Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73101-0040 RF BNC Connector features 75 ohm impedance, 0.2 dB insertion loss, and 1.3 VSWR. Ideal for commercial applications requiring a durable connector with a characteristic impedance of 75 ohm, suitable for frequencies up to 4 GHz. This right-angle receptacle connector is designed for board and panel mounting with solder termination.
Median Price
$5.680
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Verical
1+ parts
$6.350
100+ parts
$6.230
1k+ parts
$5.880
10k+ parts
-
Mouser Electronics
$9.260
$6.890
$6.020
$5.730
NEP Electronics
Master Electronics
$8.940
$7.250
$7.150
DigiKey
$2.590
$2.490
Chip1Stop
$5.010
$4.790
Farnell
$1.840
Nova Conductors
$2.258
Digiode
$2.299
Bristol Electronics
$7.410
$3.483
$3.186
VNN
Dan-Mar Components
IBS Electronics
$7.022
$6.641
$5.316
Vyrian
TME
Q Components
Semicontronic
$1.560
$1.521
$1.513
Continental Prestige Electronics
$2.085
$2.043
Argo Parts USA
Corphita
$2.178
Andel Nordic
$2.229
$2.140
Advanced Electronics
$2.562
$2.434
Aztec Data Supply Inc.
$9.273
Perfect Parts
Kepictronics
Assy Fe
Easy installation on panels for convenient use.
Compact size allows for space-saving installation.
High insulation resistance ensures signal integrity and reliability.
Low insertion loss helps in maintaining signal strength.
Compact width for efficient use of space.
Withstands high voltage for added safety.
Sufficient depth for secure connections.
Bayonet coupling ensures quick and secure connections.
Durable polypropylene material offers excellent insulation properties.
Nickel finish provides corrosion resistance for longevity.
RF BNC connector ensures high-frequency performance.
Low VSWR indicates efficient power transfer.
Compliance with UL standard ensures product quality.
Withstands 500 cycles of use for long-lasting performance.
Versatile mounting options for diverse applications.
Matches impedance requirements for optimal signal transmission.
Solder termination for secure and reliable connections.
Female contact for compatibility with male connectors.
Receptacle design for easy insertion of male connectors.
Right angle mounting for efficient cable routing.
Coaxial contact style for high-frequency applications.
Optimal terminal length for secure connections.
Locking mounting option ensures secure installation.
Supports high-frequency signals up to 4 GHz.
Commercial-grade reliability for consistent performance.
BNC Connectors 73101-0040 attributes and parameters. Explore more BNC Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Reference Standard:
Reliability:
Shell Finish:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
73101-0040 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
PCN Assembly/Origin - Multiple Devices Move 10/Jan/2018
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Digitron Semiconductors
Onsemi
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
Surge Components
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
034-1018
Amphenol
Amphenol 034-1018 is a BNC connector with gold finish, bayonet coupling, and 75 ohm impedance. Ideal for RF applications up to 6 GHz, featuring solder termination and female contact gender for board mounting in straight style.
2-329452-2
TE Connectivity
TE Connectivity's 2-329452-2 BNC Connector features a body diameter of 0.505" and depth of 1.312". With a max operating frequency of 4 GHz, it is ideal for RF applications requiring a characteristic impedance of 50 ohm. The connector has a bayonet coupling type, PTFE insulator material, and is MIL conformant for reliable commercial use.
112165
Amphenol 112165 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. It is an RF connector for cable mounting with crimp termination. Ideal for applications requiring a female contact gender, plug body style, and right-angle mounting.
112405-10-2
RF BNC CONNECTOR;
112417
The Amphenol 112417 is a BNC connector with gold termination, bayonet coupling, and polypropylene insulator. It has a characteristic impedance of 75 ohm and solder termination for RF applications. Ideal for board mounting in RF systems requiring female contact gender and right-angle mounting style.
31-71008-RFX
Amphenol 31-71008-RFX is a BNC connector with 0.571" body diameter, 5000000000 ohm insulation resistance, and 2100VAC dielectric voltage. Ideal for RF applications up to 4 GHz, it features POLYTETRAFLUOROETHYLENE insulator material and BRASS shell construction for durability in commercial settings.
B6251G3-NPP3G-75T
Amphenol's B6251G3-NPP3G-75T is a RF BNC connector with bayonet coupling, polypropylene insulator, and 75 ohm impedance. It features solder termination, female contact gender, and jack body style for board mounting applications.
413557-2
Tyco Electronics Amp
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Characteristic Impedance: 50 ohm; MIL Conformity: NO; Filter Feature: NO; IEC Conformity: NO;
D-621-0036
TE Connectivity's D-621-0036 is a BNC connector with bayonet coupling, PES insulator, and max temp of 125°C. Ideal for RF applications, it has a polarized key, solder termination, and female contact gender. Suitable for cable and panel mounting in 115/230VAC systems.
751-10-9
Winchester Interconnect
751-10-9 BNC Connector by Winchester Interconnect features 0.12 dB insertion loss, gold over nickel termination, and bayonet coupling. Ideal for RF applications up to 4 GHz, it is a panel mount connector with a 50 ohm impedance and crimp termination. Suitable for cable and panel mounting in various electronic systems.
R141.082.161
Radiall S A
The Radiall S A R141.082.161 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance for RF applications up to 4 GHz. With gold over nickel termination, this bayonet-coupling connector is ideal for crimp termination on cables in male plug configuration.
1274571-1
TE Connectivity's 1274571-1 is a BNC Connector with insulator resistance of 1000000000 ohm, operating temperature range from -40 to 85 °C, and characteristic impedance of 75 ohm. Ideal for RF applications due to its bayonet coupling type, POLYTETRAFLUOROETHYLENE insulator material, and brass shell construction.
112659
Amphenol 112659 is a BNC connector with bayonet coupling, PTFE insulator, and nickel shell finish. Ideal for RF applications on boards, it features brass shell material, solder termination, and right-angle mounting style for secure commercial use.
5413631-1
TE Connectivity's 5413631-1 BNC Connector features 50 ohm impedance, polymethylpentene insulator, and bayonet coupling. Ideal for RF applications with a max frequency of 4 GHz, it offers durability up to 500 cycles and operates b/w -55°C to 85°C.
M39012/17-0101
Delta Electronics Manufacturing
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Additional Features: STANDARD: MIL-PRF-39012, APPLICABLE CABLES: RG 58, RG 179, RG 303, CAPTIVE CONTACT; MIL Conformity: YES;
112803
Amphenol 112803 is a BNC connector with gold termination, PTFE insulator, and nickel shell. It has a VSWR of 1.15, impedance of 75 ohm, and operates up to 3 GHz. Ideal for RF applications requiring reliable commercial-grade connectors with straight mounting and locking option.
112426
Amphenol 112426 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. Ideal for RF applications with 50 ohm impedance, it features panel mount and solder termination for female contacts in straight mounting style.
M39012/20-0007
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Coupling Type: BAYONET; Additional Features: STANDARD: MIL-PRF-39012, APPLICABLE CABLES: RG 142, RG 223, RG 303, RG 400, CAPTIVE CONTACT;
73131-5013
Molex
Molex 73131-5013 BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for RF applications requiring reliable signal transmission up to 4 GHz with a low insertion loss of 0.2 dB. Suitable for commercial use in board and panel mounting setups due to its female coax contact style.
31-70008
Amphenol 31-70008 BNC Connector features gold finish, bayonet coupling, and PTFE insulator. Ideal for RF applications with 75 ohm impedance, 1.9 VSWR, and up to 4 GHz frequency. Male crimp termination for cable mounting in straight style plug configuration.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73100-0153
Molex 73100-0153 BNC Connector features 0.38" body diameter, 0.656" body depth, and 0.2 dB insertion loss. Ideal for RF applications up to 4 GHz with 50 ohm impedance. Suitable for commercial use in board mounting setups.
73101-0120
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Contact Material: NOT SPECIFIED;
73100-0154
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Contact Material: PHOSPHOR BRONZE; Mating Contact Finish: NOT SPECIFIED;
73100-0105
Molex 73100-0105 BNC Connector features 0.38" body diameter, 0.2 dB insertion loss, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with right-angle mounting on boards.
73100-0016
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP SOLDER; Panel Mount: NO; Mounting Style: RIGHT ANGLE;
73101-0401
RF BNC CONNECTOR; Reliability: COMMERCIAL; Body Depth: 1.375 inch; Mounting Style: RIGHT ANGLE; Total No. of Contacts: 1; Termination Contact Finish: TIN;
73101-0400
Molex 73101-0400 is a BNC connector with RF type, right angle mounting style, and bright tin contact finish. It features a zinc alloy shell, polypropylene insulator material, and solder termination for commercial reliability. Ideal for board mounting applications requiring a compact 0.577" x 0.5" x 1.375" design with nickel shell finish.
73104-0
Pomona Electronics
73101-0570
Molex 73101-0570 is a BNC connector with 75 ohm impedance, suitable for RF applications up to 2 GHz. Featuring polypropylene insulation and zinc alloy shell, it offers high durability with 500 cycles. Ideal for board and panel mounting, this female jack connector has a right-angle style and solder termination.
73100-0131
The Molex 73100-0131 RF BNC Connector has a low insertion loss of 0.2 dB and a VSWR of 1.3, suitable for up to 4 GHz frequency applications. Featuring a right-angle mounting style, this female connector with solder termination is ideal for panel mount installations in commercial settings.
73100-0069
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Contact Style: COAX;
73100-0067
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Minimum Operating Temperature: -65 Cel;
73100-0070
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Terminal Length: .163 inch;
73100-0071
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; Panel Mount: YES;
73100-0090
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: BOARD; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
73100-0080
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Body Width: .613 inch;
73100-0223
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .542 inch; Termination Contact Finish: MATTE TIN OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved