is limited.
Having 2 terminals simplifies the installation process and ensures secure connections for reliable performance.
Ferrite chip filters are effective in suppressing electromagnetic interference, making this product ideal for noise reduction in electronic circuits.
With a high maximum operating temperature, this data line filter can withstand harsh environmental conditions without compromising its functionality.
The wide range of operating temperatures ensures that this filter can be used in various environments without performance issues.
Tin terminal finish provides good conductivity and corrosion resistance, enhancing the longevity and reliability of this filter.
The slim width of this filter allows for easy integration into compact electronic devices or circuit layouts.
Capable of filtering frequencies as low as 100 MHz, this filter is effective in reducing noise and interference in electronic signals within this range.
With a low DC resistance, this filter minimizes power loss and ensures efficient signal transmission in the circuit.
The short length of this filter contributes to its compact design, making it suitable for applications where space is a premium.
The maximum frequency handling capability of 100 MHz enables this filter to effectively suppress high-frequency electromagnetic interference.
The output impedance of 600 ohms ensures compatibility with a wide range of electronic devices and circuits, providing effective noise reduction.
Packaged in tape form for easy handling and automated assembly processes, simplifying the manufacturing and installation of electronic devices.
Surface mount technology enables easy and secure installation of this filter on circuit boards, reducing assembly time and ensuring reliable connections.
The compact dimensions of this filter make it suitable for small electronic devices while offering compatibility with standard industry sizes for easy integration.
Rated for a current of 0.1 A, this filter is suitable for low-power applications where efficient noise suppression is required.
The low height profile of this filter allows for versatile installation options in various electronic devices and circuits.
Constructed with ferrite material, known for its high magnetic permeability and noise suppression capabilities, ensuring effective filtering performance.
Data Line Filters BLM03AG601SN1D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
BLM03AG601SN1D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
Dc Components
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
Semitron
Db Lectro
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
NFM3DCC221R1H3L
Murata Manufacturing
Murata Manufacturing's NFM3DCC221R1H3L is a data line filter with 220uF capacitance, 50V rated voltage, and 0.3A rated current. It features feed through capacitor type and is ideal for applications requiring noise filtering in electronic circuits.
NFM41PC204F1H3L
Murata Manufacturing's NFM41PC204F1H3L is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 200000 uF capacitance. It is a feed through capacitor used in applications requiring surface mount filters for noise suppression and signal conditioning.
FBMH3225HM202NT
Taiyo Yuden
Taiyo Yuden's FBMH3225HM202NT is a chip bead data line filter with 2 terminals, ideal for suppressing noise in circuits. Featuring a ferrite chip construction, it offers a max operating temperature of 85°C and DC resistance of 0.13 ohm. With dimensions of L3.2xB2.5xH2.5 mm, this surface mount filter is suitable for applications requiring impedance control at frequencies up to 100 MHz.
ACM7060-301-2PL-TL01
TDK
ACM7060-301-2PL-TL01 by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has a min insulation resistance of 10 Mohm and is ideal for surface mount applications requiring output impedance of 300 ohm.
DLW43SH510XK2K
Murata Manufacturing DLW43SH510XK2K is a FERRITE CHIP filter with 51uH inductance, 10 Mohm insulation resistance, and rated for 0.23A current. It has 4 terminals, operates b/w -40 to 125 °C, and is AEC-Q200 compliant. Ideal for data line filtering applications requiring surface mount installation.
PBY201209T-601Y-N
Pulse Electronics
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
FBMJ3216HM600-T
Taiyo Yuden's FBMJ3216HM600-T is a chip bead data line filter with 2 terminals, rated for 4A current. Featuring ferrite chip construction, it offers 60 ohm output impedance and operates b/w -40 to 85°C. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
744822233
Wuerth Elektronik & Kg
Wurth Elektronik 744822233 Data Line Filter with 2 functions, rated voltage of 250V, and inductance of 3300uH. UL approved for applications requiring filtering on data lines. Operating temperature range from -40°C to 125°C makes it suitable for various electronic devices.
P0420NLT
Pulse Electronics P0420NLT is a data line filter with 2 functions, AEC-Q200 screening. It has inductance of 1320uH, max operating temp of 120°C, and rated current of 3.3A. Ideal for automotive applications due to its surface mounting type and compact dimensions (L19.56xB17.02xH9.91mm).
MPZ1608S601ATD25
TDK's MPZ1608S601ATD25 is a FERRITE CHIP data line filter with 2 terminals. It operates b/w -55 to 125 °C, has a DC resistance of 0.15 ohm, and an output impedance of 600 OHM. Ideal for surface mount applications, it measures L1.6xB0.8xH0.8 mm and can handle a rated current of 1 A.
NUF2450MUT2G
NUF2450MUT2G by Onsemi is a Data Line Filter with 2 functions, 8 terminals, and inductance of 0.0023 uH. It operates b/w -40 to 85 °C and has a max DC resistance of 1.7 ohm. Ideal for applications requiring data line filtering in compact dimensions (L1.8XB1.2XH0.55 mm).
NFM18CC223R1C3D
Murata Manufacturing's NFM18CC223R1C3D is a data line filter with 1 function, rated for 16V and 1A. Featuring FEED THROUGH CAPACITOR type, it offers high insulation resistance of 1000 Mohm. Ideal for applications requiring filtering in compact spaces with temperatures ranging from -55 to 125°C.
ILHB0805ER121V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Rated Current: 5 A; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Output Impedance (ohm): 120 OHM; No. of Functions: 1;
BLM15BB121SN1D
Murata Manufacturing's BLM15BB121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.0XB0.5XH0.5 (mm), it offers a max frequency of 100 MHz and output impedance of 120 OHM. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.3 A and DC resistance of 0.55 ohm, making it suitable for noise suppression in electronic circuits.
742792097
Wuerth Elektronik & Kg 742792097 is an AEC-Q200 rated FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of L2.0XB1.2XH0.9 (mm), it operates b/w -55 to 125 °C and has a DC resistance of 0.3 ohm at a frequency range of 70-100 MHz. Ideal for surface mounting, it offers an output impedance of 1500 OHM and can handle a rated current of 1 A efficiently.
742792021
742792021 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with dimensions of L2.0XB1.2XH0.9 (mm). It has a Max Operating Temperature of 125°C and Min Frequency of 100 MHz, suitable for surface mount applications in electronic circuits requiring noise suppression and signal filtering up to 1000 MHz.
BLM18AG601SN1
Murata Manufacturing's BLM18AG601SN1 is a FERRITE CHIP data line filter with dimensions 1.6x0.8x0.8mm, suitable for surface mount applications. It has a max DC resistance of 0.38 ohm, output impedance of 600 ohm, and can operate b/w -55 to 125°C. Ideal for noise suppression in electronic circuits requiring a rated current of 0.5A.
EMIF04-1005M8
STMicroelectronics
STMicroelectronics' EMIF04-1005M8 is a 4-function data line filter with approvals from UL and IEC. It has a rated voltage of 10V, max operating temperature of 85°C, and capacitance of 52uF. Ideal for surface mount applications requiring filtering in data lines with dimensions L1.7xB1.5xH0.6mm.
MH3261-601Y
MH3261-601Y by Bourns is a chip bead data line filter with a min insulation resistance of 0.1 Mohm. It has a max operating temperature of 125 °C and is used for surface mount applications in filtering frequencies up to 100 MHz.
FBMJ3216HS800-T
Taiyo Yuden's FBMJ3216HS800-T is a 1206 chip bead filter with 2 terminals. It operates b/w -40°C to 85°C, offering an output impedance of 80 ohm at 100 MHz frequency. Ideal for data line filtering applications due to its compact dimensions and high rated current of 4A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLM03AX102SN1D
FERRITE BEAD; Construction: Chip Bead; Maximum DC Resistance: 1.25 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
BLM03AX241SN1D
FERRITE BEAD; Construction: Chip Bead; Maximum DC Resistance: .38 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .35 A;
BLM03AX601SN1D
FERRITE BEAD; Construction: Chip Bead; Maximum DC Resistance: .85 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .25 A;
BLM03HD331SN1D
Murata's BLM03HD331SN1D is a chip bead data line filter with 330 Ohm output impedance, suitable for surface mount applications. With dimensions of L0.6xB0.3xH0.3 mm, it operates b/w -55 to 125°C and supports frequencies from 100 MHz to 1 GHz, offering low DC resistance of 1 ohm for effective filtering in electronic circuits.
BLM03AG121SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .5 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
BLM03AG241SN1D
Murata's BLM03AG241SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 0.6x0.3x0.3mm, it offers a max DC resistance of 0.8 ohm and output impedance of 240 ohm at frequencies up to 100 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BLM03BD121SN1D
Murata's BLM03BD121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of L0.6xB0.3xH0.3 mm, it offers a max frequency of 100 MHz and DC resistance of 0.5 ohm. Ideal for surface mount applications in electronic devices requiring impedance control at 120 ohms.
BLM03HB191SN1D
BLM03HB191SN1D by Murata Manufacturing is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter is commonly used for impedance matching in electronic devices.
BLM03BD241SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .8 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
BLM03HD102SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 2.9 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .12 A;
BLM03HD471SN1D
BLM03HD471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter is commonly used for surface mount applications to reduce electromagnetic interference in data lines.
BLM03BD471SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 1.5 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .215 A;
BLM03BD601SN1D
BLM03BD601SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used for surface mount applications to reduce noise in data lines.
BLM03BB121SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 1.5 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .1 A;
BLM03HG601SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 1.6 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .15 A;
BLM03HD601SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 1.7 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .15 A;
BLM03HG102SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 2.6 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .125 A;
BLM03AG102SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 2.5 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .1 A;
BLM03AX121SN1D
FERRITE BEAD; Construction: Chip Bead; Maximum DC Resistance: .23 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .45 A;
BLM03AG601SZ1D
FERRITE CHIP; Maximum DC Resistance: 1.6 ohm; Rated Current: .1 A; Screening Level: AEC-Q200; Height: .3 mm; No. of Terminals: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved