Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol 112512 is a BNC connector with a body diameter of 0.571" and dielectric voltage of 1700VAC. It features gold termination, operates b/w -65 to 165°C, and has a characteristic impedance of 50 ohm. Ideal for RF applications up to 4GHz, it uses RG-316/U cable type with male contact gender in commercial settings.
Median Price
$4.560
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$3.440
100+ parts
$3.433
1k+ parts
$3.016
10k+ parts
-
Farnell
$4.280
$3.350
$2.940
Mouser Electronics
$4.840
$3.490
$3.120
$2.780
Newark
$5.570
$4.310
$3.850
Element14
$7.110
$5.140
$4.100
DigiKey
$11.790
Powell Electronics
$2.860
$2.380
Verical
$4.115
$3.600
PSC Electronics
DF Sales Co.
$2.330
FDH Electronics
$6.218
$5.029
$4.685
Nova Conductors
VNN
American Connector Supply Corp
MISTER SPROCKETS
North Shore Components
Microwave Components, LLC
Elcom Components
Semi Source
Gateway Technologies
$2.000
$1.780
Singapore Electronics
$2.200
$2.046
$1.958
$1.870
Continental Prestige Electronics
$3.900
$3.190
Ampacity Inc.
$5.160
Andel Nordic
$43.960
$30.772
Authorized Procurement Solutions
Netroflash
Argo Parts USA
Perfect Parts
The compact size of the body diameter allows for easy installation in tight spaces.
High dielectric withstanding voltage ensures safety and reliability in electrical connections.
Gold termination contact finish provides excellent conductivity and corrosion resistance for long-lasting performance.
The depth of the body provides stability and secure connection in applications.
Bayonet coupling type offers quick and secure connections, ideal for applications where frequent connections are required.
Acetal insulator material provides high insulation resistance and durability in various environmental conditions.
High maximum operating temperature ensures reliable performance in high-temperature environments.
Low minimum operating temperature allows for use in cold environments without compromising performance.
Nickel shell finish offers corrosion resistance and durability in various industrial applications.
RF BNC connector type is widely used in telecommunications and RF applications for its reliable performance.
Gold mating contact finish ensures low contact resistance and reliable signal transmission.
Low VSWR value indicates efficient power transfer and minimal signal loss in high-frequency applications.
Natural insulator color helps in easy identification and maintenance of the connector.
Cable mounting type allows for easy installation and connection to various cable types.
Standard 50 ohm impedance ensures compatibility with a wide range of RF equipment and systems.
Brass shell material offers good conductivity and durability for long-term use.
Compatible with RG-316/U cable types, commonly used in RF and telecommunications applications.
Crimp termination type provides a secure and reliable connection for cable terminations.
Male contact gender is commonly used for connections where the male plug fits into a female receptacle.
Plug-style body or shell allows for easy and quick connections without the need for additional tools.
Straight mounting style offers a simple and direct connection for various applications.
Coaxial contact style ensures efficient signal transmission and minimal signal loss in high-frequency applications.
Locking mounting option provides added security and stability in challenging environments.
Suitable for high-frequency applications up to 4 GHz, making it ideal for RF and telecommunications systems.
Designed for commercial applications, ensuring high reliability and performance in various industries and environments.
BNC Connectors 112512 attributes and parameters. Explore more BNC Connectors devices from Amphenol
Body Depth:
Body Diameter:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Style:
Coupling Type:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
112512 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
2510-14-234-1825, 2510142341825, 5307-01-461-5855, 5307014615855, 5330-00-969-8549, 5330009698549, 5950-01-506-0653, 5950015060653
NIIN
142341825, 014615855, 009698549, 015060653
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
EU2B-YS3103F
Idec
ROTARY SWITCH;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
51K204-400A5
Rosenberger Hochfrequenztechnik & Kg
51K204-400A5 by Rosenberger is a BNC Connector with 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and BAYONET Coupling Type. Ideal for RF applications up to 10 GHz, featuring POLYTETRAFLUOROETHYLENE insulator and 50 ohm impedance for high-frequency performance.
UG-959/U
Amphenol
UG-959/U by Amphenol is a BNC connector with 0.2 dB insertion loss and 50 ohm impedance. Featuring bayonet coupling, it has PTFE insulator for MIL conformity. Ideal for RF applications up to 4 GHz, this male plug connector is suitable for cable mounting with clamp solder termination.
M39012/16-0220
Defense Logistics Agency
M39012/16-0220 by Defense Logistics Agency is a BNC Connector with 0.2 dB Insertion Loss, 1.3 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 4 GHz, it features Bayonet Coupling and Crimp Termination for secure connections in military equipment.
73171-0700
Molex
The Molex 73171-0700 RF BNC Connector features a body length of 0.577", insertion loss of 0.12 dB, and dielectric voltage withstand of 2100VAC. Ideal for applications requiring a durable right-angle receptacle with 75 ohm impedance, such as commercial-grade RF connections up to 4 GHz frequency.
6-1337543-0
TE Connectivity
TE Connectivity 6-1337543-0 is a BNC Connector with gold finish, bayonet coupling, and polyethylene insulator. Ideal for RF applications up to 4 GHz, it features a 50 ohm impedance and solder termination. Suitable for board and panel mounting, this female connector has a right-angle style socket design.
31-4237
Amphenol 31-4237 BNC Connector with 0.2 dB insertion loss, 2100VAC dielectric voltage, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, featuring bayonet coupling and PTFE insulator for durability in commercial settings. Panel mountable with brass shell, solder termination, and hermetic sealing option for reliable performance.
5227161-9
TE Connectivity's 5227161-9 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and bayonet coupling type. Ideal for RF applications with a max operating frequency of 4GHz, this connector has a durable zinc alloy shell, black insulator color, and female contact gender.
M39012/24-0002
Delta Electronics Manufacturing
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-PRF-39012, CAPTIVE CONTACT; Body or Shell Style: RECEPTACLE; DIN Conformance: NO;
5-1634506-1
TE Connectivity's 5-1634506-1 BNC Connector features 50 ohm impedance, POLYMETHYLPENTENE insulator, and 4 GHz operating frequency. Ideal for RF applications, this connector has a durable zinc alloy shell with nickel finish and female coax contact gender.
112538
Amphenol 112538 is a BNC connector with bayonet coupling, PBT insulator, and RF type. Ideal for board mounting, solder termination, and jack body style. Commonly used in RF applications for secure connections.
CPMC7818
Cinch Connectivity Solutions
CPMC7818 by Cinch Connectivity Solutions is a BNC Connector with gold termination, bayonet coupling, and polymethylpentene insulator. Ideal for RF applications up to 2 GHz, it features crimp/solder termination and 75 ohm impedance for male connectors on cables.
112253
Amphenol 112253 is a BNC Connector with gold termination, bayonet coupling, and PTFE insulator. Ideal for RF applications with 75 ohm impedance, RG-179 cable compatibility, and female contact gender. Suitable for commercial use in panel or cable mounting configurations.
R141.008.000
Radiall S A
R141.008.000 by Radiall S A is a BNC connector with 0.563" body diameter, 5000000000 ohm insulation resistance, and 0.23 dB insertion loss. Ideal for RF applications up to 4 GHz, it features gold over nickel termination contact finish and PTFE insulator material for durability in commercial settings.
2-5329458-1
TE Connectivity's 2-5329458-1 BNC Connector features Bayonet coupling, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 2 GHz, it is a panel-mount connector with crimp termination for RG 187, RG 179, and RG 161 cables. Operating temperature ranges from -55°C to 85°C.
105-1171-1
Trompeter Electronics
105-1171-1 by Trompeter Electronics is a BNC Connector with Nickel finish, Bayonet coupling, and 50 ohm impedance. Ideal for RF applications, it features male gender, crimp termination, and straight mounting on cables.
M39012/24-0001
Amphenol's M39012/24-0001 BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for RF applications, it is MIL conformant with a bayonet coupling type and polytetrafluoroethylene insulator. Suitable for panel mounting, it has a hermetic option and operates b/w -65 to 165 °C.
031-70526-11
Amphenol's 031-70526-11 BNC Connector features 5000000000 ohm Insulation Resistance, 2100VAC Dielectric Withstanding Voltage, and -65 to 165 °C Operating Temperature. Ideal for RF applications with a max frequency of 12 GHz, this female connector has a bayonet coupling type and is made of polytetrafluoroethylene insulator material.
2-329063-1
TE Connectivity's 2-329063-1 BNC Connector features Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with MIL conformity, crimp termination, and a max operating temperature of 85°C.
R141.665.161
R141.665.161 by Radiall S A is a BNC connector with panel mount capability. It has an insertion loss of 0.04 dB and a voltage standing wave ratio of 1.08, making it suitable for RF applications up to 1.5 GHz.
112405-12
Amphenol's 112405-12 is a BNC connector with bayonet coupling, 0.461" body depth, and PTFE insulator. Ideal for RF applications, it features nickel finish, brass shell, and natural insulator color. Known for its commercial reliability, this jack-style connector offers straight mounting with locking option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
112533
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO; MIL Conformity: NO;
112588
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; MIL Conformity: NO; Mounting Type: CABLE;
112581
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; MIL Conformity: NO; Termination Contact Finish: GOLD;
112589
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; IEC Conformity: NO; Mating Contact Finish: GOLD;
112586
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Body or Shell Style: JACK; Mating Contact Finish: GOLD;
112515-75
Amphenol's 112515-75 is a BNC connector with 0.453" body diameter and 0.788" depth, featuring PTFE insulator and nickel shell finish. Ideal for RF applications with 75 ohm impedance, this jack-style connector mounts on boards via solder termination, ensuring reliable commercial performance.
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Manufacturer Series: 112538; Coupling Type: BAYONET;
112514
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; IEC Conformity: NO; Termination Type: CRIMP;
112554
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Filter Feature: NO; DIN Conformance: NO;
112580
Amphenol 112580 is a BNC RF connector with gold-plated contacts for female termination. It features bayonet coupling, PTFE insulator, and panel mount capability. Ideal for cable and panel mounting in RF applications requiring reliable signal transmission.
112508
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 75 ohm; IEC Conformity: NO; Termination Type: CRIMP;
112515
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; DIN Conformance: NO; MIL Conformity: NO;
112522
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Coupling Type: BAYONET;
112516
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; MIL Conformity: NO; Filter Feature: NO;
112596
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Coupling Type: BAYONET; Mating Contact Finish: NOT SPECIFIED;
112559
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Color: NATURAL; Mounting Option-1: LOCKING;
112587
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Filter Feature: NO; Termination Type: CRIMP;
112563
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
112558
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; Coupling Type: BAYONET;
112507
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Total No. of Contacts: 1; Termination Type: CRIMP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved