Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73100-0153 BNC Connector features 0.38" body diameter, 0.656" body depth, and 0.2 dB insertion loss. Ideal for RF applications up to 4 GHz with 50 ohm impedance. Suitable for commercial use in board mounting setups.
Median Price
$3.940
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Verical
1+ parts
$3.470
100+ parts
-
1k+ parts
$2.950
10k+ parts
$2.580
Heilind Electronics
$4.189
$3.524
$3.364
Interstate Connecting
Mouser Electronics
$6.050
$4.250
$3.300
$2.970
Newark
$6.240
$4.440
$4.020
Master Electronics
$3.170
$2.690
$2.160
DigiKey
$3.690
$3.140
$2.730
Chip1Stop
$2.600
$2.060
Digiode
$3.287
Nova Conductors
$3.330
TestEquity
IBS Electronics
$3.920
$3.328
$2.665
TME
$5.570
$4.260
$3.730
Vyrian
VNN
Bristol Electronics
Semi Source
Semicontronic
$2.210
$2.155
$2.144
Modulus Dynamics
$3.056
$3.026
$2.934
Corphita
$3.114
Aztec Data Supply Inc.
$3.161
Continental Prestige Electronics
$3.263
Argo Parts USA
Netroflash
Andel Nordic
$7.253
$6.963
Kepictronics
Robosynatics
$32.682
Lucentia Tech
Perfect Parts
Small body diameter allows for easy installation in compact spaces.
Low insertion loss ensures minimal signal degradation and optimal performance.
Adequate body depth provides stability and secure connection.
Bayonet coupling ensures quick and secure connections, ideal for frequent installations.
Polytetrafluoroethylene insulator offers excellent dielectric properties for signal transmission.
Nickel shell finish provides durability and corrosion resistance for long-lasting use.
RF BNC connector is suitable for radio frequency applications, ensuring reliable signal transmission.
Low VSWR of 1.3 indicates minimal signal reflections and efficient power transfer.
Standard 50 ohm impedance for compatibility with a wide range of RF equipment.
Brass shell material offers good conductivity and durability for reliable connections.
Solder termination ensures secure and stable connections for long-term use.
Female contact gender is commonly used for receiving signals, ensuring compatibility with various devices.
Receptacle style allows for easy mating with corresponding plugs, enhancing connectivity options.
Straight mounting style simplifies installation and alignment for efficient connectivity.
Coaxial contact style ensures proper signal transmission and minimal signal loss.
Optimal insertion force ensures secure connections without damaging the components.
Proper terminal length allows for secure soldering and reliable signal transmission.
Locking mounting option provides added security and stability for the connector.
High operating frequency of 4 GHz supports a wide range of applications requiring fast data transmission.
Commercial-grade reliability ensures consistent performance in various commercial applications.
BNC Connectors 73100-0153 attributes and parameters. Explore more BNC Connectors devices from Molex
Additional Features:
Body Depth:
Body Diameter:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insertion Loss:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
73100-0153 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
EU2B-YS3103F
Idec
ROTARY SWITCH;
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
R141407000
Radiall S A
R141407000 by Radiall S A is a BNC Connector with 0.13 dB Insertion Loss, 50 ohm Impedance, and 1.22 VSWR. Ideal for RF applications up to 4 GHz, it features Bayonet Coupling, Gold/Nickel Termination, and PTFE Insulator for MIL/IEC compliance in cable and panel mounting setups.
R316257000
Radiall S A's R316257000 BNC Connector has a 50 ohm impedance, 1.6 VSWR, and operates up to 2 GHz. It is a bayonet-coupling RF connector with PTFE insulator for cable and panel mounting. Ideal for applications requiring high-frequency signal transmission in various industries.
5414459-1
TE Connectivity
TE Connectivity's 5414459-1 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and bayonet coupling type. Ideal for RF applications with characteristic impedance of 75 ohm, it has a max operating frequency of 2 GHz and is designed for commercial reliability.
5226990-1
TE Connectivity's 5226990-1 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and bayonet coupling type. Ideal for RF applications, this connector has a characteristic impedance of 50 ohm, operates up to 4 GHz frequency, and is designed for commercial reliability.
031-5540
Amphenol
Amphenol 031-5540 is a BNC connector with 50 ohm impedance, bayonet coupling, and polyphenylene insulator. It has a dielectric voltage of 2100VAC, operates b/w -55 to 85°C, and withstands up to 1 GHz frequency. Ideal for RF applications requiring durable female receptacle connectors with solder termination in commercial settings.
M39012/16-0101
Automatic Connector
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Insertion Loss: .2 dB; Filter Feature: NO;
31-10-RFXG1
Amphenol's 31-10-RFXG1 is a BNC connector with panel mount capability. It has an insertion loss of 0.2 dB and a voltage standing wave ratio of 1.3, making it suitable for RF applications up to 4 GHz.
KC-19-258
Kings Electronics
Kings Electronics KC-19-258 BNC Connector features Bayonet coupling, PTFE insulator, 50 ohm impedance. Ideal for RF applications up to 4 GHz with panel and cable mounting options. Female contact gender, jack body style, and crimp solder termination ensure reliable connections.
M39012/24-0002
Amphenol's M39012/24-0002 BNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this hermetic connector is panel mountable with bayonet coupling for secure connections in military and aerospace systems.
5227161-3
TE Connectivity's 5227161-3 BNC Connector is a right angle jack with a body length of 0.625", width of 0.581", and depth of 0.625". It has a characteristic impedance of 50 ohm and can operate at temperatures ranging from -55 to 85°C. This connector is commonly used in RF applications up to 4 GHz.
M39012/16-0014
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; IEC Conformity: NO; Body or Shell Style: PLUG;
112426
Amphenol 112426 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. Ideal for RF applications with 50 ohm impedance, it features panel mount and solder termination for female contacts in straight mounting style.
112404
Amphenol's 112404 BNC Connector features Bayonet coupling, PTFE insulator, and 50 ohm impedance. Ideal for RF applications, it is a female solder connector with a jack body style for board mounting in straight orientation.
R141.426.000
Radiall S A's R141.426.000 BNC Connector features 0.05 dB Insertion Loss, 1.08 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 4 GHz, it is a female receptacle with gold-plated contacts for solder termination on boards and panels.
R141665161W
R141665161W by Radiall S A is a BNC Connector with Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 1.5 GHz, it features a female contact gender, solder termination, and right-angle mounting on boards. Operating temperatures range from -35°C to 70°C.
UG-959A/U
Amphenol Communications Solutions
UG-959A/U by Amphenol is a BNC Connector with 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. It features bayonet coupling for easy connection and PTFE insulator material for durability. Ideal for RF applications up to 4 GHz requiring reliable male plug connectors on cables.
KC-19-250
RF BNC CONNECTOR; Contact Gender: FEMALE; Termination Type: CRIMP SOLDER; Insulator Material: POLYTETRAFLUOROETHYLENE; IEC Conformity: NO; Panel Mount: YES;
5227222-3
TE Connectivity's 5227222-3 BNC Connector features 0.581" body length, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications with a max operating frequency of 4 GHz, this connector has a straight mounting style and is suitable for commercial use.
M39012/20-0503
Winchester Interconnect
M39012/20-0503 by Winchester Interconnect is a BNC connector with a low insertion loss of 0.3 dB and gold termination contact finish. It is MIL conformant and has a bayonet coupling type. This RF BNC connector is commonly used in applications up to 4 GHz, with a characteristic impedance of 50 ohm and right angle mounting style.
112409
Amphenol's 112409 is a BNC Connector with gold termination, bayonet coupling, and polypropylene insulator. Ideal for RF applications, it features panel mount capability and solder termination for female contact gender in board and panel mounting configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73101-0040
Molex
Molex 73101-0040 RF BNC Connector features 75 ohm impedance, 0.2 dB insertion loss, and 1.3 VSWR. Ideal for commercial applications requiring a durable connector with a characteristic impedance of 75 ohm, suitable for frequencies up to 4 GHz. This right-angle receptacle connector is designed for board and panel mounting with solder termination.
73101-0120
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Contact Material: NOT SPECIFIED;
73100-0154
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Contact Material: PHOSPHOR BRONZE; Mating Contact Finish: NOT SPECIFIED;
73100-0105
Molex 73100-0105 BNC Connector features 0.38" body diameter, 0.2 dB insertion loss, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with right-angle mounting on boards.
73100-0016
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP SOLDER; Panel Mount: NO; Mounting Style: RIGHT ANGLE;
73101-0401
RF BNC CONNECTOR; Reliability: COMMERCIAL; Body Depth: 1.375 inch; Mounting Style: RIGHT ANGLE; Total No. of Contacts: 1; Termination Contact Finish: TIN;
73101-0400
Molex 73101-0400 is a BNC connector with RF type, right angle mounting style, and bright tin contact finish. It features a zinc alloy shell, polypropylene insulator material, and solder termination for commercial reliability. Ideal for board mounting applications requiring a compact 0.577" x 0.5" x 1.375" design with nickel shell finish.
73104-0
Pomona Electronics
RF BNC CONNECTOR;
73101-0570
Molex 73101-0570 is a BNC connector with 75 ohm impedance, suitable for RF applications up to 2 GHz. Featuring polypropylene insulation and zinc alloy shell, it offers high durability with 500 cycles. Ideal for board and panel mounting, this female jack connector has a right-angle style and solder termination.
73100-0131
The Molex 73100-0131 RF BNC Connector has a low insertion loss of 0.2 dB and a VSWR of 1.3, suitable for up to 4 GHz frequency applications. Featuring a right-angle mounting style, this female connector with solder termination is ideal for panel mount installations in commercial settings.
73100-0069
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Contact Style: COAX;
73105-5003
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Material: BRASS; DIN Conformance: NO;
73100-0067
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Minimum Operating Temperature: -65 Cel;
73100-0071
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; Panel Mount: YES;
73100-0090
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: BOARD; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
73100-0133
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Maximum Operating Frequency: 4 GHz; Mounting Style: STRAIGHT;
73100-0080
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Body Width: .613 inch;
73100-0223
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .542 inch; Termination Contact Finish: MATTE TIN OVER NICKEL;
73104-5003
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Cable Types: RG-58; DIN Conformance: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved