Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 73100-0069 RF BNC Connector has a low insertion loss of 0.2 dB and VSWR of 1.3, ideal for applications up to 4 GHz. With a panel mount feature, it offers a right-angle mounting style with bright tin over nickel termination for reliable commercial use.
Median Price
$3.233
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$2.746
100+ parts
$2.499
1k+ parts
$2.252
10k+ parts
-
Mouser Electronics
$6.620
$4.690
$3.610
DigiKey
$7.080
NEP Electronics
$2.634
Chip1Stop
$2.690
$2.140
Newark
$5.440
$5.140
Verical
$2.273
Master Electronics
$3.720
$3.160
$2.530
DF Sales Co.
$1.750
Digiode
$2.609
Vyrian
TestEquity
$4.960
IBS Electronics
$3.700
$2.038
$2.513
TME
$4.730
$3.810
VNN
Bristol Electronics
Atlantic Semiconductor
Inventory MP
Elcom Components
Nova Conductors
QIE Inc.
LWI Electronics Inc
EMSNET
Corphita
$2.471
Advanced Electronics
Andel Nordic
$6.435
$6.178
Modulus Dynamics
$7.402
Continental Prestige Electronics
Assy Fe
Argo Parts USA
Perfect Parts
Kepictronics
Aranea Global
Authorized Procurement Solutions
The panel mount feature allows for secure and stable connection to a panel, ensuring reliability in high vibration environments.
The compact body length of 0.581 inch makes this BNC connector suitable for applications with space constraints.
Low insertion loss of 0.2 dB ensures minimal signal degradation, making it ideal for high-performance RF applications.
The bright tin over nickel finish provides excellent conductivity and corrosion resistance, ensuring long-lasting performance.
The bayonet coupling type allows for quick and secure connection, making it easy to install and remove.
Polypropylene insulator material provides good electrical insulation and resistance to moisture, enhancing the connector's reliability.
With a maximum operating frequency of 4 GHz, this BNC connector is suitable for high-frequency signal transmission applications.
BNC Connectors 73100-0069 attributes and parameters. Explore more BNC Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Info.:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
73100-0069 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
PCN Assembly/Origin - Multiple Devices Move 10/Jan/2018
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203C
Idec
ROTARY SWITCH;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3GEY0R00V
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
KYOCERA AVX
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
R141075000W
Radiall S A
R141075000W by Radiall S A is a RF BNC connector with 50 ohm impedance, 0.13 dB insertion loss, and 1.22 VSWR. It features bayonet coupling, PTFE insulator, and crimp termination for applications up to 4 GHz in military and IEC compliant setups.
R141.426.000
Radiall S A's R141.426.000 BNC Connector features 0.05 dB Insertion Loss, 1.08 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 4 GHz, it is a female receptacle with gold-plated contacts for solder termination on boards and panels.
B6251G3-NPP3G-75T
Amphenol
Amphenol's B6251G3-NPP3G-75T is a RF BNC connector with bayonet coupling, polypropylene insulator, and 75 ohm impedance. It features solder termination, female contact gender, and jack body style for board mounting applications.
BNC7T-J-P-GN-ST-EM1
Samtec
The Samtec BNC7T-J-P-GN-ST-EM1 is a RF BNC connector with gold termination, bayonet coupling, and 75 ohm impedance. Ideal for applications requiring high frequency up to 6 GHz, such as commercial electronics. Features panel mount option and surface mount termination for versatile installation.
2599
Ddk
2599 by Ddk is a BNC Connector with Bayonet coupling, PTFE insulator, and RF BNC connector type. It has a VSWR of 1.3, 50 ohm impedance, and male contact gender. Ideal for cable mounting applications requiring a straight plug with clamp termination.
BJ27
Cinch Connectivity Solutions
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 20; Characteristic Impedance: 50 ohm; Termination Type: SOLDER;
M39012/16-0102
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; IEC Conformity: NO; Voltage Standing Wave Ratio: 1.3;
112515
Amphenol 112515 is an RF BNC connector with bayonet coupling, PTFE insulator, and 50 ohm impedance. Ideal for board mounting applications, featuring solder termination and female contact gender in a straight jack style.
B6252HB-NPP3G-75T
Amphenol's B6252HB-NPP3G-75T is a RF BNC connector with bayonet coupling, gold flash over nickel mating contact finish, and polypropylene insulator. It features solder termination and panel mount capability, making it ideal for board and panel mounting applications in various industries.
034-1018
Amphenol 034-1018 is a BNC connector with gold finish, bayonet coupling, and 75 ohm impedance. Ideal for RF applications up to 6 GHz, featuring solder termination and female contact gender for board mounting in straight style.
31-71008-RFX
Amphenol 31-71008-RFX is a BNC connector with 0.571" body diameter, 5000000000 ohm insulation resistance, and 2100VAC dielectric voltage. Ideal for RF applications up to 4 GHz, it features POLYTETRAFLUOROETHYLENE insulator material and BRASS shell construction for durability in commercial settings.
B1121E1-ND3G-5-50
Amphenol B1121E1-ND3G-5-50 is a RF BNC connector with Bayonet coupling, Acetal insulator, and Crimp termination. Ideal for cable mounting in applications requiring reliable male plug connectors.
M39012/16-0015
Amphenol's M39012/16-0015 BNC Connector features low 0.2 dB insertion loss, MIL conformity, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it has bayonet coupling and PTFE insulator for reliable performance in cable installations.
1-1478402-0
TE Connectivity 1-1478402-0 is a BNC Connector with PTFE insulator, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications, it features bayonet coupling, solder termination, and brass shell material for commercial reliability.
456E-717H
The Amphenol 456E-717H is a BNC connector with panel mount and filter feature. It has RF BNC connector type, solder termination, and female contact gender. Ideal for board and panel mounting in applications requiring right angle mounting style for RF connections.
5-227079-5
Tyco Electronics Amp
5-227079-5 by Tyco Electronics Amp is a BNC connector with Bayonet coupling, Polyethylene insulator, and 50 ohm impedance. It is used for RF applications requiring male crimp termination on cables.
R142334700
Radiall S A's R142334700 is a BNC Connector with Bayonet coupling, PTFE insulator, and 75 ohm impedance. Ideal for RF applications up to 6 GHz, it features panel mount capability and crimp termination for female contacts in straight mounting style.
5225395-6
TE Connectivity's 5225395-6 RF BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for applications requiring MIL conformity, it is a bayonet-coupled plug with fluoropolymer insulator for temperatures ranging from -55 to 85°C. Suitable for RG 142B/A cables in various setups.
HDBNC-J-P-GN-ST-TH1
Samtec's HDBNC-J-P-GN-ST-TH1 is a RF BNC connector with 75 ohm impedance, suitable for up to 6 GHz frequency. It features a dielectric voltage of 2100VAC and operates b/w -65°C to 125°C. Ideal for commercial applications requiring reliable signal transmission.
31-320-RFX
Amphenol 31-320-RFX is a BNC connector with 0.571" body diameter, 0.2 dB insertion loss, and 2100VAC dielectric voltage. Ideal for RF applications up to 4 GHz, it features bayonet coupling, PTFE insulator, and brass shell suitable for RG-58 cables.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73100-0153
Molex
Molex 73100-0153 BNC Connector features 0.38" body diameter, 0.656" body depth, and 0.2 dB insertion loss. Ideal for RF applications up to 4 GHz with 50 ohm impedance. Suitable for commercial use in board mounting setups.
73101-0040
Molex 73101-0040 RF BNC Connector features 75 ohm impedance, 0.2 dB insertion loss, and 1.3 VSWR. Ideal for commercial applications requiring a durable connector with a characteristic impedance of 75 ohm, suitable for frequencies up to 4 GHz. This right-angle receptacle connector is designed for board and panel mounting with solder termination.
73101-0120
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Contact Material: NOT SPECIFIED;
73100-0154
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Contact Material: PHOSPHOR BRONZE; Mating Contact Finish: NOT SPECIFIED;
73100-0105
Molex 73100-0105 BNC Connector features 0.38" body diameter, 0.2 dB insertion loss, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with right-angle mounting on boards.
73100-0016
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP SOLDER; Panel Mount: NO; Mounting Style: RIGHT ANGLE;
73101-0401
RF BNC CONNECTOR; Reliability: COMMERCIAL; Body Depth: 1.375 inch; Mounting Style: RIGHT ANGLE; Total No. of Contacts: 1; Termination Contact Finish: TIN;
73101-0400
Molex 73101-0400 is a BNC connector with RF type, right angle mounting style, and bright tin contact finish. It features a zinc alloy shell, polypropylene insulator material, and solder termination for commercial reliability. Ideal for board mounting applications requiring a compact 0.577" x 0.5" x 1.375" design with nickel shell finish.
73104-0
Pomona Electronics
RF BNC CONNECTOR;
73101-0570
Molex 73101-0570 is a BNC connector with 75 ohm impedance, suitable for RF applications up to 2 GHz. Featuring polypropylene insulation and zinc alloy shell, it offers high durability with 500 cycles. Ideal for board and panel mounting, this female jack connector has a right-angle style and solder termination.
73100-0131
The Molex 73100-0131 RF BNC Connector has a low insertion loss of 0.2 dB and a VSWR of 1.3, suitable for up to 4 GHz frequency applications. Featuring a right-angle mounting style, this female connector with solder termination is ideal for panel mount installations in commercial settings.
73100-0067
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Minimum Operating Temperature: -65 Cel;
73100-0070
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Terminal Length: .163 inch;
73100-0071
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; Panel Mount: YES;
73100-0090
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: BOARD; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
73100-0080
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Body Width: .613 inch;
73100-0223
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .542 inch; Termination Contact Finish: MATTE TIN OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved