Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73100-0154 BNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with right angle mounting on boards. Female contact gender with matte tin finish for solder termination.
Median Price
$2.530
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
$1.763
100+ parts
$1.324
1k+ parts
$1.126
10k+ parts
$1.054
Mouser Electronics
$2.310
$1.770
$1.450
$1.320
DigiKey
$2.800
$1.962
$1.626
-
Element14
$3.027
$2.435
$1.760
$1.578
Newark
$3.610
$2.200
Chip1Stop
$0.911
Verical
Farnell
$1.420
$1.350
Nova Conductors
$1.033
Digiode
TestEquity
$1.570
Rapid Electronics
$3.086
IBS Electronics
$1.475
$1.188
$1.012
TME
$2.110
$1.600
$1.280
Vyrian
VNN
A&K Electronics
Bristol Electronics
Aranea Global
$0.972
Argo Parts USA
Corphita
$1.251
Semicontronic
$2.280
$2.223
$2.212
Continental Prestige Electronics
$2.450
$1.530
$1.250
Aztec Data Supply Inc.
$3.737
CoreStaff
$7.643
$1.285
Andel Nordic
$7.681
$7.374
Kepictronics
Abacus Technologies
Perfect Parts
Low insertion loss ensures minimal signal degradation, making this product suitable for high-frequency applications.
Matte tin finish provides excellent conductivity and corrosion resistance, ensuring a reliable connection over time.
Bayonet coupling allows for quick and secure connections, ideal for applications where frequent mating and unmating is required.
Polypropylene insulator offers excellent electrical properties and durability, ensuring stable performance in various environmental conditions.
RF BNC connector is designed for high-frequency applications, providing reliable signal transmission up to 4 GHz.
Phosphor bronze contacts offer superior conductivity and durability, ensuring a long-lasting and reliable connection.
Low VSWR of 1.3 indicates minimal signal reflection and efficient power transfer, making this product suitable for high-performance RF systems.
Board mounting allows for easy installation onto circuit boards, making this product suitable for integration into electronic assemblies.
Standard 50 ohm impedance ensures compatibility with a wide range of RF equipment and systems.
Solder termination provides a secure and permanent connection, ensuring reliable performance in demanding applications.
Female contact gender allows for mating with male BNC connectors, providing versatility in system design and configuration.
Receptacle design offers a secure connection and easy mating with compatible connectors, enhancing overall system reliability.
Right-angle mounting saves space and allows for more flexible installation in tight or limited spaces.
With a maximum operating frequency of 4 GHz, this product is suitable for high-frequency RF applications requiring reliable signal transmission.
BNC Connectors 73100-0154 attributes and parameters. Explore more BNC Connectors devices from Molex
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
MIL Conformity:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
73100-0154 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Gulf Semiconductor
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LM7805CT/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
227161-2
TE Connectivity
TE Connectivity 227161-2 is a BNC Connector with body dimensions of 0.581" x 0.625" x 0.625". It has an insulation resistance of 5G ohm, operating temperature range from -55 to 85°C, and impedance of 50 ohm. Ideal for RF applications up to 4GHz, it features a bayonet coupling type and glass-filled polybutylene terephthalate insulator material.
413557-2
TE Connectivity's 413557-2 is a BNC connector with bayonet coupling, polyphenylene oxide insulator, and 50 ohm impedance. Ideal for RF applications at 115/230VAC, this plug-style connector features a straight mounting design.
M39012/16-0102
Kings Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.3; Mounting Type: CABLE; JESD-609 Code: e4;
1-1337432-0
TE Connectivity's 1-1337432-0 BNC Connector offers an Insulation Resistance of 5G ohm, Dielectric Withstanding Voltage of 2100VAC, and Insertion Loss of 0.2 dB. Ideal for RF applications with characteristic impedance of 75 ohm, it is a durable connector suitable for commercial use up to 2 GHz frequency.
JJKV0UG1300NOPPRTB
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; DIN Conformance: NO; EMI Shielded: NO; Filter Feature: NO;
31-5486-1010
Asc Capacitors
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Termination Type: SOLDER; MIL Conformity: NO; Panel Mount: YES; Mounting Type: BOARD AND PANEL;
5227222-3
TE Connectivity's 5227222-3 BNC Connector features 0.581" body length, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications with a max operating frequency of 4 GHz, this connector has a straight mounting style and is suitable for commercial use.
M39012/16-0014
Winchester Interconnect
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.3; Shell Material: BRASS; Termination Type: CRIMP;
M39012/16-0101
Amphenol
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-39012; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; Shell Material: BRASS;
R141327000
Radiall S A
Radiall S A's R141327000 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 5 GHz, with bayonet coupling, gold termination finish, and PTFE insulator.
5-1634500-2
TE Connectivity's 5-1634500-2 BNC Connector features a body diameter of 0.539", insulation resistance of 5000000000 ohm, and max operating frequency of 4 GHz. Ideal for RF applications, this connector has a bayonet coupling type, polymethylpentene insulator material, and is suitable for RG-58C/U cable termination.
5413194-2
TE Connectivity's 5413194-2 BNC Connector features bayonet coupling, polymethylpentene insulator, and 75 ohm impedance. Ideal for RF applications up to 4 GHz with a right-angle mounting style and solder termination.
031-70526-23
Amphenol 031-70526-23 BNC Connector features 5000000000 ohm Insulation Resistance, 2100VAC Dielectric Withstanding Voltage, and POLYTETRAFLUOROETHYLENE Insulator Material. Ideal for RF applications with a max operating frequency of 12 GHz, this connector offers durability with 500 cycles and operates in temperatures ranging from -65 to 165 °C.
034-1018
Amphenol 034-1018 is a BNC connector with gold finish, bayonet coupling, and 75 ohm impedance. Ideal for RF applications up to 6 GHz, featuring solder termination and female contact gender for board mounting in straight style.
R142.076.161
R142.076.161 by Radiall S A is a BNC Connector with 5000000000 ohm Insulation Resistance, 0.2 dB Insertion Loss, and 1000VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 1.5 GHz, it features GOLD contact finish, POLYTETRAFLUOROETHYLENE insulator, and BRASS shell material for durability in commercial settings.
1-1478064-0
TE Connectivity 1-1478064-0 is a BNC RF connector with bayonet coupling, PTFE insulator, brass contact material, and silver finish. It has 75 ohm impedance, operates up to 2 GHz frequency, suitable for cable termination in RF applications.
31-5431
Amphenol 31-5431 RF BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for panel mount applications with gold termination finish and bayonet coupling type. Suitable for board and panel mounting in RF systems requiring low VSWR.
M39012/16-0013
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; Filter Feature: NO; Termination Contact Finish: GOLD;
031-10
Amphenol 031-10 is a BNC Connector with bayonet coupling, suitable for RF applications. Featuring a body diameter of 0.015" and body depth of 0.471", it has a characteristic impedance of 50 ohm. With a max operating frequency of 1 GHz, this connector is ideal for cable and panel mounting in electronic systems.
R141075000W
R141075000W by Radiall S A is a RF BNC connector with 50 ohm impedance, 0.13 dB insertion loss, and 1.22 VSWR. It features bayonet coupling, PTFE insulator, and crimp termination for applications up to 4 GHz in military and IEC compliant setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73100-0153
Molex
Molex 73100-0153 BNC Connector features 0.38" body diameter, 0.656" body depth, and 0.2 dB insertion loss. Ideal for RF applications up to 4 GHz with 50 ohm impedance. Suitable for commercial use in board mounting setups.
73101-0040
Molex 73101-0040 RF BNC Connector features 75 ohm impedance, 0.2 dB insertion loss, and 1.3 VSWR. Ideal for commercial applications requiring a durable connector with a characteristic impedance of 75 ohm, suitable for frequencies up to 4 GHz. This right-angle receptacle connector is designed for board and panel mounting with solder termination.
73101-0120
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Contact Material: NOT SPECIFIED;
73100-0105
Molex 73100-0105 BNC Connector features 0.38" body diameter, 0.2 dB insertion loss, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with right-angle mounting on boards.
73100-0016
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP SOLDER; Panel Mount: NO; Mounting Style: RIGHT ANGLE;
73101-0401
RF BNC CONNECTOR; Reliability: COMMERCIAL; Body Depth: 1.375 inch; Mounting Style: RIGHT ANGLE; Total No. of Contacts: 1; Termination Contact Finish: TIN;
73101-0400
Molex 73101-0400 is a BNC connector with RF type, right angle mounting style, and bright tin contact finish. It features a zinc alloy shell, polypropylene insulator material, and solder termination for commercial reliability. Ideal for board mounting applications requiring a compact 0.577" x 0.5" x 1.375" design with nickel shell finish.
73104-0
Pomona Electronics
RF BNC CONNECTOR;
73101-0570
Molex 73101-0570 is a BNC connector with 75 ohm impedance, suitable for RF applications up to 2 GHz. Featuring polypropylene insulation and zinc alloy shell, it offers high durability with 500 cycles. Ideal for board and panel mounting, this female jack connector has a right-angle style and solder termination.
73100-0131
The Molex 73100-0131 RF BNC Connector has a low insertion loss of 0.2 dB and a VSWR of 1.3, suitable for up to 4 GHz frequency applications. Featuring a right-angle mounting style, this female connector with solder termination is ideal for panel mount installations in commercial settings.
73100-0069
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Contact Style: COAX;
73100-0067
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Minimum Operating Temperature: -65 Cel;
73100-0068
RF BNC CONNECTOR; Contact Gender: FEMALE; MIL Conformity: NO; Filter Feature: NO; Voltage Standing Wave Ratio: 1.3; Mounting Style: RIGHT ANGLE;
73100-0090
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: BOARD; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
73100-0122
RF BNC CONNECTOR; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Characteristic Impedance: 50 ohm; Insulator Material: POLYPROPYLENE; Maximum Operating Frequency: 4 GHz;
73100-0133
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Maximum Operating Frequency: 4 GHz; Mounting Style: STRAIGHT;
73100-0162
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: NO;
73100-0166
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; Body or Shell Style: RECEPTACLE; JESD-609 Code: e4;
73100-0167
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; Termination Contact Finish: Bright Tin (Sn) - with Nickel (Ni) barrier; Characteristic Impedance: 50 ohm;
73100-0134
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Filter Feature: YES; Termination Contact Finish: NOT APPLICABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved